深入分析redis cluster 集群安装配置详解

下面小编来为各位介绍一篇深入分析redis cluster 集群安装配置详解，如果你希望做数据库集群就可以来看看此文章的哦。

Redis 集群是一个提供在多个Redis间节点间共享数据的程序集.redis3.0以前，只支持主从同步的，如果主的挂了，写入就成问题了。3.0出来后就可以很好帮我们解决这个问题。

目前redis 3.0还不稳定，如果要用在生产环境中，要慎重。

一，redis服务器说明

192.168.10.219 6379

192.168.10.219 6380

192.168.10.219 6381

192.168.10.220 6382

192.168.10.220 6383

192.168.10.220 6384

要让集群正常运作至少需要三个主节点，不过在刚开始试用集群功能时， 强烈建议使用六个节点： 其中三个为主节点， 而其余三个则是各个主节点的从节点。所有用二台机器，开6个redis进程，模拟6台机器。

二，安装ruby,rubygems

# yum -y install gcc openssl-devel libyaml-devel libffi-devel readline-devel zlib-devel gdbm-devel ncurses-devel gcc-c++ automake autoconf

# yum -y install ruby rubygems //安装ruby rubygems

//换源

# gem source -l

# gem source --remove http://rubygems.org/

# gem sources -a http://ruby.taobao.org/

# gem source -l

# gem install redis --version 3.0.0 //安装gem_redis

Successfully installed redis-3.0.0

1 gem installed

Installing ri documentation for redis-3.0.0...

Installing RDoc documentation for redis-3.0.0...

以前写过一篇ruby on rails的文章，请参考：centos ruby on rails apache mysql 安装配置详解

喜欢手动编译的人，可以参考这篇文章，安装ruby.

三，安装redis3.0.0

1，安装redis

# wget http://download.redis.io/releases/redis-3.0.0.tar.gz

# tar -xvzf redis-3.0.0.tar.gz

# cd redis-3.0.0

# make && make install

# cd src

# cp redis-trib.rb /usr/local/bin

# mkdir /etc/redis

# mkdir /var/log/redis

上述操作要先在二台机器上面都操作好。

2,配置redis

[root@slave2 redis-3.0.0]# vim redis.conf //解压的根目录，有redis.conf,做以下修改

port 6379

pidfile /var/run/redis-6379.pid

dbfilename dump-6379.rdb

appendfilename "appendonly-6379.aof"

cluster-config-file nodes-6379.conf

cluster-enabled yes

cluster-node-timeout 5000

appendonly yes

3，copy配置文件，并修改端口

# cp redis.conf /etc/redis/redis-6379.conf

# cp redis.conf /etc/redis/redis-6380.conf

# cp redis.conf /etc/redis/redis-6381.conf

# scp redis.conf 192.168.10.220:/etc/redis/redis-6382.conf

# scp redis.conf 192.168.10.220:/etc/redis/redis-6383.conf

# scp redis.conf 192.168.10.220:/etc/redis/redis-6384.conf

# sed -i "s/6379/6380/g" /etc/redis/redis-6380.conf

# sed -i "s/6379/6381/g" /etc/redis/redis-6381.conf

# sed -i "s/6379/6382/g" /etc/redis/redis-6382.conf

# sed -i "s/6379/6383/g" /etc/redis/redis-6383.conf

# sed -i "s/6379/6384/g" /etc/redis/redis-6384.conf

将配置文件分别copy到二台机器上，并替换端口：

# cat redis-6380.conf |awk '{if($0 !~ /^$/ && $0 !~ /#/) {print $0}}' |grep 6380

pidfile /var/run/redis-6380.pid

port 6380

dbfilename dump-6380.rdb

appendfilename "appendonly-6380.aof"

