封装UITableViewController

很多界面会使用tableView，系统也提供了UITableViewController，基于它做一下简答的封装，实现tableView的圆角设置。

封装

• MMTableViewController.h

#import <UIKit/UIKit.h>

NS_ASSUME_NONNULL_BEGIN

@interface MMTableViewController : UITableViewController

// Set the rounded corners for section, if > 0 the section corner is round.
@property (nonatomic, assign) CGFloat sectionCornerRadius;

@end

NS_ASSUME_NONNULL_END

这里通过属性sectionCornerRadius来设置tableView的圆角。

• MMTableViewController.m

#import "MMTableViewController.h"

@interface MMTableViewController ()

@end

@implementation MMTableViewController

- (void)viewWillAppear:(BOOL)animated {
    [super viewWillAppear:animated];
    
}

- (void)viewDidLoad {
    [super viewDidLoad];
    
    // Uncomment the following line to preserve selection between presentations.
    // 默认是YES，在viewWillAppear:的时候会清空当前的cell，这里禁止此操作。
    self.clearsSelectionOnViewWillAppear = NO;
    
    // Uncomment the following line to display an Edit button in the navigation bar for this view controller.
    // self.navigationItem.rightBarButtonItem = self.editButtonItem;
}

- (void)setSectionCornerRadius:(CGFloat)sectionCornerRadius
{
    _sectionCornerRadius = sectionCornerRadius;
    
    // 去除tableView自带的线条，否则会和我们绘制的线条重合
    if (_sectionCornerRadius > 0) {
        self.tableView.separatorStyle = UITableViewCellSeparatorStyleNone;
    }
}

#pragma mark - Table view data source

- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView {
    return 0;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
    return 0;
}

- (void)tableView:(UITableView *)tableView willDisplayCell:(UITableViewCell *)cell forRowAtIndexPath:(NSIndexPath *)indexPath
{
    // 当 sectionCornerRadius > 0 时，设置圆角
    if (self.sectionCornerRadius > 0)
    {
        // 设置cell的背景色透明，否则边角上会显示出来。
        cell.backgroundColor = UIColor.clearColor;

        // 圆角大小
        CGFloat cornerRadius = self.sectionCornerRadius;
        
        CAShapeLayer *layer = [[CAShapeLayer alloc] init]; 
        CAShapeLayer *borderLayer = [[CAShapeLayer alloc] init]; 
        CAShapeLayer *backgroundLayer = [[CAShapeLayer alloc] init];
        
        CGMutablePathRef pathRef = CGPathCreateMutable();
        CGMutablePathRef borderPathRef = CGPathCreateMutable(); 
        
        CGRect bounds = CGRectInset(cell.bounds, 0, 0);
        
        // 是否需要画线，默认为NO
        BOOL addLine = NO;

        // 绘制每个section的第一个和最后一个row
        if (indexPath.row == 0 && indexPath.row == [tableView numberOfRowsInSection:indexPath.section]-1)
        {
            CGPathAddRoundedRect(pathRef, nil, bounds, cornerRadius, cornerRadius);
            CGPathAddRoundedRect(borderPathRef, nil, bounds, cornerRadius, cornerRadius);
        }
        // 绘制每个section的第一个cell
        else if (indexPath.row == 0)
        {
            CGPathMoveToPoint(pathRef, nil, CGRectGetMinX(bounds), CGRectGetMaxY(bounds));
            CGPathAddArcToPoint(pathRef, nil, CGRectGetMinX(bounds), CGRectGetMinY(bounds), CGRectGetMidX(bounds), CGRectGetMinY(bounds), cornerRadius);
            CGPathAddArcToPoint(pathRef, nil, CGRectGetMaxX(bounds), CGRectGetMinY(bounds), CGRectGetMaxX(bounds), CGRectGetMidY(bounds), cornerRadius);
            CGPathAddLineToPoint(pathRef, nil, CGRectGetMaxX(bounds), CGRectGetMaxY(bounds));
            
            CGPathMoveToPoint(borderPathRef, nil, CGRectGetMinX(bounds), CGRectGetMaxY(bounds));
            CGPathAddArcToPoint(borderPathRef, nil, CGRectGetMinX(bounds), CGRectGetMinY(bounds), CGRectGetMidX(bounds), CGRectGetMinY(bounds), cornerRadius);
            CGPathAddArcToPoint(borderPathRef, nil, CGRectGetMaxX(bounds), CGRectGetMinY(bounds), CGRectGetMaxX(bounds), CGRectGetMidY(bounds), cornerRadius);
            CGPathAddLineToPoint(borderPathRef, nil, CGRectGetMaxX(bounds), CGRectGetMaxY(bounds));
            
