前言
在日常工作中，我们经常需要对excel文件中的数据进行清洗，剔除掉我们不需要的数据，抓取我们想要的数据，并把想要的数据保存在新的excel中，再对新的清洗后的excel进行一些数据可视化分析等操作。那在本博文接下来所讲的内容里，我使用pandas、openpyxl、re等模块对数据进行清洗；然后利用pandas、openpyxl把清洗后的数据存在新的excel中；最后利用matplotlib.pyplot、matplotlib.patches、re、datetime、os、glob等模块对清洗好的数据表格进行数据可视化分析。本文中所讲的代码绘制的是一些工程用图，这里不便展示。本文重点介绍代码的逻辑结构和思想，以及对一些细节的处理。
一、项目背景：
在我们的日常工作中，经常会遇到数据很杂乱的表格，而我们想要的数据就分布在这些杂乱的表格中。此时，我们就需要把我们想要的数据从这些杂乱的表格中提取出来，单独存放在我们想要的位置。那么，本博文就从这个角度来深度解析如何实现这一功能！
二、输入的.xlsx文件的sheet名样板和脚本主体逻辑架构图：
1.输入的.xlsx文件的sheet名样板
2.脚本主体逻辑架构图
三、脚本功能模块解析
1.引入库
代码如下：
import numpy as np
import pandas as pd
import matplotlib.patches as patches
import matplotlib.pyplot as plt
import datetime as dt
import openpyxl
from openpyxl.utils import get_column_letter
import re
import os
import glob
import warnings
warnings.filterwarnings('ignore')
2.设置pandas在console的输出模式为显示所有的列
代码如下：
pd.options.display.max_columns = None
3.获取Output文件夹下的.xlsx文件的相对路径
代码如下：
# 获取当前脚本文件所在目录
path_current = os.getcwd()
# 获取当前脚本文件所在目录的上一级目录
path_pardir = os.path.dirname(path_current)
print('$$$path_pardir:', path_pardir)
file_lists = glob.glob(path_pardir + '/Output/*.xlsx')
print('$$$file_lists:', file_lists)
4.初始化定义
代码如下：
# 先定义好需要提取的有效信息的列名
column_common = ['lot_id', 'wf_id', 'die_x', 'die_y', 'SBIN_NUM']
# column_private = ['Istandby:VDD[1]', 'Istandby:VDDI[1]', 'Istandby:VDD_SRAM[1]', 'Istandby:VDDIO[1]',
# 'Scan_HV', 'Scan_MV', 'Scan_LV', 'M6N_HV', 'M6N_MV', 'M6N_LV', 'Data_Retention_0', 'Data_Retention_1']
abnormal_character_set = ['/', '\\', ':', '*', '"', '<', '>', '|', '?']
5.编写一个画圆的函数
代码如下：
def cycle_picture():
fig = plt.figure(figsize=(8, 8), dpi=100)
ax = fig.add_subplot(111)
theta = np.arange(0, 2 * np.pi, 0.01)
x = 5 + 5.5 * np.cos(theta)
y = 4 + 4.5 * np.sin(theta)
# plt.vlines(np.arange(-0.5, 11, 1), -0.5, 8.5, linestyles='--')
# plt.hlines(np.arange(-0.5, 9, 1), -0.5, 10.5)
plt.plot(x, y, color='Black')
ax.xaxis.set_ticks_position('top')
plt.xticks(np.arange(-1, 12, 1))
plt.yticks(np.arange(-1, 9, 1))
ax.invert_yaxis()
# plt.show()
return ax
6.编写一个绘制FBC的函数
代码如下：
def FBC_draw(die_X, die_Y, list_FBC_temp, lot, wafer, list_FBC_item, local_Path):
color_dict = {'1': '#00FF00', '2': '#32CD32', '3': '#90EE90', '4': '#F0E68C', '5': '#FFFF00', '6': '#FFA500',
'7': '#FF8C00', '8': '#FF7F50', '9': '#FF4500', '10': '#FF6347', '11': '#CD5C5C', '12': 'FF0000',
'13': '#8B0000'}
ax = cycle_picture()
for X, Y, FBC_v in zip(die_X, die_Y, list_FBC_temp):
# 以下if结构中用FBC_v的大小来衡量每个die该赋的颜色, 文字, 以及文字大致居中时所需的X轴的坐标偏移量
if FBC_v >= 268435456:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '12'
pv = str(temp_pv) + 'M'
shift_v = 0.4
elif 67108864 <= FBC_v < 268435456:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '12'
pv = str(temp_pv) + 'M'
shift_v = 0.4
elif 8388608 <= FBC_v < 67108864:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '9'
pv = str(temp_pv) + 'M'
shift_v = 0.4
elif 2097152 <= FBC_v < 8388608:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '9'
pv = str(temp_pv) + 'M'
shift_v = 0.3
elif 1048576 <= FBC_v < 2097152:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '5'
pv = str(temp_pv) + 'M'
shift_v = 0.2
elif 524288 <= FBC_v < 1048576:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '5'
pv = str(temp_pv) + 'M'
shift_v = 0.2
elif 104858 <= FBC_v < 524288:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '4'
pv = str(temp_pv) + 'M'
shift_v = 0.2
elif 1000 <= FBC_v < 104858:
temp_pv = round(FBC_v / 1024, 1)
color = '4'
pv = str(temp_pv) + 'K'
shift_v = 0.4
elif 100 <= FBC_v < 1000:
pv = FBC_v
color = '4'
shift_v = 0.3
elif 50 <= FBC_v < 100:
pv = FBC_v
color = '3'
shift_v = 0.2
elif 10 <= FBC_v < 50:
pv = FBC_v
color = '3'
shift_v = 0.2
elif 0 < FBC_v < 10:
pv = FBC_v
color = '3'
shift_v = 0.1
elif FBC_v == 0:
pv = FBC_v
color = '1'
shift_v = 0.1
else:
pv = FBC_v
color = '12'
shift_v = 0.1
