目录
三、使用swarm实现Web集群部署，实现基于4个节点的swarm集群
3.1 部署web服务集群机器环境(四台机器，CentOS 7系统)
四、创建NFS服务服务器为所有的节点提供相同Web数据，使用数据卷，为容器提供一致的Web数据
4.7 使用nfs服务服务器共享的文件，通过volume数据卷是否共享文件成功
五、使用Nginx+keepalived实现双VIP负载均衡高可用
5.8 展示使用keepalived实现双VIP高可用的步骤
六、使用Prometheus实现对swarm集群的监控，结合Grafana成图工具进行数据展示
一、概述
概述：
项目实战有利于对已学知识的整合归纳，提高对相关知识的掌握程度，本次项目实战利用swarm+Prometheus实现一个双VIP高可用可监控的Web服务器集群，使用Nginx做负载均衡器，同时采用swarm管理的Docker集群并对外提供Web服务，使用keepalived的双vip实现HA，使用Prometheus+Grafana实现对Web服务器的监控。
二、规划整个项目的拓扑结构和项目的思维导图
思维导图
项目服务器如下：
IP：192.168.232.132 主机名：docker-manager-1 担任角色：swarm manager
IP：192.168.232.133 主机名：docker-2 担任角色：swarm worker node1
IP：192.168.232.134 主机名：docker-3 担任角色：swarm worker node2
IP：192.168.232.131 主机名：zengkaijie 担任角色：swarm worker node3
IP：192.168.232.135 主机名：nfs-server 担任角色：nfs服务服务器
IP：192.168.232.136 主机名：load-balancer担任角色：负载均衡器(master)
IP：192.168.232.137 主机名：load-balancer担任角色：负载均衡器（backup）
IP：192.168.232.138 主机名：prometheus-server 担任角色：prometheus-server
三、使用swarm实现Web集群部署，实现基于4个节点的swarm集群
3.1 部署web服务集群机器环境(四台机器，CentOS 7系统)
IP：192.168.232.132 主机名：docker-manager-1 担任角色：swarm manager
IP：192.168.232.133 主机名：docker-2 担任角色：swarm worker node1
IP：192.168.232.134 主机名：docker-3 担任角色：swarm worker node2
IP：192.168.232.131 主机名：zengkaijie 担任角色：swarm worker node3
3.2 配置hosts文件
swarm manager：
[root@docker-manager-1 ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.232.132 manager
192.168.232.133 worker1
192.168.232.134 worker2
192.168.232.131 worker3
[root@docker-manager-1 ~]# getenforce
Disabled另外三台worker node操作一致
3.3 设置防火墙和sellinux
关闭四台机器上的防火墙。
如果是开启防火墙，则需要在所有节点的防火墙上依次放行2377/tcp（管理端口）、7946/udp（节点间通信端口）、4789/udp（overlay 网络端口，容器之间）端口。
[root@docker-manager-1 ~]# systemctl disable firewalld
[root@docker-manager-1 ~]#[root@docker-2 ~]# systemctl disable firewalld
[root@docker-2 ~]#另外两台操作一致，不再赘述。
3.4 重启docker服务，防止导致网络异常
[root@docker-manager-1 ~]# service docker restart
Redirecting to /bin/systemctl restart docker.service
[root@docker-manager-1 ~]#[root@docker-2 ~]# service docker restart
Redirecting to /bin/systemctl restart docker.service
[root@docker-2 ~]#[root@docker-3 ~]# service docker restart
Redirecting to /bin/systemctl restart docker.service
[root@docker-3 ~]#[root@docker-3 ~]# service docker restart
Redirecting to /bin/systemctl restart docker.service
[root@docker-3 ~]#root@zengkaijie:~# service docker restart
root@zenkkaiaijie:~#3.5 创建swarm集群
对于manager：
# 命令：docker swarm init --advertise-addr manager的IP地址
[root@docker-manager-1 ~]# docker swarm init --advertise-addr 192.168.232.132
Swarm initialized: current node (ooauma1x037wufqkh21uj0j7v) is now a manager.
To add a worker to this swarm, run the following command:
docker swarm join --token SWMTKN-1-0200k3nv43fmc6hcuurx8z1iehsqq6uro12qjfeoxrkmk9fmom-1ub4wsmlpl4zhqalzdrgukx3l 192.168.232.132:2377
To add a manager to this swarm, run 'docker swarm join-token manager' and follow the instructions.
[root@docker-manager-1 ~]#对于三台swarm nodes
输入manager创建的命令： docker swarm join --token ……,此命令在manager创建swarm时会自动生成。
[root@docker-2 ~]# docker swarm join --token SWMTKN-1-0200k3nv43fmc6hcuurx8z1iehsqq6uro12qjfeoxrkmk9fmom-1ub4wsmlpl4zhqalzdrgukx3l 192.168.232.132:2377
This node joined a swarm as a worker.
