1 简介
Hi,大家好,这里是丹成学长,今天向大家介绍一个学长做的单片机项目
基于单片机的家庭智能监控系统
大家可用于 课程设计 或 毕业设计
🧿 毕设项目分享:见文末!
2 主要器件
- 红外传感器-7m
- ESP32-CAM
- USB到TTL串行转换器5V
- 主控MCU(可选)
2.1 ESP32-CAM 模块
模块包含一块ESP32-CAM的MCU和一个OV2640的200W像素摄像头,ESP32-CAM除了支持OV2640外还支持OV7670摄像头,不过7670只有30W像素
2.2 红外热释电传感器
3 实现效果
当是房间内有人出现,摄像头自动打开,通过手机或者电脑浏览就可以访问摄像头
4 部分实现代码
部分关键代码:
/*
albino98
https://github.com/albino98/telegram_esp32.git
*/
#ifdef ESP32
#include <WiFi.h>
#else
#include <ESP8266WiFi.h>
#endif
#include <WiFiClientSecure.h>
#include <UniversalTelegramBot.h> // Universal Telegram Bot Library written by Brian Lough: https://github.com/witnessmenow/Universal-Arduino-Telegram-Bot
#include <ArduinoJson.h>
#include "esp_camera.h"
#include "soc/soc.h"
#include "soc/rtc_cntl_reg.h"
#include "driver/rtc_io.h"
// Replace with your network credentials
const char* ssid = "NetworkName";
const char* password = "NetworkPW";
const int motionSensor = 13;
int armed = 1;
#define BOTtoken "xxxxxxx:xxxxxxxxxxxxxxxxxx" // your Bot Token (Get from Botfather)
// Use @myidbot to find out the chat ID of an individual or a group
#define CHAT_ID "xxxxxxx"
//Pin definition for CAMERA_MODEL_AI_THINKER
#define PWDN_GPIO_NUM 32
#define RESET_GPIO_NUM -1
#define XCLK_GPIO_NUM 0
#define SIOD_GPIO_NUM 26
#define SIOC_GPIO_NUM 27
#define Y9_GPIO_NUM 35
#define Y8_GPIO_NUM 34
#define Y7_GPIO_NUM 39
#define Y6_GPIO_NUM 36
#define Y5_GPIO_NUM 21
#define Y4_GPIO_NUM 19
#define Y3_GPIO_NUM 18
#define Y2_GPIO_NUM 5
#define VSYNC_GPIO_NUM 25
#define HREF_GPIO_NUM 23
#define PCLK_GPIO_NUM 22
WiFiClientSecure client;
UniversalTelegramBot bot(BOTtoken, client);
// Checks for new messages every 1 second.
int botRequestDelay = 1000;
unsigned long lastTimeBotRan;
const int ledPin = 4;
bool ledState = LOW;
camera_fb_t * fb;
uint8_t* fb_buffer;
size_t fb_length;
int currentByte;
boolean startTimer = false;
// Handle what happens when you receive new messages
void handleNewMessages(int numNewMessages) {
Serial.println("handleNewMessages");
Serial.println(String(numNewMessages));
for (int i=0; i<numNewMessages; i++) {
// Chat id of the requester
String chat_id = String(bot.messages[i].chat_id);
if (chat_id != CHAT_ID){
bot.sendMessage(chat_id, "Unauthorized user", "");
continue;
}
// Print the received message
String text = bot.messages[i].text;
Serial.println(text);
String from_name = bot.messages[i].from_name;
if (text == "/start") {
String welcome = "Welcome, " + from_name + ".\n";
welcome += "Use the following commands to control your outputs.\n\n";
welcome += "/take_photo to take a picture \n";
welcome += "/arm to arm the security system \n";
welcome += "/disarm to disarm the security system \n";
welcome += "/led_on to turn GPIO ON \n";
welcome += "/led_off to turn GPIO OFF \n";
welcome += "/state to request current GPIO state and security system state \n";
bot.sendMessage(chat_id, welcome, "");
}
if (text == "/led_on") {
bot.sendMessage(chat_id, "LED state set to ON", "");
ledState = HIGH;
digitalWrite(ledPin, ledState);
}
if (text == "/led_off") {
bot.sendMessage(chat_id, "LED state set to OFF", "");