# 画出对应的die的形状Rectangle, 透明度alpha, 表面填充颜色, 边缘线条颜色, 线宽
ax.add_patch(patches.Rectangle([X - 0.5, Y - 0.5], 1, 1, alpha=0.8, facecolor=color_dict[color], edgecolor='k', linewidth=2))
# 画出每个die上的文字, 即需要显示的Fail bit count的大小
plt.text(X - shift_v, Y + 0.08, pv, fontsize=12)
for abnormal_character in abnormal_character_set:
list_FBC_item = str(list_FBC_item).replace(abnormal_character, ' ')
# 画出每片Wafer的标题
plt.text(1, -0.77, str(lot) + '_W' + str(wafer) + '_' + str(list_FBC_item) + '_FBC_Map', size=14)
# 调整subplot的参数
plt.subplots_adjust(top=0.95, bottom=0, left=0, right=1, hspace=0, wspace=0)
# 保存画好的FBC_Map图, bbox_inches='tight'以紧凑型保存, 并格式化命名
plt.savefig(local_Path + '/' + str(lot) + '_W' + str(wafer) + '_' + str(list_FBC_item) + '_FBC_Map.jpg', bbox_inches='tight')
# ion函数开始matplotlib的交互模式, 即遇到plt.show()函数时会继续执行
# plt.ion()
# plt.show()
plt.close()
7.编写一个绘制ISB的函数
代码如下：
def ISB_draw(die_X, die_Y, list_Isb_temp, lot, wafer, list_Isb_item, local_Path):
color_dict = {'1': '#00FF00', '2': '#32CD32', '3': '#90EE90', '4': '#F0E68C', '5': '#FFFF00', '6': '#FFA500',
'7': '#FF8C00', '8': '#FF7F50', '9': '#FF4500', '10': '#FF6347', '11': '#CD5C5C', '12': 'FF0000',
'13': '#8B0000'}
ax = cycle_picture()
for X, Y, ISB_v in zip(die_X, die_Y, list_Isb_temp):
pv = abs(float(ISB_v))
if 200 <= pv < 999999:
# pv = str(round(pv / 1000, 2)) + 'K' if pv >= 1000 else round(pv, 1)
# pv = round(pv, 1)
pv = round(pv, 2)
para_v = '4'
shift_v = 0.4
elif 150 <= pv < 200:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.4
elif 100 <= pv < 150:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.4
elif 80 <= pv < 100:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.3
elif 50 <= pv < 80:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.25
elif 30 <= pv < 50:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.3
elif 10 <= pv < 30:
pv = round(pv, 2)
para_v = '3'
shift_v = 0.3
elif 0 <= pv < 10:
pv = round(pv, 2)
para_v = '1'
shift_v = 0.2
else:
pv = round(pv, 2)
para_v = '13'
shift_v = 0.2
ax.add_patch(patches.Rectangle([X - 0.5, Y - 0.5], 1, 1, alpha=0.8, facecolor=color_dict[para_v], edgecolor='k',
linewidth=2))
# 画出每个die上的文字, 即需要显示的Fail bit count的大小
plt.text(X - shift_v, Y + 0.08, pv, fontsize=10)
for abnormal_character in abnormal_character_set:
list_Isb_item = str(list_Isb_item).replace(abnormal_character, ' ')
plt.text(1, -0.77, str(lot) + '_W' + str(wafer) + '_' + str(list_Isb_item) + '_Map', size=14)
plt.subplots_adjust(top=0.95, bottom=0, left=0, right=1, hspace=0, wspace=0)
plt.savefig(local_Path + '/' + str(lot) + '_W' + str(wafer) + '_' + str(list_Isb_item) + '_Map.jpg', bbox_inches='tight')
# plt.ion()
# plt.pause()
# plt.show()
plt.close()
8.编写一个绘制Bin的函数
代码如下：
def Bin_draw(die_X, die_Y, bin, lot, wafer, local_Path):
ax = cycle_picture()
color_dict = {1: '#00FF00', 2: '#FF0000', 4: '#800000', 7: '#FFA500', 8: '#FF4500', 9: '#FFFF00',
10: '#7B68EE', 11: '#800080', 12: '#008080', 13: '#F08080', 14: '#BC8F8F', 15: '#CD5C5C',
16: '#87CEFA', 17: '#D4F2E7', 30: '#DA70D6', 31: '#9932CC', 32: '#0000FF', 36: '#FF00FF',
40: '#00FFFF', 44: '#1E90FF', 48: '#FF69B4', 49: '#FF6347', 66: '#FF69B4'}
for X, Y, bin_v in zip(die_X, die_Y, bin):
# 若First Fail Bin 不在color_dict的键值中, 则一律将其颜色赋值为color_dict中键值42的颜色值
if bin_v in color_dict.keys():
bin_v_index = bin_v
else:
bin_v_index = 66
ax.add_patch(patches.Rectangle([X - 0.5, Y - 0.5], 1, 1, alpha=0.8, facecolor=color_dict[bin_v_index], edgecolor='k', linewidth=2))
shift_v = 0.08 if len(str(bin_v)) == 1 else 0.2
plt.text(X - shift_v, Y + 0.08, bin_v, fontsize=18)
# 画图例
legend = [[1, 2, 4, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 30, 31, 32, 36, 40, 44, 48, 49, 66]]
colcolor = ['#00FF00', '#FF0000', '#800000', '#FFA500', '#FF4500', '#FFFF00', '#7B68EE', '#800080', '#008080',
'#F08080', '#BC8F8F', '#CD5C5C', '#87CEFA', '#D4F2E7', '#DA70D6', '#9932CC', '#0000FF', '#FF00FF',
