三层架构小实验

最新推荐文章于 2022-03-25 01:17:26 发布

YingHuoSX

最新推荐文章于 2022-03-25 01:17:26 发布

阅读量396

点赞数

本文链接：https://blog.csdn.net/YingHuoSX/article/details/112798199

版权

本文档详细记录了一次三层网络架构的小实验过程，包括配置Eth-Trunk、VLAN、STP、SVI、VRRP、DHCP以及静态路由。实验涉及交换机SW1、SW2、SW3、SW4及路由器R1、R2，确保了PC设备能自动获取IP并实现网络互通。

摘要由CSDN通过智能技术生成

在这里插入图片描述
要求如图，着实让我有点头大…
那么开始规划

首先配置Eth-Trunk
SW1:
[Huawei]int Eth-Trunk 0
[Huawei-Eth-Trunk0]q
[Huawei]int g 0/0/1
[Huawei-GigabitEthernet0/0/1]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment…done.
[Huawei-GigabitEthernet0/0/1]int g 0/0/2
[Huawei-GigabitEthernet0/0/2]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment…done.
SW2:
[sw2]int Eth-Trunk 0
[sw2-Eth-Trunk0]int g 0/0/1
[sw2-GigabitEthernet0/0/1]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment…done.
[sw2-GigabitEthernet0/0/1]int g 0/0/2
[sw2-GigabitEthernet0/0/2]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment…done.

接下来配置VLAN ( 记得先创建VLAN )
SW1:
[sw1]interface Eth-Trunk 0
[sw1-Eth-Trunk0]port link-type trunk
[sw1-Eth-Trunk0]port trunk allow-pass vlan 1 to 2
[sw1-Eth-Trunk0]q
[sw1-vlan3]q
[sw1]interface GigabitEthernet 0/0/5
[sw1-GigabitEthernet0/0/5]port link-type access
[sw1-GigabitEthernet0/0/5]port default vlan 3
[sw1]interface GigabitEthernet 0/0/3
[sw1-GigabitEthernet0/0/3]port hybrid tagged vlan 1 to 2
[sw1-GigabitEthernet0/0/3]int g 0/0/4
[sw1-GigabitEthernet