[root@docker-2 ~]#[root@docker-3 ~]# docker swarm join --token SWMTKN-1-0200k3nv43fmc6hcuurx8z1iehsqq6uro12qjfeoxrkmk9fmom-1ub4wsmlpl4zhqalzdrgukx3l 192.168.232.132:2377
This node joined a swarm as a worker.
[root@docker-3 ~]#root@zengkaijie:~# docker swarm join --token SWMTKN-1-0200k3nv43fmc6hcuurx8z1iehsqq6uro12qjfeoxrkmk9fmom-1ub4wsmlpl4zhqalzdrgukx3l 192.168.232.132:2377
This node joined a swarm as a worker.
root@zengkaijie:~#四、创建NFS服务服务器为所有的节点提供相同Web数据，使用数据卷，为容器提供一致的Web数据
4.1 准备一台服务器担任NFS Server
客户机配置：CentOS7（1核/2G）
IP地址：192.168.232.135
修改好主机名：nfs-server
root@docker-4 ~]# hostnamectl set-hostname nfs-server
[root@docker-4 ~]# su
[root@nfs-server ~]#共享的Web集群服务器信息如下：
IP：192.168.232.132 主机名：docker-manager-1 担任角色：swarm manager
IP：192.168.232.133 主机名：docker-2 担任角色：swarm node1
IP：192.168.232.134 主机名：docker-3 担任角色：swarm node2
IP：192.168.232.131 主机名：zengkaijie 担任角色：swarm node3
4.2 安装和启动nfs服务
[root@nfs-server ~]# yum install nfs-utils -y
[root@nfs-server ~]# service nfs-server start
Redirecting to /bin/systemctl start nfs-server.service
[root@nfs-server ~]#查看nfs服务的进程： ps aux|grep nfs
[root@nfs-server ~]# ps aux|grep nfs
root 2346 0.0 0.1 50108 2672 ? Ss 19:39 0:00 /usr/sbin/nfsdcld
root 2352 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2353 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2354 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2355 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2356 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2357 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2358 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2359 0.0 0.0 0 0 ? S 19:39 0:00 [nfsd]
root 2367 0.0 0.0 12324 1064 pts/0 S+ 19:40 0:00 grep --color=auto nfs
[root@nfs-server ~]#4.3 通过NFS共享文件
编辑/etc/exports,写好共享的具体目录、权限以及共享的网段、IP。
[root@nfs-server /]# vim /etc/exports
[root@nfs-server /]# cat /etc/exports
/web 192.168.232.0/24(rw,all_squash,sync)
/download 192.168.232.0/24(ro,all_squash,sync)
[root@nfs-server /]#刷新输出文件的列表
[root@nfs-server /]# exportfs -rv
exporting 192.168.232.0/24:/download
exporting 192.168.232.0/24:/web
[root@nfs-server /]#
[root@nfs-server /]# cd /download/
[root@nfs-server download]# ls
[root@nfs-server download]# vim chao.txt
[root@nfs-server download]# ls
chao.txt
[root@nfs-server download]# exportfs -rv
exporting 192.168.232.0/24:/download
exporting 192.168.232.0/24:/web
[root@nfs-server download]#4.4 关闭防火墙和selinux
[root@nfs-server download]# service firewalld stop
Redirecting to /bin/systemctl stop firewalld.service
[root@nfs-server download]# systemctl disable firewalld
[root@nfs-server download]# getenforce
Disabled
[root@nfs-server download]#4.5 在客户机上挂载宿主机上的NFS服务器共享的目录
在客户机上安装NFS服务：yum install nfs-utils -y
[root@docker-2 lianxi]# yum install nfs-utils -y查看宿主机共享的目录
[root@docker-2 lianxi]# showmount -e 192.168.232.135
Export list for 192.168.232.135:
/download 192.168.232.0/24
/web 192.168.232.0/24
[root@docker-2 lianxi]#4.6 挂载nfs-server上的共享目录到客户机
[root@docker-2 lianxi]# mount 192.168.232.135:/web /web
[root@docker-2 lianxi]# cd /web
[root@docker-2 web]# ls
1.jpg index.html rep.html
[root@docker-2 web]#
[root@docker-2 web]# df -Th
文件系统 类型 容量 已用 可用 已用% 挂载点
devtmpfs devtmpfs 876M 0 876M 0% /dev
tmpfs tmpfs 896M 0 896M 0% /dev/shm
tmpfs tmpfs 896M 18M 878M 2% /run
tmpfs tmpfs 896M 0 896M 0% /sys/fs/cgroup
/dev/mapper/cl-root xfs 17G 8.2G 8.9G 48% /
/dev/sda1 xfs 1014M 193M 822M 19% /boot
tmpfs tmpfs 180M 0 180M 0% /run/user/0
overlay overlay 17G 8.2G 8.9G 48% /var/lib/docker/overlay2/c2434295873b6ce0f136d4851cb9a9bf10b1ebf77e80f611841484967b857c94/merged
overlay overlay 17G 8.2G 8.9G 48% /var/lib/docker/overlay2/8b5420179cd05a4a8ea039ba9357f7d59ddfec2fd3f185702a5a0d97883564f2/merged
