1.下载代码-配置ve support/ion
2.拷贝.bashrc文件并改变相应的路径path(在export),加上相应的编译工具链接,最后运行source .bashrc
3.新建media目录,拉cedarc/cedarx并配置环境变量
1)进入cddarc,运行./bootstrap 新建tmp目录,这里存放相应的生成库缓存文件。
2)/bootstrap 以建立编译环境:在cedarc 下配置:
./configure --host=arm-linux-gnueabi CFLAGS="-DCONF_KERNEL_VERSION_3_10" --prefix=/home/xieliangxx/tmp/a83/libcedarc/
编译工具链发生改变,这里的gnueabi也相应的发生改变。内核也需要修改。
3)/bootstrap 以建立编译环境:在cedarx 下配置:
./configure --host=arm-linux-gnueabi LDFLAGS="-L/home/xieliangxx/tmp/a83/libcedarc/lib/" --prefix=/home/xieliangxx/tmp/
a83/libcedarc/
编译工具链发生改变,这里的gnueabi也相应的发生改变
4)make install:在cedarx下面分别编译如下文件:按照顺序
media/libcedarx/libcore/base/Makefile.am 、 media/libcedarx/libcore/common/Makefile.am
media/libcedarx/libcore/stream/Makefile.am 、media/libcedarx/libcore/parser/Makefile.am
先进入四个相应的目录,然后make,清除编译错误,最后make install
删除相应的HTTP协议的内容以及需要编译的http文件