问题
在电信上申请了网号和密码,想让电脑通过adsl拨号上网。电脑和网络配置如下:
网卡 | eth0,eth1(与调制解调器相连) |
操作系统 | Red Hat Enterprise Linux Server release 5.4 (Tikanga) |
上网账号 | CD02887602942 |
密码 | password |
配置过程
#adsl-stop |
#adsl-setup(开始配置adsl) Welcome to the ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly...
LOGIN NAME Enter your Login Name (default root): CD02887602942(账号)
INTERFACE Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethX, where 'X' is a number. (default eth0): eth1(网卡) Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. Enter the demand value (default no): no(adsl服务一直启动)
DNS Please enter the IP address of your ISP's primary DNS server. If your ISP claims that 'the server will provide dynamic DNS addresses', enter 'server' (all lower-case) here. If you just press enter, I will assume you know what you are doing and not modify your DNS setup. Enter the DNS information here: server(使用动态DNS服务)
PASSWORD Please enter your Password: *****(密码) Please re-enter your Password: ******(密码)
USERCTRL Please enter 'yes' (three letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default yes):yes(允许普通用户使用)
FIREWALLING Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose 'NONE' and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port. The firewall choices are: 0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules. 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN Choose a type of firewall (0-2): 0(关闭防火墙)
Start this connection at boot time Do you want to start this connection at boot time? Please enter no or yes (default no):no(不允许系统启动的时候拨号)
** Summary of what you entered ** Ethernet Interface: eth1 User name: CD02887602942 Activate-on-demand: No DNS addresses: Supplied by ISP's server Firewalling: NONE User Control: yes Accept these settings and adjust configuration files (y/n)?y(确定) |
#adsl-start #ifup eth1 #/etc/init.d/network restart #adsl-connect |
#PING www.a.shifen.com (115.239.210.26) 56(84) bytes of data. 64 bytes from 115.239.210.26: icmp_seq=1 ttl=56 time=51.7 ms 64 bytes from 115.239.210.26: icmp_seq=2 ttl=56 time=52.2 ms |
说明adsl已经设置好了。以后想上网的话,终端中输入adsl-connect即可
#adsl-connect |