华为无线设备配置WIDS和WIPS

1. 配置LSW和AC，使AP与AC之间能够传输CAPWAP报文
   [LSW1]vlan batch 100
   [LSW1-GigabitEthernet0/0/1]port link-type trunk
   [LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
   [LSW1-GigabitEthernet0/0/2]port link-type trunk
   [LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100
   [LSW1-GigabitEthernet0/0/2]port trunk pvid vlan 100
   [LSW1-GigabitEthernet0/0/3]port link-type trunk
   [LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 100
   [LSW1-GigabitEthernet0/0/3]port trunk pvid vlan 100
   [AC1]vlan batch 100 101
   [AC1-GigabitEthernet0/0/1]port link-type trunk
   [AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

2. 配置AC与上层网络设备互通
   [AC1-GigabitEthernet0/0/2]port link-type trunk
   [AC1-GigabitEthernet0/0/2]port trunk allow-pass vlan 101

3. 配置AC作为DHCP服务器，为STA和AP分配IP地址
   [AC1]dhcp enable
   [AC1-Vlanif100]ip add 10.1.100.1 24
   [AC1-Vlanif100]dhcp select interface
   [AC1-Vlanif101]ip add 10.1.101.1 24
   [AC1-Vlanif101]dhcp select interface

4. 配置AP上线
   [AC1]wlan
   创建AP组
   [AC1-wlan-view]ap-group name ap-group1
   [AC1-wlan-view]ap-group name ap-group2
   创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板
   [AC1-wlan-view]regulatory-domain-profile name domain1
   [AC1-wlan-regulate-domain-domain1]country-code cn
   [AC1-wlan-view]ap-group name ap-group1
   [AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain1
   [AC1-wlan-view]ap-group name ap-group2
   [AC1-wlan-ap-group-ap-group2]regulatory-domain-profile domain1
   配置AC的源接口
   [AC1]capwap source interface Vlanif 100
   在AC上离线导入AP，并将AP1和AP3加入AP组
   [AC1]wlan
   [AC1-wlan-view]ap auth-mode mac-auth
   [AC1-wlan-view]ap-id 0 ap-mac 00e0-fc44-4f80
   [AC1-wlan-ap-0]ap-name ap1
   [AC1-wlan-ap-0]ap-group ap-group1
   [AC1-wlan-view]ap-id 1 ap-mac 00e0-fce2-57f0
   [AC1-wlan-ap-1]ap-name ap3
   [AC1-wlan-ap-1]ap-group ap-group2
   

5. 配置WLAN业务参数
   创建安全模板，并配置安全策略
   [AC1-wlan-view]security-profile name wlan-security
   [AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes
   创建SSID模板，并配置SSID名称
   [AC1-wlan-view]ssid-profile name wlan-ssid
   [AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net
   创建名为“wlan-vap1”的VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板
   [AC1-wlan-view]vap-profile name wlan-vap1
   [AC1-wlan-vap-prof-wlan-vap1]forward-mode tunnel
   [AC1-wlan-vap-prof-wlan-vap1]service-vlan vlan-id 101
   [AC1-wlan-vap-prof-wlan-vap1]security-profile wlan-security
   [AC1-wlan-vap-prof-wlan-vap1]ssid-profile wlan-ssid
   创建名为“wlan-vap2”的VAP模板，引用SSID模板
   [AC1-wlan-view]vap-profile name wlan-vap2
   [AC1-wlan-vap-prof-wlan-vap2]ssid-profile wlan-ssid
   配置AP组引用VAP模板
   [AC1-wlan-view]ap-group name ap-group1
   [AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap1 wlan 1 radio 0
   [AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap1 wlan 1 radio 1
   [AC1-wlan-view]ap-group name ap-group2
   [AC1-wlan-ap-group-ap-group2]vap-profile wlan-vap2 wlan 2 radio 0
   [AC1-wlan-ap-group-ap-group2]vap-profile wlan-vap2 wlan 2 radio 1

6. 配置AP3的射频0工作在监控模式
   [AC1-wlan-ap-group-ap-group2]radio 0
   [AC1-wlan-group-radio-ap-group2/0]work-mode monitor

7. 配置WIDS和WIPS功能
   开启设备检测和非法设备反制功能
   [AC1-wlan-group-radio-ap-group2/0]wids device detect enable
   [AC1-wlan-group-radio-ap-group2/0]wids contain enable
   创建WIDS模板，并配置反制模式为反制非法AP设备
   [AC1-wlan-view]wids-profile name wlan-wids
   [AC1-wlan-wids-prof-wlan-wids]contain-mode spoof-ssid-ap

8. 配置AP组“ap-group2”引用WIDS模板
   [AC1-wlan-view]ap-group name ap-group2
   [AC1-wlan-ap-group-ap-group2]wids-profile wlan-wids