'#00FFFF', '#1E90EF', '#FF69B4', '#FF6347', '#FF69B4']
plt.table(loc='bottom', cellText=legend, cellLoc='center', colColours=colcolor, rowLabels=['Bin'])
# 画标题
plt.text(3.5, -0.77, str(lot) + '_W' + str(wafer) + '_Bin_Map', size=14)
plt.subplots_adjust(top=0.95, bottom=0, left=0, right=1, hspace=0, wspace=0)
plt.savefig(local_Path + '/' + str(lot) + '_W' + str(wafer) + '_Bin_Map.jpg', bbox_inches='tight')
# plt.ion()
# plt.show()
# plt.pause()
plt.close()
9.编写主体main函数
代码如下：
if __name__ == '__main__':
print('程序正在运行, 请稍等...')
count = 1
for file in file_lists:
print('=' * 30)
print('正在处理第{}/{}个xlsx文件...'.format(count, len(file_lists)))
######################################################################
######################################################################
# 清洗.xlsx数据
df_dict = pd.read_excel(file, sheet_name=None)
sheet_name_list = list(df_dict)
# print('$$$sheet_name_list:', sheet_name_list)
sheet_name_sel_list = []
for sheet_name in sheet_name_list:
if re.match(r'.*STDF.*', sheet_name, re.I):
sheet_name_sel = re.match(r'.*STDF.*', sheet_name, re.I)
sheet_name_sel_list.append(sheet_name_sel.group())
# print('$$$sheet_name_sel_list:', sheet_name_sel_list)
######################################################################
# 先提取共通的信息['lot_id', 'wf_id', 'die_x', 'die_y', 'SBIN_NUM']
df_common_sel = df_dict[sheet_name_sel_list[0]]
df_common = df_common_sel[column_common]
# print('$$$df_common:', df_common)
######################################################################
# 再提取非共通的信息['Istandby:VDD[1]', 'Istandby:VDDI[1]', 'Istandby:VDD_SRAM[1]', 'Istandby:VDDIO[1]',
# 'Scan_HV', 'Scan_MV', 'Scan_LV', 'M6N_HV', 'M6N_MV', 'M6N_LV', 'Data_Retention_0', 'Data_Retention_1']
column_private_dict = {}
for sheet_name_var in sheet_name_sel_list:
df_private_sel = df_dict[sheet_name_var]
column_list = list(df_private_sel)
for cols in column_list:
if re.match(r'.*Istandby:VDD\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Istandby:VDDI\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Istandby:VDD_SRAM\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Istandby:VDDIO\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Scan_HV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Scan_MV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Scan_LV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*M6N_HV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*M6N_MV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*M6N_LV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Data_Retention_0.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Data_Retention_1.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
# print('$$$column_private_dict:', column_private_dict)
num = 1
for key in list(column_private_dict):
df_tmp = df_dict[key][column_private_dict[key]]
if num == 1:
df_concat = pd.concat([df_common, df_tmp], axis=1)
else:
df_concat = pd.concat([df_concat, df_tmp], axis=1)
num += 1
# print('$$$df_concat:', df_concat)
# print('$$$list(df_concat):', list(df_concat))
Lot_ID = df_concat['lot_id'][0]
Wafer_ID = df_concat['wf_id'][0]
# VDDIO = df_concat['0:Istandby:VDDIO[1]']
# print('$$$VDDIO:', VDDIO)
df_concat.set_index('lot_id', inplace=True)
path_str = ''
if len(str(Wafer_ID)) == 1:
path_str = '_W0'
elif len(str(Wafer_ID)) == 2:
path_str = '_W'
output_path = path_pardir + '/Output/' + str(Lot_ID) + path_str + str(Wafer_ID) + '.xlsx'
df_concat.to_excel(output_path)
######################################################################
######################################################################
# 设置清洗后的表格的内部格式
wb = openpyxl.load_workbook(output_path)
ws = wb.active
# 冻结窗口
ws.freeze_panes = 'F2'
# 字体微软雅黑, 加粗
font = openpyxl.styles.Font('微软雅黑', bold=True)
