华为设备配置通过VLANIF实现同VLAN不同网段通信

1. 配置VLAN并将各接口加入VLAN
   [LSW1]vlan batch 10 20
   [LSW1-GigabitEthernet0/0/1]port link-type access
   [LSW1-GigabitEthernet0/0/1]port default vlan 10
   [LSW1-GigabitEthernet0/0/2]port link-type access
   [LSW1-GigabitEthernet0/0/2]port default vlan 10
   [LSW1-GigabitEthernet0/0/3]port link-type trunk
   [LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 10 20
   [LSW1-GigabitEthernet0/0/3]port trunk pvid vlan 20
2. 配置VLANIF接口
   [LSW1-Vlanif10]ip add 10.1.1.10 24
   [LSW1-Vlanif10]ip add 10.1.2.10 24 sub
   [LSW1-Vlanif20]ip add 10.1.20.2 24
3. 配置上行路由
   [LSW1]ospf 1
   [LSW1-ospf-1]area 0
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.2.0 0.0.0.255
   [LSW1-ospf-1-area-0.0.0.0]network 10.1.20.0 0.0.0.255
   4.配置AR1
   [AR1-GigabitEthernet0/0/0]ip add 10.1.20.1 24
   [AR1]ospf 1
   [AR1-ospf-1]area 0
   [AR1-ospf-1-area-0.0.0.0]network 10.1.20.0 0.0.0.255
   5.配置PC
   
   

6.验证配置