RK3288[android 7.1]调试笔记----- edp屏

最新推荐文章于 2024-07-30 16:47:38 发布

d海阔天空

最新推荐文章于 2024-07-30 16:47:38 发布

阅读量3.8k

点赞数

分类专栏：调试笔记文章标签： RK3288-7.1

本文链接：https://blog.csdn.net/MrDongShiYi/article/details/90756819

版权

调试笔记专栏收录该内容

29 篇文章 12 订阅

订阅专栏

1 找到在要编译的rk3288-evb-android-rk808-edp.dts
加入以下edp dts配置：

/dts-v1/;
#include "rk3288-evb.dtsi"
#include "rk3288-android.dtsi"
#include <dt-bindings/display/rk_fb.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/sensor-dev.h>


。。。。。。。。

// added  for edp start <<<
&edp {
	status = "okay";
};

&edp_phy {
	status = "okay";
};
 &route_edp {
	status = "okay";
};
&edp_in_vopb {
	status = "okay";
};
&edp_in_vopl {
	status = "disabled";
};
&edp_panel {
//	compatible = "simple-panel";
    compatible ="lg,lp079qx1-sp0v";
    backlight = <&backlight>;
	power-supply = <&vcc_lcd>;
	status = "okay";

	disp_timings: display-timings {
		native-mode = <&edp_panel_name>;

		edp_panel_name: timing0 {
			clock-frequency = <158000000>;
			hactive = <1920>;
			vactive = <1080>;
			hfront-porch = <48>;
			hsync-len = <4>;
			hback-porch = <310>;
			vfront-porch = <3>;
			vsync-len = <4>;
			vback-porch = <60>;
			hsync-active = <0>;
			vsync-active = <0>;
			de-active = <0>;
			pixelclk-active = <0>;
		};
	};
};

// added edp end >>>
。。。。。。。。

2.编译kernel,烧写固件，绑定edp成功会有以下log出现

[    1.535994] rockchip-drm display-subsystem: bound ff970000.dp (ops rockchip_dp_component_ops)
[    1.536006] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

在rk3288.dtsi中可以知道edp地址是ff970000

。。。。。。。。。。

edp: dp@ff970000 {
		compatible = "rockchip,rk3288-dp";
		reg = <0x0 0xff970000 0x0 0x4000>;
		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
		clock-names = "dp", "pclk";
		power-domains = <&power RK3288_PD_VIO>;
		phys = <&edp_phy>;
		phy-names = "dp";
		resets = <&cru SRST_EDP>;
		reset-names = "dp";
		rockchip,grf = <&grf>;
		status = "disabled";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;
			edp_in: port@0 {
				reg = <0>;
				#address-cells = <1>;
				#size-cells = <0>;
				edp_in_vopb: endpoint@0 {
					reg = <0>;
					remote-endpoint = <&vopb_out_edp>;
				};
				edp_in_vopl: endpoint@1 {
					reg = <1>;
					remote-endpoint = <&vopl_out_edp>;
				};
			};
		};
	};
。。。。。。。。。