# 填充色为深橙色FF8C00
fill = openpyxl.styles.PatternFill(fill_type='solid', start_color='FF8C00')
# 计算每列最大宽度, 并存储在列表col_widths中
col_widths = []
for i in range(1, ws.max_column + 1):
# 定义初始列宽col_width, 并在每个行循环完成后重置
col_width = 1
# 从第二行开始, 因为第一行为列标签, 即不计算第一行的列标签的宽度, 后面让其自动换行即可
for j in range(2, ws.max_row + 1):
cell_value = ws.cell(row=j, column=i).value
# 中文占用多个字节, 需要分开处理
if isinstance(cell_value, str):
# gbk解码一个中文两字节, utf-8一个中文三字节, gbk合适
col_width_real = len(cell_value.encode('gbk'))
else:
col_width_real = len(str(cell_value))
if col_width < col_width_real:
col_width = col_width_real
col_widths.append(col_width)
# 设置列宽
for i in range(1, ws.max_column + 1):
# 将数字转化为列名, 26个字母以内也可以用[chr(i).upper() for i in range(97, 123)], 不用导入模块
col_name = get_column_letter(i)
# 设置列宽, 一般加两个字节宽度, 可以根据实际情况灵活调整
ws.column_dimensions[col_name].width = col_widths[i - 1] + 6
# 设置第一行的单元格格式
for i in range(1, ws.max_column + 1):
# 设置第一行的单元格为自动换行, 水平居中, 垂直居中
ws.cell(1, i).alignment = openpyxl.styles.Alignment(horizontal='center', vertical='center', wrap_text=True)
# 设置第一行的单元格字体为微软雅黑, 加粗
ws.cell(1, i).font = font
# 设置第一行的单元格填充颜色为深橙色FF8C00
ws.cell(1, i).fill = fill
wb.save(output_path)
print('第{}/{}个xlsx文件处理完毕!'.format(count, len(file_lists)))
######################################################################
######################################################################
# 画Map
print('开始输出第{}/{}个xlsx文件的Map...'.format(count, len(file_lists)))
List_Isb_sel = []
List_FBC_sel = []
# 获取当前系统时间, 格式为年_月_日_时_分_秒, 把系统时间添加到文件夹的命名中, 以避免文件夹重复且方便归档记录
Nowtime = dt.datetime.now().strftime('%Y_%m_%d_%H_%M_%S')
# 创建文件夹, 使每片wafer的数据都单独有一个文件夹存放
local_path = path_pardir + '/Output/' + str(Lot_ID) + path_str + str(Wafer_ID) + '_' + Nowtime
os.makedirs(local_path)
Die_X = df_concat['die_x'].tolist()
Die_Y = df_concat['die_y'].tolist()
Bin = df_concat['SBIN_NUM'].tolist()
# 获取df_concat的列标签
col_label = df_concat.columns.values.tolist()
# print(col_label)
# print(type(col_label))
for s in col_label:
if re.match(r'.*Istandby.*', s, re.I):
List_Isb_sel.append(s)
elif re.match(r'.*((Scan)|(M6N)|(Data_Retention)).*', s, re.I):
List_FBC_sel.append(s)
for i in range(len(Bin)):
Bin_draw(Die_X, Die_Y, Bin, Lot_ID, Wafer_ID, local_path)
for i in range(len(List_Isb_sel)):
List_Isb_item = List_Isb_sel[i]
List_Isb_temp = df_concat[List_Isb_sel[i]].tolist()
ISB_draw(Die_X, Die_Y, List_Isb_temp, Lot_ID, Wafer_ID, List_Isb_item, local_path)
for i in range(len(List_FBC_sel)):
List_FBC_item = List_FBC_sel[i]
List_FBC_temp = df_concat[List_FBC_sel[i]].tolist()
# print(List_FBC_temp)
FBC_draw(Die_X, Die_Y, List_FBC_temp, Lot_ID, Wafer_ID, List_FBC_item, local_path)
print('第{}/{}个xlsx文件的Map输出完毕!'.format(count, len(file_lists)))
######################################################################
######################################################################
count += 1
print('程序运行完毕!')
print('=' * 30)
10.完整脚本如下
代码如下：
import numpy as np
import pandas as pd
import matplotlib.patches as patches
import matplotlib.pyplot as plt
import datetime as dt
import openpyxl
from openpyxl.utils import get_column_letter
import re
import os
import glob
import warnings
warnings.filterwarnings('ignore')
pd.options.display.max_columns = None
global df_concat
# 获取当前脚本文件所在目录
path_current = os.getcwd()
# 获取当前脚本文件所在目录的上一级目录
path_pardir = os.path.dirname(path_current)
print('$$$path_pardir:', path_pardir)
file_lists = glob.glob(path_pardir + '/Output/*.xlsx')
print('$$$file_lists:', file_lists)
# 先定义好需要提取的有效信息的列名
column_common = ['lot_id', 'wf_id', 'die_x', 'die_y', 'SBIN_NUM']
# column_private = ['Istandby:VDD[1]', 'Istandby:VDDI[1]', 'Istandby:VDD_SRAM[1]', 'Istandby:VDDIO[1]',
# 'Scan_HV', 'Scan_MV', 'Scan_LV', 'M6N_HV', 'M6N_MV', 'M6N_LV', 'Data_Retention_0', 'Data_Retention_1']
abnormal_character_set = ['/', '\\', ':', '*', '"', '<', '>', '|', '?']