overlay overlay 17G 8.2G 8.9G 48% /var/lib/docker/overlay2/d9f99510abb4c5d5496e54d11ff763be47610ee7851207aec9fdbb1022f14016/merged
overlay overlay 17G 8.2G 8.9G 48% /var/lib/docker/overlay2/5a87e34567ece3a64a835bcd4cfe59d2ebdf0d36bf74fbd07dff8c82a94f37a2/merged
overlay overlay 17G 8.2G 8.9G 48% /var/lib/docker/overlay2/b70caa1ed0c781711a41cd82a0a91d465a6e02418633bfa00ce398c92405baff/merged
192.168.232.135:/web nfs4 17G 7.8G 9.2G 46% /web
[root@docker-2 web]#[root@docker-manager-1 web]# ls
[root@docker-manager-1 web]# mount 192.168.232.135:/web /web
[root@docker-manager-1 web]# ls
[root@docker-manager-1 web]# cd /web
[root@docker-manager-1 web]# ls
1.jpg index.html rep.html
[root@docker-manager-1 web]# df -Th
……
overlay overlay 17G 8.3G 8.8G 49% /var/lib/docker/overlay2/06cbd339366e8aeb492b21561573d953073e203122262e5089461da0d0d316a0/merged
overlay overlay 17G 8.3G 8.8G 49% /var/lib/docker/overlay2/a132f32c9cff25a1a143e325f2aecd0186630df66748c95984bb3cf2ce9fe8b2/merged
overlay overlay 17G 8.3G 8.8G 49% /var/lib/docker/overlay2/e1efba32267a46940402f682034d07ed51b8ee200186d5acc0c48144cd9fe31e/merged
192.168.232.135:/web nfs4 17G 7.8G 9.2G 46% /web
[root@docker-manager-1 web]#[root@docker-3 web]# showmount 192.168.232.135 -e
Export list for 192.168.232.135:
/download 192.168.232.0/24
/web 192.168.232.0/24
[root@docker-3 web]# mount 192.168.232.135:/web /web
[root@docker-3 web]# cd /web
[root@docker-3 web]# ls
1.jpg index.html rep.html
[root@docker-3 web]# df -TH
文件系统 类型 容量 已用 可用 已用% 挂载点
devtmpfs devtmpfs 919M 0 919M 0% /dev
tmpfs tmpfs 939M 0 939M 0% /dev/shm
tmpfs tmpfs 939M 18M 921M 2% /run
tmpfs tmpfs 939M 0 939M 0% /sys/fs/cgroup
/dev/mapper/cl-root xfs 19G 8.8G 9.6G 48% /
/dev/sda1 xfs 1.1G 202M 862M 19% /boot
tmpfs tmpfs 188M 0 188M 0% /run/user/0
overlay overlay 19G 8.8G 9.6G 48% /var/lib/docker/overlay2/8b5420179cd05a4a8ea039ba9357f7d59ddfec2fd3f185702a5a0d97883564f2/merged
overlay overlay 19G 8.8G 9.6G 48% /var/lib/docker/overlay2/c2434295873b6ce0f136d4851cb9a9bf10b1ebf77e80f611841484967b857c94/merged
overlay overlay 19G 8.8G 9.6G 48% /var/lib/docker/overlay2/6b933ab92577f653a29dcac782a2c5e79bcdbbf219a7ccebb38b585ef117e0b4/merged
overlay overlay 19G 8.8G 9.6G 48% /var/lib/docker/overlay2/40cc77a0f1c7281915947c1fefeb595837eb75fffec0d808a9994ac1fbde5f90/merged
192.168.232.135:/web nfs4 19G 8.4G 9.9G 46% /web
[root@docker-3 web]#root@zengkaijie:~# mkdir /web
root@zengkaijie:~# mount 192.168.232.135:/web /web
root@zengkaijie:~# cd /web
root@zengkaijie:/web# ls
1.jpg index.html rep.html
root@chaochao:/web# df -Th
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 433M 0 433M 0% /dev
tmpfs tmpfs 96M 1.6M 94M 2% /run
/dev/mapper/ubuntu--vg-ubuntu--lv ext4 19G 6.9G 11G 39% /
tmpfs tmpfs 477M 0 477M 0% /dev/shm
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs tmpfs 477M 0 477M 0% /sys/fs/cgroup
/dev/sda2 ext4 976M 202M 707M 23% /boot
/dev/loop1 squashfs 70M 70M 0 100% /snap/lxd/19188
/dev/loop3 squashfs 71M 71M 0 100% /snap/lxd/21029
/dev/loop2 squashfs 56M 56M 0 100% /snap/core18/2074
/dev/loop4 squashfs 33M 33M 0 100% /snap/snapd/12704
/dev/loop5 squashfs 32M 32M 0 100% /snap/snapd/10707
/dev/loop6 squashfs 56M 56M 0 100% /snap/core18/2128
tmpfs tmpfs 96M 0 96M 0% /run/user/1000
overlay overlay 19G 6.9G 11G 39% /var/lib/docker/overlay2/a2d7dea3b856302cf61d9584be91aa69614a8b25db3a7b6c91317d71a6d68a3c/merged
overlay overlay 19G 6.9G 11G 39% /var/lib/docker/overlay2/c6188638a4df298b840dce222da041733de01e636362c34c4c0e34cec9a34e08/merged
overlay overlay 19G 6.9G 11G 39% /var/lib/docker/overlay2/e94850d48ea1962457edacef2d09cfaa838fad8b9899d4455c9b31caa11c07e1/merged
192.168.232.135:/web nfs4 17G 7.8G 9.2G 46% /web
root@zengkaijie:/web#4.7 使用nfs服务服务器共享的文件，通过volume数据卷是否共享文件成功
