CentOS 7 如何设置为eth0网卡

CentOS 7 如何设置为eth0网卡

1、编辑网卡信息

[root@monitor network-scripts]# cat ifcfg-ens192 
TYPE="Ethernet"
BOOTPROTO=none
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
NAME="eno16777736"   修改为eth0
DEVICE="eno16777736"  修改为eth0
ONBOOT="yes"
IPADDR=192.168.1.199
PREFIX=22
GATEWAY=192.168.1.1
DNS1=192.168.1.1

2、修改grub

[root@monitor network-scripts]# cat /etc/sysconfig/grub #编辑grub信息
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb net.ifnames=0 biosdevname=0  quiet"
GRUB_DISABLE_RECOVERY="true"

[root@linuxidc.com network-scripts]#  grub2-mkconfig -o /boot/grub2/grub.cfg #重新生成启动菜单
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.10.0-327.el7.x86_64
Found initrd image: /boot/initramfs-3.10.0-327.el7.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-fce34a37d59940fcb01759910e40ece1
Found initrd image: /boot/initramfs-0-rescue-fce34a37d59940fcb01759910e40ece1.img
done

3、验证更改

[root@linuxidc.com network-scripts]# reboot  #必须重启系统才可生效

//至此输入ifconfig测一下，我成功了！！！
[root@linuxidc.com network-scripts]# ip add |grep eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    inet 192.168.56.131/24 brd 192.168.56.255 scope global eth0

至此修改centos7系列网卡名称圆满成功

springAOP得看一下：
https://www.cnblogs.com/liujiayun/p/5912628.html