def cycle_picture():
fig = plt.figure(figsize=(8, 8), dpi=100)
ax = fig.add_subplot(111)
theta = np.arange(0, 2 * np.pi, 0.01)
x = 5 + 5.5 * np.cos(theta)
y = 4 + 4.5 * np.sin(theta)
# plt.vlines(np.arange(-0.5, 11, 1), -0.5, 8.5, linestyles='--')
# plt.hlines(np.arange(-0.5, 9, 1), -0.5, 10.5)
plt.plot(x, y, color='Black')
ax.xaxis.set_ticks_position('top')
plt.xticks(np.arange(-1, 12, 1))
plt.yticks(np.arange(-1, 9, 1))
ax.invert_yaxis()
# plt.show()
return ax
def FBC_draw(die_X, die_Y, list_FBC_temp, lot, wafer, list_FBC_item, local_Path):
color_dict = {'1': '#00FF00', '2': '#32CD32', '3': '#90EE90', '4': '#F0E68C', '5': '#FFFF00', '6': '#FFA500',
'7': '#FF8C00', '8': '#FF7F50', '9': '#FF4500', '10': '#FF6347', '11': '#CD5C5C', '12': 'FF0000',
'13': '#8B0000'}
ax = cycle_picture()
for X, Y, FBC_v in zip(die_X, die_Y, list_FBC_temp):
# 以下if结构中用FBC_v的大小来衡量每个die该赋的颜色, 文字, 以及文字大致居中时所需的X轴的坐标偏移量
if FBC_v >= 268435456:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '12'
pv = str(temp_pv) + 'M'
shift_v = 0.4
elif 67108864 <= FBC_v < 268435456:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '12'
pv = str(temp_pv) + 'M'
shift_v = 0.4
elif 8388608 <= FBC_v < 67108864:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '9'
pv = str(temp_pv) + 'M'
shift_v = 0.4
elif 2097152 <= FBC_v < 8388608:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '9'
pv = str(temp_pv) + 'M'
shift_v = 0.3
elif 1048576 <= FBC_v < 2097152:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '5'
pv = str(temp_pv) + 'M'
shift_v = 0.2
elif 524288 <= FBC_v < 1048576:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '5'
pv = str(temp_pv) + 'M'
shift_v = 0.2
elif 104858 <= FBC_v < 524288:
temp_pv = round(FBC_v / 1024 / 1024, 1)
color = '4'
pv = str(temp_pv) + 'M'
shift_v = 0.2
elif 1000 <= FBC_v < 104858:
temp_pv = round(FBC_v / 1024, 1)
color = '4'
pv = str(temp_pv) + 'K'
shift_v = 0.4
elif 100 <= FBC_v < 1000:
pv = FBC_v
color = '4'
shift_v = 0.3
elif 50 <= FBC_v < 100:
pv = FBC_v
color = '3'
shift_v = 0.2
elif 10 <= FBC_v < 50:
pv = FBC_v
color = '3'
shift_v = 0.2
elif 0 < FBC_v < 10:
pv = FBC_v
color = '3'
shift_v = 0.1
elif FBC_v == 0:
pv = FBC_v
color = '1'
shift_v = 0.1
else:
pv = FBC_v
color = '12'
shift_v = 0.1
# 画出对应的die的形状Rectangle, 透明度alpha, 表面填充颜色, 边缘线条颜色, 线宽
ax.add_patch(patches.Rectangle([X - 0.5, Y - 0.5], 1, 1, alpha=0.8, facecolor=color_dict[color], edgecolor='k', linewidth=2))
# 画出每个die上的文字, 即需要显示的Fail bit count的大小
plt.text(X - shift_v, Y + 0.08, pv, fontsize=12)
for abnormal_character in abnormal_character_set:
list_FBC_item = str(list_FBC_item).replace(abnormal_character, ' ')
# 画出每片Wafer的标题
plt.text(1, -0.77, str(lot) + '_W' + str(wafer) + '_' + str(list_FBC_item) + '_FBC_Map', size=14)
# 调整subplot的参数
plt.subplots_adjust(top=0.95, bottom=0, left=0, right=1, hspace=0, wspace=0)
# 保存画好的FBC_Map图, bbox_inches='tight'以紧凑型保存, 并格式化命名
plt.savefig(local_Path + '/' + str(lot) + '_W' + str(wafer) + '_' + str(list_FBC_item) + '_FBC_Map.jpg', bbox_inches='tight')
# ion函数开始matplotlib的交互模式, 即遇到plt.show()函数时会继续执行
# plt.ion()
# plt.show()
plt.close()
def ISB_draw(die_X, die_Y, list_Isb_temp, lot, wafer, list_Isb_item, local_Path):
color_dict = {'1': '#00FF00', '2': '#32CD32', '3': '#90EE90', '4': '#F0E68C', '5': '#FFFF00', '6': '#FFA500',
