华为设备配置SEP封闭环

1. 配置SEP基本功能
   （1）配置Segment ID为1的SEP段和VLAN ID为10控制VLAN
   [LSW1]sep segment 1
   [LSW1-sep-segment1]control-vlan 10
   [LSW1-sep-segment1]protected-instance all
   [LSW2]sep segment 1
   [LSW2-sep-segment1]control-vlan 10
   [LSW2-sep-segment1]protected-instance all
   [LSW3]sep segment 1
   [LSW3-sep-segment1]control-vlan 10
   [LSW3-sep-segment1]protected-instance all
   [LSW4]sep segment 1
   [LSW4-sep-segment1]control-vlan 10
   [LSW4-sep-segment1]protected-instance all
   [LSW5]sep segment 1
   [LSW5-sep-segment1]control-vlan 10
   [LSW5-sep-segment1]protected-instance all
   （2）将环网上的设备加入Segment1，并配置端口角色
   [LSW1-GigabitEthernet0/0/3]port link-type hybrid
   [LSW1-GigabitEthernet0/0/3]stp disable //去使能STP
   [LSW1-GigabitEthernet0/0/3]sep segment 1 edge primary //主边缘端口
   [LSW1-GigabitEthernet0/0/2]port link-type hybrid
   [LSW1-GigabitEthernet0/0/2]stp disable
   [LSW1-GigabitEthernet0/0/2]sep segment 1 edge secondary //副边缘端口
   [LSW2-GigabitEthernet0/0/1]port link-type hybrid
   [LSW2-GigabitEthernet0/0/1]stp disable
   [LSW2-GigabitEthernet0/0/1]sep segment 1
   [LSW2-GigabitEthernet0/0/4]port link-type hybrid
   [LSW2-GigabitEthernet0/0/4]stp disable
   [LSW2-GigabitEthernet0/0/4]sep segment 1
   [LSW3-GigabitEthernet0/0/1]port link-type hybrid
   [LSW3-GigabitEthernet0/0/1]stp disable
   [LSW3-GigabitEthernet0/0/1]sep segment 1
   [LSW3-GigabitEthernet0/0/5]port link-type hybrid
   [LSW3-GigabitEthernet0/0/5]stp disable
   [LSW3-GigabitEthernet0/0/5]sep segment 1
   [LSW4-GigabitEthernet0/0/2]port link-type hybrid
   [LSW4-GigabitEthernet0/0/2]stp disable
   [LSW4-GigabitEthernet0/0/2]sep segment 1
   [LSW4-GigabitEthernet0/0/5]port link-type hybrid
   [LSW4-GigabitEthernet0/0/5]stp disable
   [LSW4-GigabitEthernet0/0/5]sep segment 1
   [LSW5-GigabitEthernet0/0/3]port link-type hybrid
   [LSW5-GigabitEthernet0/0/3]stp disable
   [LSW5-GigabitEthernet0/0/3]sep segment 1
   [LSW5-GigabitEthernet0/0/4]port link-type hybrid
   [LSW5-GigabitEthernet0/0/4]stp disable
   [LSW5-GigabitEthernet0/0/4]sep segment 1
   （3）在主边缘端口位于的设备LSW1上配置阻塞端口的方式为依据端口优先级，优先阻塞优先级高的端口
   [LSW1]sep segment 1
   [LSW1-sep-segment1]block port optima
   （4）提高LSW5上的端口GE0/0/4优先级, 优先阻塞优先级高的端口
   [LSW5-GigabitEthernet0/0/4]sep segment 1 priority 128
   （5）在主边缘端口位于的设备LSW1上配置抢占模式为延时抢占，延时抢占时间没有缺省值
   [LSW1-sep-segment1]preempt delay 30
2. 配置二层转发功能
   [LSW1]vlan batch 10 100 200
   [LSW1-GigabitEthernet0/0/1]port link-type hybrid
   [LSW1-GigabitEthernet0/0/1]port hybrid pvid vlan 200
   [LSW1-GigabitEthernet0/0/1]port hybrid tagged vlan 100
   [LSW1-GigabitEthernet0/0/1]port hybrid untagged vlan 200
   [LSW1-GigabitEthernet0/0/2]port hybrid tagged vlan 10 100 200
   [LSW1-GigabitEthernet0/0/3]port hybrid tagged vlan 10 100
   [LSW2-GigabitEthernet0/0/2]port link-type hybrid
   [LSW2-GigabitEthernet0/0/2]port hybrid pvid vlan 200
   [LSW2-GigabitEthernet0/0/2]port hybrid tagged vlan 100
   [LSW2-GigabitEthernet0/0/2]port hybrid untagged vlan 200
   [LSW2-GigabitEthernet0/0/1]port hybrid tagged vlan 10 100 200
   [LSW2-GigabitEthernet0/0/4]port hybrid tagged vlan 10 100
   [LSW3]vlan batch 10 100
   [LSW3-GigabitEthernet0/0/1]port hybrid tagged vlan 100
   [LSW3-GigabitEthernet0/0/5]port hybrid tagged vlan 10 100
   [LSW4]vlan batch 10 100
   [LSW4-GigabitEthernet0/0/2]port hybrid tagged vlan 100
   [LSW4-GigabitEthernet0/0/5]port hybrid tagged vlan 100
   [LSW5]vlan batch 10 100
   [LSW5-GigabitEthernet0/0/3]port hybrid tagged vlan 100
   [LSW5-GigabitEthernet0/0/4]port hybrid tagged vlan 100
   [LSW5-GigabitEthernet0/0/6]port link-type hybrid
   [LSW5-GigabitEthernet0/0/6]port hybrid tagged vlan 100
   [LSW6]vlan batch 100
   [LSW6-GigabitEthernet0/0/5]port link-type hybrid
   [LSW6-GigabitEthernet0/0/5]port hybrid tagged vlan 100
3. 验证配置结果
   

当G0/0/3 shutdown时