Spring实例化源码解析之循环依赖CircularReference这章的最后我们提了一个构造函数形成的循环依赖问题，本章就是讲解利用@Lazy注解如何解决构造函数循环依赖和其原理。
准备工作
首先创建两个构造函数循环依赖的类，TestA和TestB，代码如下：
@Service
public class TestA {
public TestA(@Lazy TestB testB) {
this.testB = testB;
}
TestB testB;
public void testA(){
testB.testB();
}
}
@Service
public class TestB {
public TestB(TestA testA) {
this.testA = testA;
}
TestA testA;
public void testB(){
System.out.println("有人掉我了 ^^");
}
}
这样并不会有循环依赖的异常，所以说@Lazy确实可以解决构造函数循环依赖的问题。
@使用@Lazy注解
@Lazy注解since 3.0，
/*
* Copyright 2002-2021 the original author or authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.springframework.context.annotation;
import java.lang.annotation.Documented;
import java.lang.annotation.ElementType;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.lang.annotation.Target;
/**
* Indicates whether a bean is to be lazily initialized.
*
* <p>May be used on any class directly or indirectly annotated with {@link
* org.springframework.stereotype.Component @Component} or on methods annotated with
* {@link Bean @Bean}.
*
* <p>If this annotation is not present on a {@code @Component} or {@code @Bean} definition,
* eager initialization will occur. If present and set to {@code true}, the {@code @Bean} or
* {@code @Component} will not be initialized until referenced by another bean or explicitly
* retrieved from the enclosing {@link org.springframework.beans.factory.BeanFactory
* BeanFactory}. If present and set to {@code false}, the bean will be instantiated on
* startup by bean factories that perform eager initialization of singletons.
*
* <p>If Lazy is present on a {@link Configuration @Configuration} class, this
* indicates that all {@code @Bean} methods within that {@code @Configuration}
* should be lazily initialized. If {@code @Lazy} is present and false on a {@code @Bean}
* method within a {@code @Lazy}-annotated {@code @Configuration} class, this indicates
* overriding the 'default lazy' behavior and that the bean should be eagerly initialized.
*
* <p>In addition to its role for component initialization, this annotation may also be placed
* on injection points marked with {@link org.springframework.beans.factory.annotation.Autowired}
* or {@link javax.inject.Inject}: In that context, it leads to the creation of a
* lazy-resolution proxy for all affected dependencies, as an alternative to using
* {@link org.springframework.beans.factory.ObjectFactory} or {@link javax.inject.Provider}.
* Please note that such a lazy-resolution proxy will always be injected; if the target
* dependency does not exist, you will only be able to find out through an exception on
* invocation. As a consequence, such an injection point results in unintuitive behavior
* for optional dependencies. For a programmatic equivalent, allowing for lazy references
* with more sophistication, consider {@link org.springframework.beans.factory.ObjectProvider}.
*
* @author Chris Beams
* @author Juergen Hoeller
* @since 3.0
* @see Primary
* @see Bean
* @see Configuration
* @see org.springframework.stereotype.Component
*/
@Target({ElementType.TYPE, ElementType.METHOD, ElementType.CONSTRUCTOR, ElementType.PARAMETER, ElementType.FIELD})
@Retention(RetentionPolicy.RUNTIME)
@Documented
public @interface Lazy {
/**
* Whether lazy initialization should occur.