'7': '#FF8C00', '8': '#FF7F50', '9': '#FF4500', '10': '#FF6347', '11': '#CD5C5C', '12': 'FF0000',
'13': '#8B0000'}
ax = cycle_picture()
for X, Y, ISB_v in zip(die_X, die_Y, list_Isb_temp):
pv = abs(float(ISB_v))
if 200 <= pv < 999999:
# pv = str(round(pv / 1000, 2)) + 'K' if pv >= 1000 else round(pv, 1)
# pv = round(pv, 1)
pv = round(pv, 2)
para_v = '4'
shift_v = 0.4
elif 150 <= pv < 200:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.4
elif 100 <= pv < 150:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.4
elif 80 <= pv < 100:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.3
elif 50 <= pv < 80:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.25
elif 30 <= pv < 50:
pv = round(pv, 2)
para_v = '4'
shift_v = 0.3
elif 10 <= pv < 30:
pv = round(pv, 2)
para_v = '3'
shift_v = 0.3
elif 0 <= pv < 10:
pv = round(pv, 2)
para_v = '1'
shift_v = 0.2
else:
pv = round(pv, 2)
para_v = '13'
shift_v = 0.2
ax.add_patch(patches.Rectangle([X - 0.5, Y - 0.5], 1, 1, alpha=0.8, facecolor=color_dict[para_v], edgecolor='k',
linewidth=2))
# 画出每个die上的文字, 即需要显示的Fail bit count的大小
plt.text(X - shift_v, Y + 0.08, pv, fontsize=10)
for abnormal_character in abnormal_character_set:
list_Isb_item = str(list_Isb_item).replace(abnormal_character, ' ')
plt.text(1, -0.77, str(lot) + '_W' + str(wafer) + '_' + str(list_Isb_item) + '_Map', size=14)
plt.subplots_adjust(top=0.95, bottom=0, left=0, right=1, hspace=0, wspace=0)
plt.savefig(local_Path + '/' + str(lot) + '_W' + str(wafer) + '_' + str(list_Isb_item) + '_Map.jpg', bbox_inches='tight')
# plt.ion()
# plt.pause()
# plt.show()
plt.close()
def Bin_draw(die_X, die_Y, bin, lot, wafer, local_Path):
ax = cycle_picture()
color_dict = {1: '#00FF00', 2: '#FF0000', 4: '#800000', 7: '#FFA500', 8: '#FF4500', 9: '#FFFF00',
10: '#7B68EE', 11: '#800080', 12: '#008080', 13: '#F08080', 14: '#BC8F8F', 15: '#CD5C5C',
16: '#87CEFA', 17: '#D4F2E7', 30: '#DA70D6', 31: '#9932CC', 32: '#0000FF', 36: '#FF00FF',
40: '#00FFFF', 44: '#1E90FF', 48: '#FF69B4', 49: '#FF6347', 66: '#FF69B4'}
for X, Y, bin_v in zip(die_X, die_Y, bin):
# 若First Fail Bin 不在color_dict的键值中, 则一律将其颜色赋值为color_dict中键值42的颜色值
if bin_v in color_dict.keys():
bin_v_index = bin_v
else:
bin_v_index = 66
ax.add_patch(patches.Rectangle([X - 0.5, Y - 0.5], 1, 1, alpha=0.8, facecolor=color_dict[bin_v_index], edgecolor='k', linewidth=2))
shift_v = 0.08 if len(str(bin_v)) == 1 else 0.2
plt.text(X - shift_v, Y + 0.08, bin_v, fontsize=18)
# 画图例
legend = [[1, 2, 4, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 30, 31, 32, 36, 40, 44, 48, 49, 66]]
colcolor = ['#00FF00', '#FF0000', '#800000', '#FFA500', '#FF4500', '#FFFF00', '#7B68EE', '#800080', '#008080',
'#F08080', '#BC8F8F', '#CD5C5C', '#87CEFA', '#D4F2E7', '#DA70D6', '#9932CC', '#0000FF', '#FF00FF',
'#00FFFF', '#1E90EF', '#FF69B4', '#FF6347', '#FF69B4']
plt.table(loc='bottom', cellText=legend, cellLoc='center', colColours=colcolor, rowLabels=['Bin'])
# 画标题
plt.text(3.5, -0.77, str(lot) + '_W' + str(wafer) + '_Bin_Map', size=14)
plt.subplots_adjust(top=0.95, bottom=0, left=0, right=1, hspace=0, wspace=0)
plt.savefig(local_Path + '/' + str(lot) + '_W' + str(wafer) + '_Bin_Map.jpg', bbox_inches='tight')
# plt.ion()
# plt.show()
# plt.pause()
plt.close()
if __name__ == '__main__':
print('程序正在运行, 请稍等...')