命令：docker service create --name nfs-service-1 --mount 'type=volume,source=nfs-volume,target=/usr/share/nginx/html,volume-driver=local,volume-opt=type=nfs,volume-opt=device=:/web,"volume-opt=o=addr=192.168.232.135,rw,nfsvers=4,async"' --replicas 10 -p 8026:80 nginx:latest
source=nfs-volume --> docker宿主机上的卷的名字
/usr/share/nginx/html -->容器里存放网页的目录
volume-driver=local --> 访问本地的某个目录的
volume-opt=type=nfs --> volume对nfs的支持选项
volume-opt=device=:/web --> 是nfs服务器共享目录
volume-opt=o=addr=192.168.232.135,rw,nfsvers=4,async 挂载具体的nfs服务器的ip地址和选项
--replicas 10 副本的数量
nfsvers=4 --> nfs版本
async --> 异步
[root@docker-manager-1 web]# docker service create --name nfs-service-1 --mount 'type=volume,source=nfs-volume,target=/usr/share/nginx/html,volume-driver=local,volume-opt=type=nfs,volume-opt=device=:/web,"volume-opt=o=addr=192.168.232.135,rw,nfsvers=4,async"' --replicas 10 -p 8026:80 nginx:latest
3ws4b26bo2tgi48czckm6jin7
overall progress: 10 out of 10 tasks
1/10: running [==================================================>]
2/10: running [==================================================>]
3/10: running [==================================================>]
4/10: running [==================================================>]
5/10: running [==================================================>]
6/10: running [==================================================>]
7/10: running [==================================================>]
8/10: running [==================================================>]
9/10: running [==================================================>]
10/10: running [==================================================>]
verify: Service converged
[root@docker-manager-1 web]#
[root@docker-manager-1 ~]# cd /var/lib/docker/volumes/nfs-volume/_data
[root@docker-manager-1 _data]# ls
1.jpg index.html rep.html
[root@docker-manager-1 _data]#
[root@docker-2 ~]# cd /var/lib/docker/volumes/nfs-volume/_data
[root@docker-2 _data]# ls
1.jpg index.html rep.html
[root@docker-2 _data]#4.8 访问服务，成功实现文件共享
五、使用Nginx+keepalived实现双VIP负载均衡高可用
首先实现负载均衡，步骤如下：
5.1 准备两台台客户机作为负载均衡器
IP：192.168.232.136 主机名：load-balancer担任角色：负载均衡器（master）
IP：192.168.232.137 主机名：load-balancer担任角色：负载均衡器（backup）
5.2 编译脚本
[root@load-balancer ~]# vim onekey_install_lizhichao_nginx_v10.sh
[root@load-balancer ~]# cat onekey_install_lizhichao_nginx_v10.sh
#!/bin/bash
#解决软件的依赖关系，需要安装的软件包
yum -y install zlib zlib-devel openssl openssl-devel pcre pcre-devel gcc gcc-c++ autoconf automake make psmisc net-tools lsof vim wget
#新建chaochao用户和组
id chaochao || useradd chaochao -s /sbin/nologin
#下载nginx软件
mkdir /lzc_load_balancing -p
cd /lzc_load_balancing
wget http://nginx.org/download/nginx-1.21.1.tar.gz
#解压软件
tar xf nginx-1.21.1.tar.gz
#进入解压后的文件夹
cd nginx-1.21.1
#编译前的配置
./configure --prefix=/usr/local/lzc_load_balancing --user=chaochao --group=chaochao --with-http_ssl_module --with-threads --with-http_v2_module --with-http_stub_status_module --with-stream
#如果上面的编译前的配置失败，直接退出脚本
if (( $? != 0));then
exit
fi
#编译
make -j 2
#编译安装
make install
#修改PATH变量
echo "PATH=$PATH:/usr/local/lzc_load_balancing/sbin" >>/root/.bashrc
#执行修改了环境变量的脚本
source /root/.bashrc
#firewalld and selinux
#stop firewall和设置下次开机不启动firewalld
service firewalld stop
systemctl disable firewalld
#临时停止selinux和永久停止selinux
setenforce 0
sed -i '/^SELINUX=/ s/enforcing/disabled/' /etc/selinux/config
#开机启动
chmod +x /etc/rc.d/rc.local
echo "/usr/local/lzc_load_balancing/sbin/nginx" >>/etc/rc.local
[root@load-balancer ~]#5.3 运行安装脚本
[root@load-balacer ~]# bash onekey_install_lizhichao_nginx_v10.sh
……
test -d '/usr/local/lzc_load_balancing/logs' \
|| mkdir -p '/usr/local/lzc_load_balancing/logs'
make[1]: 离开目录“/lzc_load_balancing/nginx-1.21.1”
Redirecting to /bin/systemctl stop firewalld.service
