What is the power of turning and milling machine

1, turning and milling machine tool reasonable selection of cutting dosage
For efficient metal cutting processing, the material being machined, cutting tools, cutting conditions are the three main elements. These determine the processing time, tool life and processing quality. Cost-effective processing is necessarily a reasonable choice of cutting conditions.
The three elements of cutting conditions: cutting speed, feed and depth of cut directly cause damage to the tool. With an increase in cutting speed, the tool tip temperature rises and mechanical, chemical and thermal wear occurs. A 20% increase in cutting speed reduces tool life by 1/2. The relationship between feed conditions and wear behind the tool arises in a very small range. However, with high feeds, cutting temperature rises and back wear is high. It has a smaller effect on the tool than cutting speed. The effect of depth of cut on the tool is not as great as the cutting speed and feed, but in the tiny depth of cut cutting, the material being cut produces a hardened layer, which also affects the life of the tool. However, in actual operation, the selection of tool life is related to tool wear, dimensional changes of the machined material, surface quality, cutting noise, machining heat, etc. When determining the machining conditions, studies need to be conducted based on actual conditions. For difficult-to-machine materials such as stainless steel and heat-resistant alloys, coolant can be used or choose a good rigidity of the cutting edge.
2, the amount of tool feed (walking tool amount)
Mainly depends on the workpiece processing surface roughness requirements. When finishing, the surface requirements are high, the amount of tool travel is small: 0.06~0.12mm/spindle per revolution. When rough machining, it can be larger. Mainly determined by the tool strength, generally desirable 0.3 or more, tool strength is poor when the main back angle of the tool is large, the amount of feed can not be too large. In addition should also consider the power of the ma 
Source: Internet Disclaimer: Except for the original articles of special statements, the content of this site is only reproduced for the purpose of conveying more information, and does not mean that this website agrees with its views. The copyright of all articles, pictures, audio/video files and other materials reproduced belongs to the copyright owner. In the case of content, copyright and other issues related to the work,
Please notify us by email or phone in a timely manner so that appropriate measures can be taken quickly to avoid unnecessary financial losses to both parties.