count = 1
for file in file_lists:
print('=' * 30)
print('正在处理第{}/{}个xlsx文件...'.format(count, len(file_lists)))
######################################################################
######################################################################
# 清洗.xlsx数据
df_dict = pd.read_excel(file, sheet_name=None)
sheet_name_list = list(df_dict)
# print('$$$sheet_name_list:', sheet_name_list)
sheet_name_sel_list = []
for sheet_name in sheet_name_list:
if re.match(r'.*STDF.*', sheet_name, re.I):
sheet_name_sel = re.match(r'.*STDF.*', sheet_name, re.I)
sheet_name_sel_list.append(sheet_name_sel.group())
# print('$$$sheet_name_sel_list:', sheet_name_sel_list)
######################################################################
# 先提取共通的信息['lot_id', 'wf_id', 'die_x', 'die_y', 'SBIN_NUM']
df_common_sel = df_dict[sheet_name_sel_list[0]]
df_common = df_common_sel[column_common]
# print('$$$df_common:', df_common)
######################################################################
# 再提取非共通的信息['Istandby:VDD[1]', 'Istandby:VDDI[1]', 'Istandby:VDD_SRAM[1]', 'Istandby:VDDIO[1]',
# 'Scan_HV', 'Scan_MV', 'Scan_LV', 'M6N_HV', 'M6N_MV', 'M6N_LV', 'Data_Retention_0', 'Data_Retention_1']
column_private_dict = {}
for sheet_name_var in sheet_name_sel_list:
df_private_sel = df_dict[sheet_name_var]
column_list = list(df_private_sel)
for cols in column_list:
if re.match(r'.*Istandby:VDD\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Istandby:VDDI\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Istandby:VDD_SRAM\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Istandby:VDDIO\[1]', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Scan_HV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Scan_MV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Scan_LV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*M6N_HV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*M6N_MV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*M6N_LV.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Data_Retention_0.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
elif re.match(r'.*Data_Retention_1.*', cols, re.I):
column_private_dict.setdefault(sheet_name_var, []).append(cols)
# print('$$$column_private_dict:', column_private_dict)
num = 1
for key in list(column_private_dict):
df_tmp = df_dict[key][column_private_dict[key]]
if num == 1:
df_concat = pd.concat([df_common, df_tmp], axis=1)
else:
df_concat = pd.concat([df_concat, df_tmp], axis=1)
num += 1
# print('$$$df_concat:', df_concat)
# print('$$$list(df_concat):', list(df_concat))
Lot_ID = df_concat['lot_id'][0]
Wafer_ID = df_concat['wf_id'][0]
# VDDIO = df_concat['0:Istandby:VDDIO[1]']
# print('$$$VDDIO:', VDDIO)
df_concat.set_index('lot_id', inplace=True)
path_str = ''
if len(str(Wafer_ID)) == 1:
path_str = '_W0'
elif len(str(Wafer_ID)) == 2:
path_str = '_W'
output_path = path_pardir + '/Output/' + str(Lot_ID) + path_str + str(Wafer_ID) + '.xlsx'
df_concat.to_excel(output_path)
######################################################################
######################################################################
# 设置清洗后的表格的内部格式
wb = openpyxl.load_workbook(output_path)
ws = wb.active
# 冻结窗口
ws.freeze_panes = 'F2'
# 字体微软雅黑, 加粗
font = openpyxl.styles.Font('微软雅黑', bold=True)
# 填充色为深橙色FF8C00
fill = openpyxl.styles.PatternFill(fill_type='solid', start_color='FF8C00')
# 计算每列最大宽度, 并存储在列表col_widths中
col_widths = []
for i in range(1, ws.max_column + 1):
# 定义初始列宽col_width, 并在每个行循环完成后重置
col_width = 1
# 从第二行开始, 因为第一行为列标签, 即不计算第一行的列标签的宽度, 后面让其自动换行即可
for j in range(2, ws.max_row + 1):
cell_value = ws.cell(row=j, column=i).value
# 中文占用多个字节, 需要分开处理
if isinstance(cell_value, str):
# gbk解码一个中文两字节, utf-8一个中文三字节, gbk合适
col_width_real = len(cell_value.encode('gbk'))
else:
col_width_real = len(str(cell_value))
if col_width < col_width_real:
col_width = col_width_real
col_widths.append(col_width)
# 设置列宽
for i in range(1, ws.max_column + 1):
# 将数字转化为列名, 26个字母以内也可以用[chr(i).upper() for i in range(97, 123)], 不用导入模块
col_name = get_column_letter(i)
# 设置列宽, 一般加两个字节宽度, 可以根据实际情况灵活调整
ws.column_dimensions[col_name].width = col_widths[i - 1] + 6
# 设置第一行的单元格格式
for i in range(1, ws.max_column + 1):
# 设置第一行的单元格为自动换行, 水平居中, 垂直居中
ws.cell(1, i).alignment = openpyxl.styles.Alignment(horizontal='center', vertical='center', wrap_text=True)
# 设置第一行的单元格字体为微软雅黑, 加粗
ws.cell(1, i).font = font
# 设置第一行的单元格填充颜色为深橙色FF8C00
ws.cell(1, i).fill = fill
wb.save(output_path)
print('第{}/{}个xlsx文件处理完毕!'.format(count, len(file_lists)))
######################################################################
######################################################################
# 画Map
print('开始输出第{}/{}个xlsx文件的Map...'.format(count, len(file_lists)))
List_Isb_sel = []
List_FBC_sel = []
# 获取当前系统时间, 格式为年_月_日_时_分_秒, 把系统时间添加到文件夹的命名中, 以避免文件夹重复且方便归档记录
Nowtime = dt.datetime.now().strftime('%Y_%m_%d_%H_%M_%S')
# 创建文件夹, 使每片wafer的数据都单独有一个文件夹存放
local_path = path_pardir + '/Output/' + str(Lot_ID) + path_str + str(Wafer_ID) + '_' + Nowtime
os.makedirs(local_path)
Die_X = df_concat['die_x'].tolist()
Die_Y = df_concat['die_y'].tolist()
Bin = df_concat['SBIN_NUM'].tolist()
# 获取df_concat的列标签
col_label = df_concat.columns.values.tolist()
# print(col_label)
# print(type(col_label))
for s in col_label:
if re.match(r'.*Istandby.*', s, re.I):
List_Isb_sel.append(s)
elif re.match(r'.*((Scan)|(M6N)|(Data_Retention)).*', s, re.I):
List_FBC_sel.append(s)
for i in range(len(Bin)):
Bin_draw(Die_X, Die_Y, Bin, Lot_ID, Wafer_ID, local_path)
for i in range(len(List_Isb_sel)):
List_Isb_item = List_Isb_sel[i]
List_Isb_temp = df_concat[List_Isb_sel[i]].tolist()
ISB_draw(Die_X, Die_Y, List_Isb_temp, Lot_ID, Wafer_ID, List_Isb_item, local_path)
for i in range(len(List_FBC_sel)):
List_FBC_item = List_FBC_sel[i]
List_FBC_temp = df_concat[List_FBC_sel[i]].tolist()
# print(List_FBC_temp)
FBC_draw(Die_X, Die_Y, List_FBC_temp, Lot_ID, Wafer_ID, List_FBC_item, local_path)
print('第{}/{}个xlsx文件的Map输出完毕!'.format(count, len(file_lists)))
######################################################################
######################################################################
count += 1
print('程序运行完毕!')