[root@load-balancer ~]#5.4 启动nginx
命令：
nginx 启动nginx
nginx -s stop 关闭nginx
[root@load-balancer nginx-1.21.1]# nginx
[root@load-balancer nginx-1.21.1]#
[root@load-balancer nginx-1.21.1]# ps aux|grep nginx
root 9301 0.0 0.2 119148 2176 ? Ss 18:20 0:00 nginx: master process nginx
nginx 9302 0.0 0.9 151824 7912 ? S 18:20 0:00 nginx: worker process
root 9315 0.0 0.1 12344 1108 pts/0 S+ 18:21 0:00 grep --color=auto nginx
[root@load-banlancer nginx-1.21.1]# ss -anplut|grep nginx
tcp LISTEN 0 128 0.0.0.0:80 0.0.0.0:* users:(("nginx",pid=9302,fd=9),("nginx",pid=9301,fd=9))
tcp LISTEN 0 128 [::]:80 [::]:* users:(("nginx",pid=9302,fd=10),("nginx",pid=9301,fd=10))
[root@load-banlancer nginx-1.21.1]#5.5 配置nginx里的负载均衡功能
[root@load-balancer nginx-1.21.1]# cd /usr/local/zkj_load_balancing/
[root@load-balancer zkj_load_balancing]# ls
conf html logs sbin
[root@load-balancer zkj_load_balancing]# cd conf/
[root@load-balancer conf]# ls
fastcgi.conf fastcgi_params.default mime.types nginx.conf.default uwsgi_params
fastcgi.conf.default koi-utf mime.types.default scgi_params uwsgi_params.default
fastcgi_params koi-win nginx.conf scgi_params.default win-utf
[root@load-balancer conf]# vim nginx.conf
[root@load-balancer conf]# cat nginx.conf #以下仅显示修改了的脚本部分
http {
include mime.types;
default_type application/octet-stream;
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
upstream zkjweb{ #定义一个负载均衡器的名字为：zkjweb
server 192.168.232.132:8026;
server 192.168.232.131:8026;
server 192.168.232.133:8026;
server 192.168.232.134:8026;
}
server {
listen 80;
server_name www.zengkaijie.com; #设置域名为www.zengkaijie.com
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
server 192.168.232.134:8026;
}
server {
listen 80;
server_name www.zengkaijie.com; #设置域名为zengkaijie
location /{
proxy_pass http://zkjweb; #调用负载均衡器
}
[root@load-balancer conf]# nginx -s reload # 重新加载配置文件
[root@load-banlancer conf]# ps aux|grep nginx
root 9301 0.0 1.2 120068 9824 ? Ss 18:20 0:00 nginx: master process nginx
nginx 9395 0.1 1.0 152756 8724 ? S 19:16 0:00 nginx: worker process
root 9397 0.0 0.1 12344 1044 pts/0 S+ 19:18 0:00 grep --color=auto nginx
[root@load-balancer conf]#5.6 在Windows添加IP映射并查看效果
修改windows的hosts文件，点击此处查看方法
在C:\Windows\System32\drivers\etc的hosts文件
接下来在swarm集群上查看。
[root@docker-manager-1 ~]# vim /etc/hosts
[root@docker-manager-1 ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.232.132 manager
192.168.232.133 worker1
192.168.232.134 worker2
192.168.232.131 worker3
192.168.232.136 www.zengkaijie.com
[root@docker-manager-1 ~]# curl www.zengkaijie.com
<html>
<head>
<title>zengkajie</title>
</head>
<body>
<p>name:zengkaijie</p>
<p>sex:male</p>
<p>tel:123456789</p>
<img src=1.jpg>
<a href=rep.html>reputation</a>
</body>
</html>
[root@docker-manager-1 ~]#5.7 查看负载均衡的分配情况
用抓包工具来查看：tcpdump
[root@load-balancer ~]# yum install tcpdump -y另一台负载均衡器操作一致，不再赘述。（同时也可以通过克隆客户机快速实现两台负载均衡
5.8 展示使用keepalived实现双VIP高可用的步骤
第一步：安装keepalived
命令：yum install keepalived -y
[root@load-balancer ~]# yum install keepalived -y[root@load-balancer-2 ~]# yum install keepalived -y第二步：配置keepalived.conf文件
对于单VIP下的master：
[root@load-balancer ~]# vim /etc/keepalived/keepalived.conf
[root@load-balancer ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
vrrp_skip_check_adv_addr
#vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VI_1 {
state MASTER
interface ens33
virtual_router_id 168
priority 220
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.168
}
}
vrrp_instance VI_2 {
state BACKUP
interface ens33
virtual_router_id 169
priority 180
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.169
}
}
[root@load-balancer ~]#[root@load-balancer-2 ~]# vim /etc/keepalived/keepalived.conf
[root@load-balancer-2 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