cluster-config-file nodes-6380.conf

有5处修改端口的地方

4，启动并查看redis

# redis-server /etc/redis/redis-6379.conf > /var/log/redis/redis-6379.log 2>&1 &

# redis-server /etc/redis/redis-6380.conf > /var/log/redis/redis-6380.log 2>&1 &

# redis-server /etc/redis/redis-6381.conf > /var/log/redis/redis-6381.log 2>&1 &

# redis-server /etc/redis/redis-6382.conf > /var/log/redis/redis-6382.log 2>&1 &

# redis-server /etc/redis/redis-6383.conf > /var/log/redis/redis-6383.log 2>&1 &

# redis-server /etc/redis/redis-6384.conf > /var/log/redis/redis-6384.log 2>&1 &

# netstat -tpnl |grep redis

tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN 7298/redis-server *

tcp 0 0 0.0.0.0:6380 0.0.0.0:* LISTEN 7299/redis-server *

tcp 0 0 0.0.0.0:6381 0.0.0.0:* LISTEN 7304/redis-server *

tcp 0 0 0.0.0.0:16379 0.0.0.0:* LISTEN 7298/redis-server *

tcp 0 0 0.0.0.0:16380 0.0.0.0:* LISTEN 7299/redis-server *

tcp 0 0 0.0.0.0:16381 0.0.0.0:* LISTEN 7304/redis-server *

tcp 0 0 :::6379 :::* LISTEN 7298/redis-server *

tcp 0 0 :::6380 :::* LISTEN 7299/redis-server *

tcp 0 0 :::6381 :::* LISTEN 7304/redis-server *

tcp 0 0 :::16379 :::* LISTEN 7298/redis-server *

tcp 0 0 :::16380 :::* LISTEN 7299/redis-server *

tcp 0 0 :::16381 :::* LISTEN 7304/redis-server *

[root@slave2 redis]# ll /etc/redis/

总用量 156

-rw-r--r-- 1 root root 0 4月 30 23:54 appendonly-6379.aof

-rw-r--r-- 1 root root 0 5月 1 00:08 appendonly-6380.aof

-rw-r--r-- 1 root root 0 5月 1 00:08 appendonly-6381.aof

-rw-r--r-- 1 root root 18 5月 1 00:08 dump-6379.rdb

-rw-r--r-- 1 root root 18 5月 1 00:08 dump-6380.rdb

-rw-r--r-- 1 root root 18 5月 1 00:08 dump-6381.rdb

-rw-r--r-- 1 root root 763 5月 1 00:08 nodes-6379.conf

-rw-r--r-- 1 root root 763 5月 1 00:08 nodes-6380.conf

-rw-r--r-- 1 root root 763 5月 1 00:08 nodes-6381.conf

-rw-r--r-- 1 root root 41412 4月 30 23:30 redis-6379.conf

-rw-r--r-- 1 root root 41412 4月 30 23:39 redis-6380.conf

-rw-r--r-- 1 root root 41412 4月 30 23:39 redis-6381.conf

所有节点都启动成功，并不代表，他们就是集群了。

四，创建集群，并查看

1，创建redis集群

# redis-trib.rb create --replicas 1 192.168.10.219:6379 192.168.10.219:6380 192.168.10.219:6381 192.168.10.220:6382 192.168.10.220:6383 192.168.10.220:6384

2，查看redis集群状态

[root@slave2 redis]# redis-trib.rb check 192.168.10.219:6379

Connecting to node 192.168.10.219:6379: OK

Connecting to node 192.168.10.220:6384: OK

Connecting to node 192.168.10.219:6381: OK

Connecting to node 192.168.10.220:6383: OK

Connecting to node 192.168.10.220:6382: OK

Connecting to node 192.168.10.219:6380: OK

>>> Performing Cluster Check (using node 192.168.10.219:6379)

M: d40d9a367c24784b0336c7b80fb4c87337e2cba6 192.168.10.219:6379

slots:5461-10922 (5462 slots) master

1 additional replica(s)

