TI DM3730 BB-xM, Overo and IGEP hardware / software usage and root fs build resources

Beagle Board xM

Hardware

Software

Builds

Galemin's build(my csdn mirror):

with LI-5M03 camera, based on buildroot

My usage of Galemin's release:

On Fedora 18 x86_64, glibc 2.16-24, binutils 2.23.51.0.1-6, GCC 4.7.2-8

1. glibc removes gets after 2.16, need to patch when build m4 etc.

2. valgrind 3.7.0 depends on glibc 2.14, upgrade valgrind to 3.8.0

3. binutils 2.23 have some issues of arm instruction processings, need to down grade.

Gumstix Overo Ironstorm

Hardware

USB-Serial RS232 TTL

How to add a serial console to Overo Thumbo/Pinto

Wiring Gumstix Pinto-TH and Thumbo Boards For Serial Console Access

Using The Gumstix COM

Software

Using the DSP on Gumstix with Yocto 2012/11/8

Gumstix-YoctoProject-Repo

Video encoding using the DSP is working

Streaming video with Gumstix, GStreamer and the DSP, 2012/1/26

Building Gumstix images with Yocto, 2013/1/17

Gumstix Official Guide

Using the Open Embedded Build System for Overo Series

Camera(Caspa Module)

Dev/Caspa

Micro Air Vehicle Cameras

Work continues on the OMAP3 VPU

In the spotlight: Linux! 

Prebuilt Images

Sakoman

Resource Sites

jumpnowtek

Build Instructions

Using the DSP on Gumstix with Yocto from SleepyRobot (my csdn mirror): with TI DSP enable, based on Yocto

Pansenti/meta-pansenti(my csdn mirror): with wifi work till 11/19/2013, based on Yocto

FLOFT's build: with e-CAM56 37x GSTIX support built in, with TI DSP, based on Yocto

IGEP com Module