            addLine = YES;
        }
        // 绘制每个section的最后个cell
        else if (indexPath.row == [tableView numberOfRowsInSection:indexPath.section]-1)
        {
            CGPathMoveToPoint(pathRef, nil, CGRectGetMinX(bounds), CGRectGetMinY(bounds));
            CGPathAddArcToPoint(pathRef, nil, CGRectGetMinX(bounds), CGRectGetMaxY(bounds), CGRectGetMidX(bounds), CGRectGetMaxY(bounds), cornerRadius);
            CGPathAddArcToPoint(pathRef, nil, CGRectGetMaxX(bounds), CGRectGetMaxY(bounds), CGRectGetMaxX(bounds), CGRectGetMidY(bounds), cornerRadius);
            CGPathAddLineToPoint(pathRef, nil, CGRectGetMaxX(bounds), CGRectGetMinY(bounds));
            
            CGPathMoveToPoint(borderPathRef, nil, CGRectGetMinX(bounds), CGRectGetMinY(bounds));
            CGPathAddArcToPoint(borderPathRef, nil, CGRectGetMinX(bounds), CGRectGetMaxY(bounds), CGRectGetMidX(bounds), CGRectGetMaxY(bounds), cornerRadius);
            CGPathAddArcToPoint(borderPathRef, nil, CGRectGetMaxX(bounds), CGRectGetMaxY(bounds), CGRectGetMaxX(bounds), CGRectGetMidY(bounds), cornerRadius);
                CGPathAddLineToPoint(borderPathRef, nil, CGRectGetMaxX(bounds), CGRectGetMinY(bounds));
        }
        // 绘制每个section中间的cell
        else
        {
            CGPathAddRect(pathRef, nil, bounds);
            
            CGPathMoveToPoint(borderPathRef, nil, CGRectGetMinX(bounds), CGRectGetMinY(bounds));
            CGPathAddLineToPoint(borderPathRef, nil, CGRectGetMinX(bounds), CGRectGetMaxY(bounds));
            
            CGPathMoveToPoint(borderPathRef, nil, CGRectGetMaxX(bounds), CGRectGetMinY(bounds));
            CGPathAddLineToPoint(borderPathRef, nil, CGRectGetMaxX(bounds), CGRectGetMaxY(bounds));
            
            addLine = YES;
        }
        
        layer.path = pathRef;
        backgroundLayer.path = pathRef;
        CFRelease(pathRef);
        layer.fillColor = [UIColor colorWithWhite:1.f alpha:0.8f].CGColor; //填充颜色

        borderLayer.path = borderPathRef;
        CFRelease(borderPathRef);
        borderLayer.fillColor = [UIColor clearColor].CGColor;   //
        borderLayer.lineWidth = 1/[[UIScreen mainScreen] scale];
        borderLayer.strokeColor = tableView.separatorColor.CGColor;       //绘制边缘

        if (addLine == YES) {
            CALayer *lineLayer = [[CALayer alloc] init];
            CGFloat lineHeight = (1.f / [UIScreen mainScreen].scale);
            lineLayer.frame = CGRectMake(CGRectGetMinX(bounds)+10, bounds.size.height-lineHeight, bounds.size.width-20, lineHeight);
            lineLayer.backgroundColor = tableView.separatorColor.CGColor; //绘制中间间隔线
            [layer addSublayer:lineLayer];
        }
        UIView *testView = [[UIView alloc] initWithFrame:bounds];
        [testView.layer insertSublayer:layer atIndex:0];
        [testView.layer insertSublayer:borderLayer above:layer];
        testView.backgroundColor = UIColor.clearColor;
        cell.backgroundView = testView;
                  
        //以上方法存在缺陷当点击cell时还是出现cell方形效果，因此还需要添加以下方法
        UIView *selectedBackgroundView = [[UIView alloc] initWithFrame:bounds];
        backgroundLayer.fillColor = tableView.separatorColor.CGColor;
        [selectedBackgroundView.layer insertSublayer:backgroundLayer atIndex:0];
        selectedBackgroundView.backgroundColor = UIColor.clearColor;
        cell.selectedBackgroundView = selectedBackgroundView;
    }
}
@end

以上方法是借鉴了网上别人的实现方式，都大差不离。

cell向内缩进

一般的我们设置tableView圆角，会设置cell向内缩进，在自定义的cell里面添加如下设置：

// 设置cell向内缩进
- (void)setFrame:(CGRect)frame
{
    NSInteger insert = 45;
    frame.origin.x += insert;
    frame.size.width -= 2 * insert;
    
    [super setFrame:frame];
}

效果

圆角+缩进

直角+缩进：

默认