ledState = LOW;
digitalWrite(ledPin, ledState);
}
if (text == "/take_photo") {
take_send_photo(CHAT_ID);
}
if (text == "/security_on") {
armed = 1;
bot.sendMessage(chat_id, "Security System is ON", "");
}
if (text == "/security_off") {
armed = 0;
bot.sendMessage(chat_id, "Security System is OFF", "");
}
if (text == "/state") {
if (digitalRead(ledPin)){
bot.sendMessage(chat_id, "LED is ON", "");
}
else{
bot.sendMessage(chat_id, "LED is OFF", "");
}
if(armed == 1){
bot.sendMessage(chat_id, "The security system is ON", "");
}
else {
bot.sendMessage(chat_id, "The security system is OFF", "");
}
}
}
}
bool isMoreDataAvailable() {
return (fb_length - currentByte);
}
uint8_t photoNextByte() {
currentByte++;
return (fb_buffer[currentByte - 1]);
}
void take_send_photo(String chat_id)
{
camera_fb_t * fb = NULL;
fb = esp_camera_fb_get();
currentByte = 0;
fb_length = fb->len;
fb_buffer = fb->buf;
bot.sendPhotoByBinary(chat_id, "image/jpeg", fb->len, isMoreDataAvailable, photoNextByte, nullptr, nullptr);
esp_camera_fb_return(fb);
fb_length = NULL;
fb_buffer = NULL;
}
void setup() {
armed = 1;
WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG,0);//disable brownout detector
Serial.begin(115200);
camera_config_t configg;
configg.ledc_channel = LEDC_CHANNEL_0;
configg.ledc_timer = LEDC_TIMER_0;
configg.pin_d0 = Y2_GPIO_NUM;
configg.pin_d1 = Y3_GPIO_NUM;
configg.pin_d2 = Y4_GPIO_NUM;
configg.pin_d3 = Y5_GPIO_NUM;
configg.pin_d4 = Y6_GPIO_NUM;
configg.pin_d5 = Y7_GPIO_NUM;
configg.pin_d6 = Y8_GPIO_NUM;
configg.pin_d7 = Y9_GPIO_NUM;
configg.pin_xclk = XCLK_GPIO_NUM;
configg.pin_pclk = PCLK_GPIO_NUM;
configg.pin_vsync = VSYNC_GPIO_NUM;
configg.pin_href = HREF_GPIO_NUM;
configg.pin_sscb_sda = SIOD_GPIO_NUM;
configg.pin_sscb_scl = SIOC_GPIO_NUM;
configg.pin_pwdn = PWDN_GPIO_NUM;
configg.pin_reset = RESET_GPIO_NUM;
configg.xclk_freq_hz = 20000000;
configg.pixel_format = PIXFORMAT_JPEG;
pinMode(ledPin, OUTPUT);
digitalWrite(ledPin, ledState);
rtc_gpio_hold_dis(GPIO_NUM_4);
pinMode(GPIO_NUM_13, INPUT_PULLUP);
if(psramFound()){
configg.frame_size = FRAMESIZE_UXGA;
configg.jpeg_quality = 10;
configg.fb_count = 2;
}else{
configg.frame_size = FRAMESIZE_SVGA;
configg.jpeg_quality = 12;
configg.fb_count = 1;
}
//Init Camera
esp_err_t err = esp_camera_init(&configg);
if(err != ESP_OK){
Serial.printf("Camera init failed with error");
return;
}
// Connect to Wi-Fi
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi..");
}
// Print ESP32 Local IP Address
Serial.println(WiFi.localIP());
}
void loop() {
if(armed == 1){
int isDetected = digitalRead(13);
if(isDetected == 1){
Serial.println("Presence detected");
take_send_photo(CHAT_ID);
delay(3000);
}
}
//delay(1000);
//if (millis() > lastTimeBotRan + botRequestDelay) {
int numNewMessages = bot.getUpdates(bot.last_message_received + 1);
while(numNewMessages) {
Serial.println("got response");
handleNewMessages(numNewMessages);
numNewMessages = bot.getUpdates(bot.last_message_received + 1);
}
delay(1000);
lastTimeBotRan = millis();
// }
}
🧿 毕设项目分享:见文末!
5 最后
**项目分享: ** https://blog.csdn.net/m0_984093