S: 5f00f163d0c0a540ea99daf004f55588a802327b 192.168.10.220:6384

slots: (0 slots) slave

replicates d40d9a367c24784b0336c7b80fb4c87337e2cba6

S: b3b1a848987b5a87a06888e126d5c9b16f871ff5 192.168.10.219:6381

slots: (0 slots) slave

replicates d2eb5a8a77f87888792428aed4692dfb907e7a1d

M: d2eb5a8a77f87888792428aed4692dfb907e7a1d 192.168.10.220:6383

slots:10923-16383 (5461 slots) master

1 additional replica(s)

M: a8eafe8b19d6a28c034917da13a43ce1230fe870 192.168.10.220:6382

slots:0-5460 (5461 slots) master

1 additional replica(s)

S: a87d207204a53ab599bf7f6ffb9d679d0eef4f25 192.168.10.219:6380

slots: (0 slots) slave

replicates a8eafe8b19d6a28c034917da13a43ce1230fe870

[OK] All nodes agree about slots configuration.

>>> Check for open slots...

>>> Check slots coverage...

[OK] All 16384 slots covered.

到这儿，redis集群就配置成功了

五，测试redis集群

# redis-cli -c -p 6379 -h 192.168.10.219 //在219登录

192.168.10.219:6379> set tank tank1 //设置测试值

-> Redirected to slot [4407] located at 192.168.10.220:6382

OK //直接转向到220 6382端口，数据存到了220 6382，不过有点奇怪

192.168.10.220:6382> get tank //可以取到值

"tank1"

[root@manage redis]# redis-cli -c -p 6383 -h 192.168.10.220 //220机器，6383端口

192.168.10.220:6383> get tank

-> Redirected to slot [4407] located at 192.168.10.220:6382 //直接转向220 6382端口

"tank1"

[root@manage redis]# ps aux |grep redis //查看进程

root 7310 0.2 0.9 137436 9724 pts/0 Sl Apr30 0:09 redis-server *:6382 [cluster]

root 7311 0.2 0.9 137436 9776 pts/0 Sl Apr30 0:09 redis-server *:6383 [cluster]

root 7316 0.2 0.9 137436 9944 pts/0 Sl Apr30 0:10 redis-server *:6384 [cluster]

root 7478 0.0 0.0 103256 812 pts/0 S+ 00:56 0:00 grep redis

[root@manage redis]# kill -9 7310 //关闭220 6382端口，看数据会不会丢失

[root@slave2 redis]# redis-trib.rb check 192.168.10.219:6379 //查看集群情况，任何接口都行

Connecting to node 192.168.10.219:6379: OK

Connecting to node 192.168.10.220:6384: OK

Connecting to node 192.168.10.219:6381: OK

Connecting to node 192.168.10.220:6383: OK

Connecting to node 192.168.10.219:6380: OK

>>> Performing Cluster Check (using node 192.168.10.219:6379)

M: d40d9a367c24784b0336c7b80fb4c87337e2cba6 192.168.10.219:6379

slots:5461-10922 (5462 slots) master

1 additional replica(s)

S: 5f00f163d0c0a540ea99daf004f55588a802327b 192.168.10.220:6384

slots: (0 slots) slave

replicates d40d9a367c24784b0336c7b80fb4c87337e2cba6

S: b3b1a848987b5a87a06888e126d5c9b16f871ff5 192.168.10.219:6381

slots: (0 slots) slave

replicates d2eb5a8a77f87888792428aed4692dfb907e7a1d

M: d2eb5a8a77f87888792428aed4692dfb907e7a1d 192.168.10.220:6383

slots:10923-16383 (5461 slots) master

1 additional replica(s)

M: a87d207204a53ab599bf7f6ffb9d679d0eef4f25 192.168.10.219:6380

slots:0-5460 (5461 slots) master

0 additional replica(s)

[OK] All nodes agree about slots configuration.

>>> Check for open slots...

>>> Check slots coverage...

[OK] All 16384 slots covered. //变成，三主二从了

[root@slave2 redis]# redis-cli -c -p 6379 -h 192.168.10.219 //219登录

192.168.10.219:6379> get tank

-> Redirected to slot [4407] located at 192.168.10.219:6380 //数据被转到了6380节点了

"tank1"

经测试，集群是可用的。