华为无线设备配置利用WDS技术部署WLAN业务

1. 配AC与AP1之间网络互通，配置AP2与AP3之间网络互通
   [LSW2]vlan batch 100 to 101
   [LSW2-GigabitEthernet0/0/1]port link-type trunk
   [LSW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 to 101
   [LSW2-GigabitEthernet0/0/2]port link-type trunk
   [LSW2-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 to 101
   [LSW2-GigabitEthernet0/0/2]port trunk pvid vlan 100
   [LSW1]vlan batch 100 to 101
   [LSW1-GigabitEthernet0/0/1]port link-type trunk
   [LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 to 101
   [LSW1-GigabitEthernet0/0/2]port link-type trunk
   [LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100
   [LSW1-GigabitEthernet0/0/3]port link-type trunk
   [LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 101
   [AC1]vlan batch 100 to 101
   [AC1-GigabitEthernet0/0/1]port link-type trunk
   [AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
   [LSW3]vlan batch 100 to 101
   [LSW3-GigabitEthernet0/0/1]port link-type trunk
   [LSW3-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 to 101
   [LSW3-GigabitEthernet0/0/2]port link-type trunk
   [LSW3-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 to 101
2. 配置汇聚交换机LSW1为PC分配IP地址，AC为AP分配IP地址
   [LSW1]dhcp enable
   [LSW1]interface Vlanif 101
   [LSW1-Vlanif101]ip add 10.1.101.1 24
   [LSW1-Vlanif101]dhcp select interface
   [AC1]dhcp enable
   [AC1]int Vlanif 100
   [AC1-Vlanif100]ip add 10.1.100.1 24
   [AC1-Vlanif100]dhcp select interface
3. 配置AP组、国家码和AC的源接口
   [AC1]wlan
   [AC1-wlan-view]ap-group name wds-root1
   [AC1-wlan-view]ap-group name wds-root2
   [AC1-wlan-view]ap-group name wds-leaf1
   [AC1-wlan-view]ap-group name wds-leaf2
   [AC1-wlan-view]regulatory-domain-profile name domain1
   [AC1-wlan-regulate-domain-domain1]country-code cn
   [AC1-wlan-view]ap-group name wds-root1
   [AC1-wlan-ap-group-wds-root1]regulatory-domain-profile domain1
   [AC1-wlan-view]ap-group name wds-root2
   [AC1-wlan-ap-group-wds-root2]regulatory-domain-profile domain1
   [AC1-wlan-view]ap-group name wds-leaf1
   [AC1-wlan-ap-group-wds-leaf1]regulatory-domain-profile domain1
   [AC1-wlan-view]ap-group name wds-leaf2
   [AC1-wlan-ap-group-wds-leaf2]regulatory-domain-profile domain1
   [AC1]capwap source interface Vlanif 100
   导入AP，并将其加入ap组
   [AC1-wlan-view]ap auth-mode mac-auth
   [AC1-wlan-view]ap-id 1 ap-mac 00e0-fc16-4b90
   [AC1-wlan-ap-1]ap-name ap1
   [AC1-wlan-ap-1]ap-group wds-root1
   [AC1-wlan-view]ap-id 2 ap-mac 00e0-fc71-0860
   [AC1-wlan-ap-2]ap-name ap2
   [AC1-wlan-ap-2]ap-group wds-leaf1
   [AC1-wlan-view]ap-id 3 ap-mac 00e0-fc57-8090
   [AC1-wlan-ap-3]ap-name ap3
   [AC1-wlan-ap-3]ap-group wds-root2
   [AC1-wlan-view]ap-id 4 ap-mac 00e0-fca9-0c50
   [AC1-wlan-ap-4]ap-name ap4
   [AC1-wlan-ap-4]ap-group wds-leaf2
4. 配置WDS业务参数
   配置WDS节点使用的主要射频参数
   [AC1-wlan-view]ap-group name wds-root1
   [AC1-wlan-ap-group-wds-root1]radio 1
   [AC1-wlan-group-radio-wds-root1/1]channel 40mhz-plus 157
   [AC1-wlan-group-radio-wds-root1/1]coverage distance 4