*/
boolean value() default true;
}
这个注释描述了@Lazy注解在Spring框架中的用法和行为。我将其翻译如下：
表示一个bean是否应该被懒初始化。可以用于任何直接或间接被 @Component 注解标记的类，或者用于被 @Bean 注解标记的方法上。
如果在 @Component 或 @Bean 定义上没有使用这个注解，bean 将会被急切初始化。如果使用了该注解并设置为 true，那么被 @Bean 或 @Component 标记的类将不会在被另一个bean引用或者在封装它的BeanFactory中显式获取之前进行初始化。如果使用了该注解并设置为 false，则bean将会在启动时由急切初始化单例的bean工厂中被实例化。
如果 @Lazy 注解放在一个 @Configuration 类上，表示该配置中的所有 @Bean 方法都应该被懒初始化。如果在一个 @Lazy 注解的 @Configuration 类中的 @Bean 方法上使用了 @Lazy 并设置为 false，这表示覆盖了“默认懒初始化”行为，该bean将会被急切初始化。
除了在组件初始化中的作用外，该注解还可以放在标记为 org.springframework.beans.factory.annotation.Autowired 或 javax.inject.Inject 的注入点上：在这个上下文中，它会为所有受影响的依赖关系创建一个懒解析的代理，作为使用 org.springframework.beans.factory.ObjectFactory 或 javax.inject.Provider 的替代方案。请注意，这种懒解析的代理会被始终注入；如果目标依赖不存在，你只能在调用时通过异常找出。因此，这样的注入点对于可选依赖关系来说会导致行为不直观。对于具备更多复杂性的懒引用的编程等价方式，请考虑使用 org.springframework.beans.factory.ObjectProvider。
@Lazy原理
我在TestA的构造函数中使用了@Lazy懒加载TestB，根据经验，TestA必须会去走Bean的创建流程，以往的普通循环依赖问题都是在populateBean期间(属性注入)做的。但是有个问题，如果我使用了@Lazy说明是在调用构造函数的时候懒加载TestB，那么我TestA中注入了个什么对象?在调用的时候怎么找到正确的TestB，因为TestB并没有懒加载。
分析流程
根据普通Bean循环依赖的经验，我判断会在AbstractAutowireCapableBeanFactory#doCreateBean方法中的属性注入完成后，TestA中就会注入TestB对象。所以我在populateBean打了个条件断点。
发现不对劲，因为在populateBean之前，TestA中就有了TestB的代理对象。搞错了，再来。
然后在AbstractAutowireCapableBeanFactory#doCreateBean方法中的第一行开始打断点，发现在createBeanInstance方法执行完之后就创建了TestB的代理对象。
所以基本定位到在调用构造函数创建TestA的时候就把TestB的代理对象创建好了。
源码跟踪
源码查看足迹可以参考下面的类：
AbstractApplicationContext#refresh
AbstractApplicationContext#finishBeanFactoryInitialization
DefaultListableBeanFactory#preInstantiateSingletons
AbstractBeanFactory#getBean
AbstractBeanFactory#doGetBean
DefaultSingletonBeanRegistry#getSingleton
AbstractBeanFactory#lambda
AbstractAutowireCapableBeanFactory#createBean
AbstractAutowireCapableBeanFactory#doCreateBean
AbstractAutowireCapableBeanFactory#createBeanInstance
AbstractAutowireCapableBeanFactory#autowireConstructor
ConstructorResolver#autowireConstructor
ConstructorResolver#createArgumentArray
ConstructorResolver#resolveAutowiredArgument
DefaultListableBeanFactory#resolveDependency
ContextAnnotationAutowireCandidateResolver#getLazyResolutionProxyIfNecessary
ContextAnnotationAutowireCandidateResolver#buildLazyResolutionProxy:83
这里有个小技巧，如果你使用的时IDEA，快捷键double Shift copy上述一行的栈信息可以直接跳转到次方法中
buildLazyResolutionProxy
ContextAnnotationAutowireCandidateResolver#buildLazyResolutionProxy方法是用于创建懒解析(lazy resolution)的代理对象。
protected Object buildLazyResolutionProxy(final DependencyDescriptor descriptor, final @Nullable String beanName) {
BeanFactory beanFactory = getBeanFactory();
Assert.state(beanFactory instanceof DefaultListableBeanFactory,
"BeanFactory needs to be a DefaultListableBeanFactory");
final DefaultListableBeanFactory dlbf = (DefaultListableBeanFactory) beanFactory;
TargetSource ts = new TargetSource() {
@Override
public Class<?> getTargetClass() {
return descriptor.getDependencyType();
}
@Override
public boolean isStatic() {
return false;
}
@Override
public Object getTarget() {
Set<String> autowiredBeanNames = (beanName != null ? new LinkedHashSet<>(1) : null);
Object target = dlbf.doResolveDependency(descriptor, beanName, autowiredBeanNames, null);
if (target == null) {
Class<?> type = getTargetClass();
if (Map.class == type) {
return Collections.emptyMap();
}
else if (List.class == type) {
return Collections.emptyList();
}
else if (Set.class == type || Collection.class == type) {
return Collections.emptySet();
}
throw new NoSuchBeanDefinitionException(descriptor.getResolvableType(),
"Optional dependency not present for lazy injection point");
}
if (autowiredBeanNames != null) {
for (String autowiredBeanName : autowiredBeanNames) {
if (dlbf.containsBean(autowiredBeanName)) {
dlbf.registerDependentBean(autowiredBeanName, beanName);
}
}
}
return target;
}
@Override
public void releaseTarget(Object target) {
}
};
ProxyFactory pf = new ProxyFactory();
pf.setTargetSource(ts);
Class<?> dependencyType = descriptor.getDependencyType();
if (dependencyType.isInterface()) {
pf.addInterface(dependencyType);
}
return pf.getProxy(dlbf.getBeanClassLoader());
}
很明显这里其实就是通过定义TargeSource来创建一个代理对象，然后注入到TestA中，在TestA需要使用注入的TestB时，会执行这个getTarget方法来获取，如果容器里面有TestB就从容器中获取，如果没有就走创建流程。
247
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