vrrp_skip_check_adv_addr
#vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 168
priority 130
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.168
}
}
vrrp_instance VI_2 {
state MASTER
interface ens33
virtual_router_id 169
priority 200
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.169
}
}
[root@load-balancer-2 ~]#[root@load-balancer-2 ~]# vim /etc/keepalived/keepalived.conf
[root@load-balancer-2 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
vrrp_skip_check_adv_addr
#vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 168
priority 130
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.168
}
}
vrrp_instance VI_2 {
state MASTER
interface ens33
virtual_router_id 169
priority 200
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.169
}
}
[root@load-balancer-2 ~]#[root@load-balancer-2 ~]# vim /etc/keepalived/keepalived.conf
[root@load-balancer-2 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
vrrp_skip_check_adv_addr
#vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 168
priority 130
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.168
}
}
vrrp_instance VI_2 {
state MASTER
interface ens33
virtual_router_id 169
priority 200
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.232.169
}
}
[root@load-balancer-2 ~]#第三步：重启keepalived服务
对于单VIP下的master：
[root@load-balancer ~]# service keepalived restart
Redirecting to /bin/systemctl restart keepalived.service
[root@load-balancer ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:0c:29:9a:d6:b6 brd ff:ff:ff:ff:ff:ff
inet 192.168.232.136/24 brd 192.168.232.255 scope global dynamic noprefixroute ens33
valid_lft 1374sec preferred_lft 1374sec
inet 192.168.232.168/32 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::b4cd:b005:c610:7b3b/64 scope link dadfailed tentative noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::40fb:5be0:b6f9:b063/64 scope link dadfailed tentative noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::2513:c641:3555:5eeb/64 scope link dadfailed tentative noprefixroute
valid_lft forever preferred_lft forever
[root@load-balancer ~]#对于单VIP下的backup：
[root@load-balancer-2 ~]# service keepalived restart
Redirecting to /bin/systemctl restart keepalived.service
[root@load-balancer-2 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:0c:29:04:e5:b4 brd ff:ff:ff:ff:ff:ff
inet 192.168.232.137/24 brd 192.168.232.255 scope global dynamic noprefixroute ens33
valid_lft 1435sec preferred_lft 1435sec
inet 192.168.232.169/32 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::b4cd:b005:c610:7b3b/64 scope link dadfailed tentative noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::40fb:5be0:b6f9:b063/64 scope link dadfailed tentative noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::2513:c641:3555:5eeb/64 scope link dadfailed tentative noprefixroute
valid_lft forever preferred_lft forever
[root@load-balancer-2 ~]#第四步：测试是否成功实现
[root@load-balancer-2 ~]# nginx
[root@load-balancer-2 ~]# curl 192.168.232.169
<html>
<head>
<title>zengkaijie</title>
</head>
<body>
<p>name:zengkaijie</p>
<p>sex:male</p>
<p>tel:123456789</p>
<img src=1.jpg>
<a href=rep.html>reputation</a>
</body>
</html>
[root@load-balancer-2 ~]#六、使用Prometheus实现对swarm集群的监控，结合Grafana成图工具进行数据展示
6.1 环境部署
IP：192.168.232.138 主机名：prometheus-server 担任角色：prometheus-server
IP：192.168.232.136 主机名：load-balancer担任角色：负载均衡器(master)
IP：192.168.232.137 主机名：load-balancer担任角色：负载均衡器（backup）
IP：192.168.232.132 主机名：docker-manager-1 担任角色：swarm manager
IP：192.168.232.133 主机名：docker-2 担任角色：swarm worker node1
IP：192.168.232.134 主机名：docker-3 担任角色：swarm worker node2
IP：192.168.232.131 主机名：zengkaijie 担任角色：swarm worker node3
IP：192.168.232.135 主机名：nfs-server 担任角色：nfs服务器
6.2 载Prometheus安装包并解压到服务器