print('=' * 30)
四、需要注意的点
1.由于文件夹名或者文件名中不能有以下九种字符，所以在保存图片之前需要对文件名中的这些字符进行过滤剔除
代码如下：
for abnormal_character in abnormal_character_set:
list_FBC_item = str(list_FBC_item).replace(abnormal_character, ' ')
for abnormal_character in abnormal_character_set:
list_Isb_item = str(list_Isb_item).replace(abnormal_character, ' ')
2.由于我们直接利用pandas输出到excel文件中时，表格是没有任何格式设置的，如果我们希望看到格式比较规整的excel表格，就需要用下面这段代码进行格式设置（主要利用openpyxl进行格式化设置）
代码如下：
######################################################################
######################################################################
# 设置清洗后的表格的内部格式
wb = openpyxl.load_workbook(output_path)
ws = wb.active
# 冻结窗口
ws.freeze_panes = 'F2'
# 字体微软雅黑, 加粗
font = openpyxl.styles.Font('微软雅黑', bold=True)
# 填充色为深橙色FF8C00
fill = openpyxl.styles.PatternFill(fill_type='solid', start_color='FF8C00')
# 计算每列最大宽度, 并存储在列表col_widths中
col_widths = []
for i in range(1, ws.max_column + 1):
# 定义初始列宽col_width, 并在每个行循环完成后重置
col_width = 1
# 从第二行开始, 因为第一行为列标签, 即不计算第一行的列标签的宽度, 后面让其自动换行即可
for j in range(2, ws.max_row + 1):
cell_value = ws.cell(row=j, column=i).value
# 中文占用多个字节, 需要分开处理
if isinstance(cell_value, str):
# gbk解码一个中文两字节, utf-8一个中文三字节, gbk合适
col_width_real = len(cell_value.encode('gbk'))
else:
col_width_real = len(str(cell_value))
if col_width < col_width_real:
col_width = col_width_real
col_widths.append(col_width)
# 设置列宽
for i in range(1, ws.max_column + 1):
# 将数字转化为列名, 26个字母以内也可以用[chr(i).upper() for i in range(97, 123)], 不用导入模块
col_name = get_column_letter(i)
# 设置列宽, 一般加两个字节宽度, 可以根据实际情况灵活调整
ws.column_dimensions[col_name].width = col_widths[i - 1] + 6
# 设置第一行的单元格格式
for i in range(1, ws.max_column + 1):
# 设置第一行的单元格为自动换行, 水平居中, 垂直居中
ws.cell(1, i).alignment = openpyxl.styles.Alignment(horizontal='center', vertical='center', wrap_text=True)
# 设置第一行的单元格字体为微软雅黑, 加粗
ws.cell(1, i).font = font
# 设置第一行的单元格填充颜色为深橙色FF8C00
ws.cell(1, i).fill = fill
wb.save(output_path)
print('第{}/{}个xlsx文件处理完毕!'.format(count, len(file_lists)))
######################################################################
######################################################################
3.获取系统当前时间，把时间字符串添加到文件夹的命名中，这样可以避免多次运行程序导致文件夹重复，覆盖原有文件夹的问题
代码如下：
# 获取当前系统时间, 格式为年_月_日_时_分_秒, 把系统时间添加到文件夹的命名中, 以避免文件夹重复且方便归档记录
Nowtime = dt.datetime.now().strftime('%Y_%m_%d_%H_%M_%S')
# 创建文件夹, 使每片wafer的数据都单独有一个文件夹存放
local_path = path_pardir + '/Output/' + str(Lot_ID) + path_str + str(Wafer_ID) + '_' + Nowtime
os.makedirs(local_path)
五、总结
本文所要讲的内容就这些，主要讲了如何利用正则表达式re模块和pandas模块清洗数据混乱的表格.xlsx文件；然后讲了如何利用openpyxl对清洗后的表格进行单元格格式化设置，接着讲了如何利用matplotlib模块对清洗后的表格进行数据可视化分析。希望对大家学习数据清洗、数据分析有帮助。
591
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
