宿舍门禁读卡器

#include <RFID.h>
#include <SPI.h>
#include <Servo.h>

String RC;
RFID rfid(10,5);
unsigned char RC_size;
unsigned char blockAddr; //选择操作的块地址0～63
unsigned char i,tmp;
unsigned char status;
unsigned char str[MAX_LEN];
Servo servo_2;
char * card[]={“f08ca4a3c”,“30cfb4384”};

String RFID_readcardnum() {

rfid.readCardSerial();
String stringserNum=String(rfid.serNum[0], HEX)+String(rfid.serNum[1], HEX)+String(rfid.serNum[2], HEX)+String(rfid.serNum[3], HEX)+String(rfid.serNum[4], HEX);
//选卡，返回卡容量（锁定卡片，防止多次读写）
rfid.selectTag(rfid.serNum);
return stringserNum;
}

//4字节卡序列号，第5字节为校验字节
//新扇区A密码，16个扇区，每个扇区密码6Byte
unsigned char sectorNewKeyA[16][16] = {
{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},};
unsigned char serNum[5];
//写卡数据
//原扇区A密码，16个扇区，每个扇区密码6Byte
unsigned char sectorKeyA[16][16] = {
{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},};

void setup(){
RC = “”;
Serial.begin(9600);
SPI.begin();
rfid.init();
Serial.begin(9600);
servo_2.attach(2);
}

void loop(){
if ( rfid.isCard() ) {
RC = RFID_readcardnum();
Serial.println(RC);
for (int i = (0); i <= (sizeof(card)/sizeof(card[0])); i = i + (1)) {
if (RC == card[(int)(i - 1)]) {
servo_2.write(90);
delay(1000);
servo_2.write(0);
delay(0);

  }
}

}

}