AMBA Specification (Rev 2.0)简介

一、配置时钟时，经常看到APB、AHB，一直也没仔细关注过，抽空先粗略了解一下。

二、AMBA Specification (Rev 2.0)定义了三个总线，分别是AHB、ASB和APB。
1、AHB：Advanced High-performance Bus。
AHB is a new generation of AMBA bus which is intended to address the requirements of high-performance synthesizable designs. AMBA AHB is a new level of bus which sits above the APB and implements the features required for high-performance, high clock frequency systems including:
• burst transfers
• split transactions
• single cycle bus master handover
• single clock edge operation
• non-tristate implementation
• wider data bus configurations (64/128 bits).

2、ASB：Advanced System Bus。
The Advanced System Bus (ASB) specification defines a high-performance bus that can be used in the design of high performance 16 and 32-bit embedded microcontrollers.
AMBA ASB supports the efficient connection of processors, on-chip memories and off-chip exte