   [AC1-wlan-view]ap-group name wds-root2
   [AC1-wlan-ap-group-wds-root2]radio 1
   [AC1-wlan-group-radio-wds-root2/1]channel 40mhz-plus 149
   [AC1-wlan-group-radio-wds-root2/1]coverage distance 4
   [AC1-wlan-view]ap-group name wds-leaf1
   [AC1-wlan-ap-group-wds-leaf1]radio 1
   [AC1-wlan-group-radio-wds-leaf1/1]channel 40mhz-plus 157
   [AC1-wlan-group-radio-wds-leaf1/1]coverage distance 4
   [AC1-wlan-view]ap-group name wds-leaf2
   [AC1-wlan-ap-group-wds-leaf2]radio 1
   [AC1-wlan-group-radio-wds-leaf2/1]channel 40mhz-plus 149
   [AC1-wlan-group-radio-wds-leaf2/1]coverage distance 4
   配置WDS链路使用的安全模板
   [AC1-wlan-view]security-profile name wds-sec
   [AC1-wlan-sec-prof-wds-sec]security wpa2 psk pass-phrase abc@1234 aes
   配置WDS白名单
   [AC1-wlan-view]wds-whitelist-profile name wds-list2
   [AC1-wlan-wds-whitelist-wds-list2]peer-ap mac 00e0-fca9-0c50
   [AC1-wlan-view]wds-whitelist-profile name wds-list1
   [AC1-wlan-wds-whitelist-wds-list1]peer-ap mac 00e0-fc71-0860
   配置WDS模板“wds-net1”
   [AC1-wlan-view]wds-profile name wds-net1
   [AC1-wlan-wds-prof-wds-net1]wds-name wds-net
   [AC1-wlan-wds-prof-wds-net1]wds-mode root
   [AC1-wlan-wds-prof-wds-net1]security-profile wds-sec
   [AC1-wlan-wds-prof-wds-net1]vlan tagged 101
   配置WDS模板“wds-net2”
   [AC1-wlan-view]wds-profile name wds-net2
   [AC1-wlan-wds-prof-wds-net2]wds-name wds-net
   [AC1-wlan-wds-prof-wds-net2]wds-mode root
   [AC1-wlan-wds-prof-wds-net2]security-profile wds-sec
   [AC1-wlan-wds-prof-wds-net2]vlan tagged 101
   配置WDS模板“wds-net3”
   [AC1-wlan-view]wds-profile name wds-net3
   [AC1-wlan-wds-prof-wds-net3]wds-name wds-net
   [AC1-wlan-wds-prof-wds-net3]wds-mode leaf
   [AC1-wlan-wds-prof-wds-net3]security-profile wds-sec
   [AC1-wlan-wds-prof-wds-net3]vlan tagged 101
   配置AP组“wds-root1”的射频1引用WDS白名单“wds-list1”，只允许AP2接入。配置AP组“wds-root2”的射频1引用WDS白名单“wds-list2”，只允许AP4接入
   [AC1-wlan-view]ap-group name wds-root1
   [AC1-wlan-ap-group-wds-root1]radio 1
   [AC1-wlan-group-radio-wds-root1/1]wds-whitelist-profile wds-list1
   [AC1-wlan-view]ap-group name wds-root2
   [AC1-wlan-ap-group-wds-root2]radio 1
   [AC1-wlan-group-radio-wds-root2/1]wds-whitelist-profile wds-list2
5. 配置AP4的有线口使用的有线口模板，使其有线口模式为“endpoint”,配置有线口的PVID为业务VLAN101，以untagged形式加入VLAN101
   [AC1-wlan-view]wired-port-profile name wired-port
   [AC1-wlan-wired-port-wired-port]mode endpoint
   [AC1-wlan-wired-port-wired-port]vlan pvid 101
   [AC1-wlan-wired-port-wired-port]vlan untagged 101
6. 在AP组引用相关模板，使WDS业务生效
   [AC1-wlan-view]ap-group name wds-root1
   [AC1-wlan-ap-group-wds-root1]wds-profile wds-net1 radio 1
   [AC1-wlan-view]ap-group name wds-root2
   [AC1-wlan-ap-group-wds-root2]wds-profile wds-net2 radio 1
   [AC1-wlan-view]ap-group name wds-leaf1
   [AC1-wlan-ap-group-wds-leaf1]wds-profile wds-net3 radio 1
   [AC1-wlan-view]ap-group name wds-leaf2
   [AC1-wlan-ap-group-wds-leaf2]wds-profile wds-net3 radio 1
   [AC1-wlan-ap-group-wds-leaf2]wired-port-profile wired-port gigabitethernet 0