华为配置Eth-Trunk接口流量本地优先转发

1. 创建Eth-Trunk接口
   [Stack]int Eth-Trunk 1
   [Stack-Eth-Trunk1]port link-type trunk
   [Stack-Eth-Trunk1]port trunk allow-pass vlan all
   [LSW3]interface Eth-Trunk 1
   [LSW3-Eth-Trunk1]port link-type trunk
   [LSW3-Eth-Trunk1]port trunk allow-pass vlan all
2. 加入Eth-Trunk的成员接口
   [Stack-GigabitEthernet0/0/1]eth-trunk 1
   [Stack-GigabitEthernet0/0/3]eth-trunk 1
   [LSW3]interface Eth-Trunk 1
   [LSW3-Eth-Trunk1]trunkport GigabitEthernet 0/0/1 to 0/0/2
3. 使能Eth-Trunk接口流量本地优先转发功能
   [Stack-Eth-Trunk1]local-preference enable
4. 配置各接口加入相应VLAN，实现二层互通
   [Stack-GigabitEthernet0/0/4]port link-type trunk
   [Stack-GigabitEthernet0/0/4]port trunk allow-pass vlan 10
   [Stack-GigabitEthernet0/0/5]port link-type trunk
   [Stack-GigabitEthernet0/0/5]port trunk allow-pass vlan 20
   [LSW4-GigabitEthernet0/0/1]port link-type trunk
   [LSW4-GigabitEthernet0/0/1]port trunk allow-pass vlan 10
   [LSW4-GigabitEthernet0/0/2]port link-type access
   [LSW4-GigabitEthernet0/0/2]port default vlan 10
   [LSW5]vlan 20
   [LSW5-GigabitEthernet0/0/5]port link-type trunk
   [LSW5-GigabitEthernet0/0/5]port trunk allow-pass vlan 20
   [LSW5-GigabitEthernet0/0/1]port link-type access
   [LSW5-GigabitEthernet0/0/1]port default vlan 20
   5.验证
   [Stack]display trunkmembership eth-trunk 1