Hi, Ajay:
no matter high speed or OHCI, the kernel outputs nothing but reported DVD-ROM found while no media inserted.
usb 3-1: new high speed USB device using musb_hdrc and address 20
usb 3-1: device v1bcf p0c31 is not supported
scsi19 : usb-storage 3-1:1.0
scsi 19:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8C1 D.02 PQ: 0 ANSI: 0
scsi 19:0:0:0: Attached scsi generic sg0 type 5
usb 3-1: USB disconnect, address 20
root# mount
rootfs on / type rootfs (rw)
/dev/root on / type ext3 (rw,relatime,errors=continue,data=writeback)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
none on /dev type tmpfs (rw,relatime,size=1024k,nr_inodes=8192,mode=755)
/dev/mmcblk0p1 on /media/card type ext3 (rw,relatime,errors=continue,data=writeback)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
tmpfs on /var/volatile type tmpfs (rw,relatime)
tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777)
tmpfs on /media/ram type tmpfs (rw,relatime)
nothing mounted and could not mount the disc. even scsi device detected. already add cd-rom file system options in kernel
root:/media# cat /proc/scsi/scsi
Attached devices:
Host: scsi25 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: DVD+-RW UJ8C1 Rev: D.02
Type: CD-ROM ANSI SCSI revision: 00
don't know how to mount and how to make the cd-rom to be read.
Regards,
Power Pan