LPC2129

FEATURES:

MCU: LPC2129 16/32 bit ARM7TDMI-S? with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation

standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG

three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current

single power supply: 9VDC required

power supply status LED

power supply filtering capacitor

two channel RS232 interface with two RS232 SUB-D 9 pin connectors

two channel CAN interface with drivers and two SUB-D 9 pin connectors

iButton interface circuit

Frequency input connector

two buttons

two status LEDs

Potentiometer connected to AIN

RESET circuit with exterman control of Philips ISP utility via RS232

RESET button

DBG jumper for JTAG enable

BSL jumper for bootloader enable

JRST jumper for enable/disable external RESET vontrol by RS232

10 Mhz crystal