OCX控件在HTML中调用时提示：【SCRIPT3: 找不到成员。】

写了一个ocx控件，测试OK后，嵌入到HTML中使用，发现死活调取不了方法，很纳闷！

搜索了方法，说只要设置一下IE浏览器的权限即可：启用“对未标记为安全执行脚本的activex控件初始化并执行脚本”。

这个方法不是不行，而是要求每一个用户都去设置这个权限，显然不合适。

于是乎继续研究方法，终于找到了解决方案！

那就是：实现ActiveX组件的IObjectSafety接口，并且返回脚本安全。

具体来说，就是在h和cpp中加入以下代码：

1、OCXTestCtrl.h

	//
	// ActiveX控件安全初始化：实现ISafeObject接口
	//
	//ISafeObject  
	DECLARE_INTERFACE_MAP()  
	BEGIN_INTERFACE_PART(ObjSafe, IObjectSafety)  
		STDMETHOD_(HRESULT, GetInterfaceSafetyOptions) (   
		/* [in] */ REFIID riid,  
		/* [out] */ DWORD __RPC_FAR *pdwSupportedOptions,  
		/* [out] */ DWORD __RPC_FAR *pdwEnabledOptions  
		);  
 
		STDMETHOD_(HRESULT, SetInterfaceSafetyOptions) (   
			/* [in] */ REFIID riid,  
			/* [in] */ DWORD dwOptionSetMask,  
			/* [in] */ DWORD dwEnabledOptions  
			);  
	END_INTERFACE_PART(ObjSafe);  
	//ISafeObject 

2、OCXTestCtrl.cpp

//
// ActiveX控件安全初始化：实现ISafeObject接口
//
// Interface map for IObjectSafety  
BEGIN_INTERFACE_MAP( COCXTestCtrl, COleControl )  
	INTERFACE_PART(COCXTestCtrl, IID_IObjectSafety, ObjSafe)  
END_INTERFACE_MAP()
// IObjectSafety member functions  
// Delegate AddRef, Release, QueryInterface  
ULONG FAR EXPORT COCXTestCtrl::XObjSafe::AddRef()  
{  
	METHOD_PROLOGUE(COCXTestCtrl, ObjSafe)  
		return pThis->ExternalAddRef();  
}  
ULONG FAR EXPORT COCXTestCtrl::XObjSafe::Release()  
{  
	METHOD_PROLOGUE(COCXTestCtrl, ObjSafe)  
		return pThis->ExternalRelease();  
}  
HRESULT FAR EXPORT COCXTestCtrl::XObjSafe::QueryInterface(  
	REFIID iid, void FAR* FAR* ppvObj)  
{  
	METHOD_PROLOGUE(COCXTestCtrl, ObjSafe)  
		return (HRESULT)pThis->ExternalQueryInterface(&iid, ppvObj);  
}  
const DWORD dwSupportedBits =   
	INTERFACESAFE_FOR_UNTRUSTED_CALLER |  
	INTERFACESAFE_FOR_UNTRUSTED_DATA;  
const DWORD dwNotSupportedBits = ~ dwSupportedBits;  
//.............................................................................  
// CStopLiteCtrl::XObjSafe::GetInterfaceSafetyOptions  
// Allows container to query what interfaces are safe for what. We're  
// optimizing significantly by ignoring which interface the caller is  
// asking for.  
HRESULT STDMETHODCALLTYPE   
	COCXTestCtrl::XObjSafe::GetInterfaceSafetyOptions(   
	/* [in] */ REFIID riid,  
	/* [out] */ DWORD __RPC_FAR *pdwSupportedOptions,  
	/* [out] */ DWORD __RPC_FAR *pdwEnabledOptions)  
{  
	METHOD_PROLOGUE(COCXTestCtrl, ObjSafe)  
		HRESULT retval = ResultFromScode(S_OK);  
	// does interface exist?  
	IUnknown FAR* punkInterface;  
	retval = pThis->ExternalQueryInterface(&riid,   
		(void * *)&punkInterface);  
	if (retval != E_NOINTERFACE) { // interface exists  
		punkInterface->Release(); // release it--just checking!  
	}  
 
	// we support both kinds of safety and have always both set,  
	// regardless of interface  
	*pdwSupportedOptions = *pdwEnabledOptions = dwSupportedBits;  
	return retval; // E_NOINTERFACE if QI failed  
}  
/  
// CStopLiteCtrl::XObjSafe::SetInterfaceSafetyOptions  
// Since we're always safe, this is a no-brainer--but we do check to make  
// sure the interface requested exists and that the options we're asked to  
// set exist and are set on (we don't support unsafe mode).  
HRESULT STDMETHODCALLTYPE   
	COCXTestCtrl::XObjSafe::SetInterfaceSafetyOptions(   
	/* [in] */ REFIID riid,  
	/* [in] */ DWORD dwOptionSetMask,  
	/* [in] */ DWORD dwEnabledOptions)  
{  
	METHOD_PROLOGUE(COCXTestCtrl, ObjSafe)  
 
		// does interface exist?  
		IUnknown FAR* punkInterface;  
	pThis->ExternalQueryInterface(&riid, (void * *)&punkInterface);  
	if (punkInterface) { // interface exists  
		punkInterface->Release(); // release it--just checking!  
	}  
	else { // interface doesn't exist  
		return ResultFromScode(E_NOINTERFACE);  
	}  
	// can't set bits we don't support  
	if (dwOptionSetMask & dwNotSupportedBits) {   
		return ResultFromScode(E_FAIL);  
	}  
 
	// can't set bits we do support to zero  
	dwEnabledOptions &= dwSupportedBits;  
	// (we already know there are no extra bits in mask )  
	if ((dwOptionSetMask & dwEnabledOptions) !=  
		dwOptionSetMask) {  
			return ResultFromScode(E_FAIL);  
	}          
 
	// don't need to change anything since we're always safe  
	return ResultFromScode(S_OK);  
}  
//

实例截图：

转载：

OCX控件在HTML中调用时提示：【SCRIPT3: 找不到成员。】_laironggui的博客-CSDN博客_调用ocx控件找不到成员

ActiveX控件安全初始化之一:实现ISafeObject接口_Barry__的博客-CSDN博客