[root@prometheus-server ~]# mkdir /prometheus
[root@prometheus-server ~]# cp prometheus-2.29.1.linux-amd64.tar.gz /prometheus/
[root@prometheus-server ~]# cd /prometheus
[root@prometheus-server prometheus]# ls
prometheus-2.29.1.linux-amd64.tar.gz
[root@prometheus-server prometheus]# tar xf prometheus-2.29.1.linux-amd64.tar.gz
[root@prometheus-server prometheus]# ls
prometheus-2.29.1.linux-amd64 prometheus-2.29.1.linux-amd64.tar.gz
[root@prometheus-server prometheus]# cd prometheus-2.29.1.linux-amd64
[root@prometheus-server prometheus-2.29.1.linux-amd64]# ls
console_libraries consoles LICENSE NOTICE prometheus prometheus.yml promtool6.3 修改环境变量
[root@prometheus-server prometheus-2.29.1.linux-amd64]# PATH=$PATH:/prometheus/prometheus-2.29.1.linux-amd64
[root@prometheus-server prometheus-2.29.1.linux-amd64]# which prometheus
/prometheus/prometheus-2.29.1.linux-amd64/prometheus
[root@prometheus-server prometheus-2.29.1.linux-amd64]#问题：误输入PATH命令导致ls，vim等识别不了
解决方法：输入命令：export PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
TIPS：
此步骤可以添加环境变量到.bashrc文件
[root@prometheus-server prometheus-2.29.1.linux-amd64]# cat /root/.bashrc
# .bashrc
# User specific aliases and functions
alias rm='rm -i'
alias cp='cp -i'
alias mv='mv -i'
# Source global definitions
if [ -f /etc/bashrc ]; then
. /etc/bashrc
fi
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin:/usr/local/lzc_load_balancing/sbin
PATH=$PATH:/prometheus/prometheus-2.29.1.linux-amd64
[root@prometheus-server prometheus-2.29.1.linux-amd64]#6.4 启动Prometheus
命令：./prometheus --config.file=prometheus.yml
后台运行命令：nohup ./prometheus --config.file=prometheus.yml &
[root@prometheus-server prometheus-2.29.1.linux-amd64]# ./prometheus --config.file=prometheus.yml
level=info ts=2021-08-25T12:00:48.976Z caller=main.go:390 msg="No time or size retention was set so using the default time retention" duration=15d
level=info ts=2021-08-25T12:00:48.977Z caller=main.go:428 msg="Starting Prometheus" version="(version=2.29.1, branch=HEAD, revision=dcb07e8eac34b5ea37cd229545000b857f1c1637)"
level=info ts=2021-08-25T12:00:48.977Z caller=main.go:433 build_context="(go=go1.16.7, user=root@364730518a4e, date=20210811-14:48:27)"6.5 查看Prometheus进程
[root@prometheus-server prometheus-2.29.1.linux-amd64]# ps aux|grep prometheus
root 1677 2.6 8.1 780596 64948 pts/0 Sl+ 20:00 0:01 ./prometheus --config.file=prometheus.yml
root 1733 0.0 0.1 12344 1060 pts/1 R+ 20:01 0:00 grep --color=auto prometheus
[root@prometheus-server prometheus-2.29.1.linux-amd64]#6.6 访问Prometheus
http://localhost:9090/graph --》web界面的
http://localhost:9090/metrics ---》查看prometheus的各种指标
接下来在被监控的服务器上安装exporter
在swarm manager上安装exporter为例
1.安装node_exporter
[root@docker-manager-1 ~]# mkdir /exporter
[root@docker-manager-1 ~]# cd /exporter/
[root@docker-manager-1 exporter]# ls
[root@docker-manager-1 exporter]# ls
node_exporter-1.2.2.linux-amd64.tar.gz
[root@docker-manager-1 exporter]#2.运行exporter
命令：nohup ./node_exporter --web.listen-address="0.0.0.0:9100" &
[root@docker-manager-1 node_exporter-1.2.2.linux-amd64]# nohup ./node_exporter --web.listen-address="0.0.0.0:9100" &
[1] 120539
[root@docker-manager-1 node_exporter-1.2.2.linux-amd64]# nohup: 忽略输入并把输出追加到'nohup.out'
[root@docker-manager-1 node_exporter-1.2.2.linux-amd64]# ps aux|grep exporter
root 120539 0.0 0.6 716436 11888 pts/0 Sl 11:23 0:00 ./node_exporter --web.listen-address=0.0.0.0:9100
root 120551 0.0 0.0 12324 996 pts/0 S+ 11:23 0:00 grep --color=auto exporter
[root@docker-manager-1 node_exporter-1.2.2.linux-amd64]#3.在Prometheus-server上面修改Prometheus.yml文件
[root@prometheus-server prometheus-2.29.1.linux-amd64]# vim prometheus.yml
[root@prometheus-server prometheus-2.29.1.linux-amd64]# cat prometheus.yml
# my global config
global:
