华为设备配置IP和虚拟专用网混合FRR

Tony_long7483

已于 2022-06-12 23:47:20 修改

阅读量498

点赞数

分类专栏：网络设计与配置文章标签：华为网络

于 2022-06-12 20:24:57 首次发布

本文链接：https://blog.csdn.net/Tony_long7483/article/details/125249448

版权

网络设计与配置专栏收录该内容

368 篇文章 100 订阅

订阅专栏

在这里插入图片描述

配置接口IP地址
[PE1-LoopBack1]ip add 1.1.1.1 32
[PE1-GigabitEthernet0/0/0]ip add 10.3.1.1 24
[PE2-LoopBack1]ip add 2.2.2.2 32
[PE2-GigabitEthernet0/0/0]ip add 10.3.1.2 24
[CE-GigabitEthernet0/0/0]ip add 10.1.1.3 24
[CE-GigabitEthernet0/0/1]ip add 10.2.1.3 24
[CE-GigabitEthernet0/0/2]ip add 10.5.1.3 24
在MPLS骨干网上配置OSPF协议，实现骨干网PE互通
[PE1]ospf 1
[PE1-ospf-1]area 0
[PE1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0
[PE1-ospf-1-area-0.0.0.0]network 10.3.1.0 0.0.0.255
[PE2]ospf 1
[PE2-ospf-1]area 0
[PE2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[PE2-ospf-1-area-0.0.0.0]network 10.3.1.0 0.0.0.255
在MPLS骨干网上配置MPLS基本能力和MPLS LDP，建立LDP LSP
[PE1]mpls lsr-id 1.1.1.1
[PE1]mpls
[PE1]mpls ldp
[PE1-GigabitEthernet0/0/0]mpls
[PE1-GigabitEthernet0/0/0]mpls ldp
[PE2]mpls lsr-id 2.2.2.2
[PE2]mpls
[PE2]mpls ldp
[PE2-GigabitEthernet0/0/0]mpls
[PE2-GigabitEthernet0/0/0]mpls ldp
在PE设备上配置VPN实例，将CE接入PE
[PE1]ip vpn-instance vpn1
[PE1-vpn-instance-vpn1]ipv4-family
[PE1-vpn-instance-vpn1-af-ipv4]route-distinguisher 100:1
[PE1-vpn-instance-vpn1-af-ipv4]vpn-target 1:1
[PE1-GigabitEthernet0/0/1]ip binding vpn-instance vpn1
[PE1-GigabitEthernet0/0/1]ip add 10.1.1.1 24
[PE2]ip vpn-instance vpn1
[PE2-vpn-instance-vpn1]ipv4-family
100:2
[PE2-vpn-instance-vpn1-af-ipv4]vpn-target 1:1
[PE2-GigabitEthernet0/0/1]ip binding vpn-instance vpn1
[PE2-GigabitEthernet0/0/1]ip add 10.2.1.2 24
CE和PE之间配置静态路由。在PE1和PE2上引入直连VPN路由和静态路由
[PE1]ip route-static vpn-instance vpn1 10.1.5.0 24 g0/0/1 10.1.1.3
[PE1]bgp 100
[PE1-bgp]ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1]import-route direct
[PE1-bgp-vpn1]import-route static
[PE2]ip route-static vpn-instance vpn1 10.5.1.0 24 g0/0/1 10.2.1.3
[PE2]bgp 100
[PE2-bgp]ipv4-family vpn-instance vpn1
[PE2-bgp-vpn1]import-route direct
[PE2-bgp-vpn1]import-route static
[CE]ip route-static 0.0.0.0 0.0.0.0 10.1.1.1 preference 60
[CE]ip route-static 0.0.0.0 0.0.0.0 10.2.1.2 preference 100
在PE之间建立BGP VPNv4对等体
[PE1]bgp 100
[PE1-bgp]peer 2.2.2.2 as-number 100
[PE1-bgp]peer 2.2.2.2 connect-interface LoopBack 1
[PE1-bgp]ipv4-family vpnv4
[PE1-bgp-af-vpnv4]peer 2.2.2.2 enable
[PE2]bgp 100
[PE2-bgp]peer 1.1.1.1 as-number 100
[PE2-bgp]peer 1.1.1.1 connect-interface LoopBack 1
[PE2-bgp]ipv4-family vpnv4
[PE2-bgp-af-vpnv4]peer 1.1.1.1 enable
配置混合FRR路由策略
[PE1]ip ip-prefix f1 permit 10.1.1.3 32
[PE1]route-policy f1 permit node 10
[PE1-route-policy]if-match ip next-hop ip-prefix f1
[PE1-route-policy]apply backup-nexthop 2.2.2.2
使能IP FRR
[PE1]ip vpn-instance vpn1
[PE1-vpn-instance-vpn1]ipv4-family
[PE1-vpn-instance-vpn1-af-ipv4]ip frr route-policy f1