scrape_interval: 15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
# scrape_timeout is set to the global default (10s).
# Alertmanager configuration
alerting:
alertmanagers:
- static_configs:
- targets:
# - alertmanager:9093
# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
rule_files:
# - "first_rules.yml"
# - "second_rules.yml"
# A scrape configuration containing exactly one endpoint to scrape:
# Here it's Prometheus itself.
scrape_configs:
# The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
- job_name: "prometheus"
# metrics_path defaults to '/metrics'
# scheme defaults to 'http'.
static_configs:
- targets: ["localhost:9090"]
- job_name: "swarm-manager"
# metrics_path defaults to '/metrics'
# scheme defaults to 'http'.
static_configs:
- targets: ["192.168.232.132:9100"] 4.重启Prometheus服务
[root@prometheus-server prometheus-2.29.1.linux-amd64]# ps aux|grep prome
root 1677 0.0 5.6 1044504 44944 ? Sl 05:49 0:18 ./prometheus --config.file=prometheus.yml
root 2552 0.0 0.1 12344 1076 pts/1 R+ 11:27 0:00 grep --color=auto prome
[root@prometheus-server prometheus-2.29.1.linux-amd64]# kill -9 1677
[root@prometheus-server prometheus-2.29.1.linux-amd64]# ps aux|grep prome
root 2556 0.0 0.1 12344 1196 pts/1 R+ 11:28 0:00 grep --color=auto prome
[root@prometheus-server prometheus-2.29.1.linux-amd64]# nohup ./prometheus --config.file=prometheus.yml &
[1] 2640
[root@prometheus-server prometheus-2.29.1.linux-amd64]# nohup: 忽略输入并把输出追加到'nohup.out'
^C
[root@prometheus-server prometheus-2.29.1.linux-amd64]# ps aux|grep prom
root 2640 4.0 11.5 782384 92084 pts/1 Sl 11:38 0:00 ./prometheus --config.file=prometheus.yml
root 2648 0.0 0.1 12344 1044 pts/1 S+ 11:38 0:00 grep --color=auto prom5.访问Prometheus
其他三个工具节点操作一致，在这里不再赘述
接下来在Prometheus server进行grafana的安装部署
1.创建grafana.repo文件
[root@prometheus-server yum.repos.d]# vim grafana.repo
[root@prometheus-server yum.repos.d]# cat grafana.repo
[grafana]
name=grafana
baseurl=https://packages.grafana.com/enterprise/rpm
repo_gpgcheck=1
enabled=1
gpgcheck=1
gpgkey=https://packages.grafana.com/gpg.key
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
[root@prometheus-server yum.repos.d]#2.安装grafana
[root@prometheus-server yum.repos.d]# yum install grafana -y3.运行grafana server
[root@prometheus-server yum.repos.d]# systemctl start grafana-server
[root@prometheus-server yum.repos.d]#
[root@prometheus-server yum.repos.d]# ps aux|grep grafana
root 3019 0.0 0.1 169472 800 ? Ss 14:34 0:00 gpg-agent --homedir /var/cache/dnf/grafana-ee12c6ab2813e349/pubring --use-standard-socket --daemon
grafana 3553 4.0 10.0 1302412 80140 ? Ssl 14:36 0:01 /usr/sbin/grafana-server --config=/etc/grafana/grafana.ini --pidfile=/var/run/grafana/grafana-server.pid --packaging=rpm cfg:default.paths.logs=/var/log/grafana cfg:default.paths.data=/var/lib/grafana cfg:default.paths.plugins=/var/lib/grafana/plugins cfg:default.paths.provisioning=/etc/grafana/provisioning
root 3563 0.0 0.1 12344 1192 pts/4 R+ 14:37 0:00 grep --color=auto grafana
[root@prometheus-server yum.repos.d]#
[root@prometheus-server yum.repos.d]# ss -anplut|grep grafana
tcp LISTEN 0 128 *:3000 *:* users:(("grafana-server",pid=3553,fd=8))
[root@prometheus-server yum.repos.d]#
[root@prometheus-server yum.repos.d]# grafana-server -v
Version 8.1.2 (commit: 103f8fa094, branch: HEAD)
[root@prometheus-server yum.repos.d]#4.访问grafana
默认账号和密码都是admin
同时导入json格式的监控模板。
导入node-exporter-for-prometheus-dashboard-cn-v20201010_rev24.json模板到grafana,并访问
以上便是本次项目的具体实施步骤，如有疑问以及错误之处，希望大家通过私信反应，博主很期待与各位交流~
Prometheus部分可参考博主的监控专栏
805
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
