kubeadm安装Kubernetes V1.10集群详细文档
1:服务器信息以及节点介绍
系统信息:centos1708 minimal 只修改IP地址
主机名称 | IP | 备注 |
---|---|---|
node01 | 192.168.150.181 | master and etcd |
rode02 | 192.168.150.182 | master and etcd |
node03 | 192.168.150.183 | master and etcd |
node04 | 192.168.150.184 | node |
VIP | 192.168.150.186 |
软件版本:
docker17.03.2-ce
socat-1.7.3.2-2.el7.x86_64
kubelet-1.10.0-0.x86_64
kubernetes-cni-0.6.0-0.x86_64
kubectl-1.10.0-0.x86_64
kubeadm-1.10.0-0.x86_64
1:环境初始化
1:分别在4台主机设置主机名称
hostnamectl set-hostname node01 hostnamectl set-hostname node02 hostnamectl set-hostname node03 hostnamectl set-hostname node04
2:配置主机映射
cat <<EOF > /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.150.181 node01 192.168.150.182 node02 192.168.150.183 node03 192.168.150.184 node04 EOF
3:node01上执行ssh免密码登陆配置
ssh-keygen #一路回车即可 ssh-copy-id node02 ssh-copy-id node03 ssh-copy-id node04
4:四台主机配置、停防火墙、关闭Swap、关闭Selinux、设置内核、K8S的yum源、安装依赖包、配置ntp(配置完后建议重启一次)
systemctl stop firewalld systemctl disable firewalld swapoff -a sed -i 's/.*swap.*/#&/' /etc/fstab setenforce 0 sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/sysconfig/selinux sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/selinux/config modprobe br_netfilter cat <<EOF > /etc/sysctl.d/k8s.conf net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 EOF sysctl -p /etc/sysctl.d/k8s.conf ls /proc/sys/net/bridge cat <<EOF > /etc/yum.repos.d/kubernetes.repo [kubernetes] name=Kubernetes baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/ enabled=1 gpgcheck=1 repo_gpgcheck=1 gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg EOF yum install -y epel-release yum install -y yum-utils device-mapper-persistent-data lvm2 net-tools conntrack-tools wget vim ntpdate libseccomp libtool-ltdl systemctl enable ntpdate.service echo '*/30 * * * * /usr/sbin/ntpdate time7.aliyun.com >/dev/null 2>&1' > /tmp/crontab2.tmp crontab /tmp/crontab2.tmp systemctl start ntpdate.service echo "* soft nofile 65536" >> /etc/security/limits.conf echo "* hard nofile 65536" >> /etc/security/limits.conf echo "* soft nproc 65536" >> /etc/security/limits.conf echo "* hard nproc 65536" >> /etc/security/limits.conf echo "* soft memlock unlimited" >> /etc/security/limits.conf echo "* hard memlock unlimited" >> /etc/security/limits.conf
2:安装、配置keepalived(主节点)
1:安装keepalived
yum install -y keepalived systemctl enable keepalived
node01的keepalived.conf
cat <<EOF > /etc/keepalived/keepalived.conf global_defs { router_id LVS_k8s } vrrp_script CheckK8sMaster { script "curl -k https://192.168.150.186:6443" interval 3 timeout 9 fall 2 rise 2 } vrrp_instance VI_1 { state MASTER interface ens160 virtual_router_id 61 priority 100 advert_int 1 mcast_src_ip 192.168.150.181 nopreempt authentication { auth_type PASS auth_pass sqP05dQgMSlzrxHj } unicast_peer { 192.168.150.182 192.168.150.183 } virtual_ipaddress { 192.168.150.186/24 } track_script { CheckK8sMaster } } EOF
node02的keepalived.conf
cat <<EOF > /etc/keepalived/keepalived.conf global_defs { router_id LVS_k8s } global_defs { router_id LVS_k8s } vrrp_script CheckK8sMaster { script "curl -k https://192.168.150.186:6443" interval 3 timeout 9 fall 2 rise 2 } vrrp_instance VI_1 { state BACKUP interface ens160 virtual_router_id 61 priority 90 advert_int 1 mcast_src_ip 192.168.150.182 nopreempt authentication { auth_type PASS auth_pass sqP05dQgMSlzrxHj } unicast_peer { 192.168.150.181 192.168.150.183 } virtual_ipaddress { 192.168.150.186/24 } track_script { CheckK8sMaster } } EOF
node03的keepalived.conf
cat <<EOF > /etc/keepalived/keepalived.conf global_defs { router_id LVS_k8s } global_defs { router_id LVS_k8s } vrrp_script CheckK8sMaster { script "curl -k https://192.168.150.186:6443" interval 3 timeout 9 fall 2 rise 2 } vrrp_instance VI_1 { state BACKUP interface ens160 virtual_router_id 61 priority 80 advert_int 1 mcast_src_ip 192.168.150.183 nopreempt authentication { auth_type PASS auth_pass sqP05dQgMSlzrxHj } unicast_peer { 192.168.150.181 192.168.150.182 } virtual_ipaddress { 192.168.150.186/24 } track_script { CheckK8sMaster } } EOF
2:启动keepalived
systemctl restart keepalived
可以看到VIP已经绑定到node01上面了
ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:50:56:b2:09:6a brd ff:ff:ff:ff:ff:ff inet 192.168.150.181/24 brd 192.168.150.255 scope global ens160 valid_lft forever preferred_lft forever inet 192.168.150.186/24 scope global secondary ens160 valid_lft forever preferred_lft forever inet6 fe80::e3d1:55df:2f64:8571/64 scope link valid_lft forever preferred_lft forever
3:创建etcd证书(node01上执行即可)
1:设置cfssl环境
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 chmod +x cfssl_linux-amd64 mv cfssl_linux-amd64 /usr/local/bin/cfssl chmod +x cfssljson_linux-amd64 mv cfssljson_linux-amd64 /usr/local/bin/cfssljson chmod +x cfssl-certinfo_linux-amd64 mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo export PATH=/usr/local/bin:$PATH
2:创建 CA 配置文件(下面配置的IP为etc节点的IP)
mkdir /root/ssl cd /root/ssl cat > ca-config.json <<EOF { "signing": { "default": { "expiry": "8760h" }, "profiles": { "kubernetes-Soulmate": { "usages": [ "signing", "key encipherment", "server auth", "client auth" ], "expiry": "8760h" } } } } EOF cat > ca-csr.json <<EOF { "CN": "kubernetes-Soulmate", "key": { "algo": "rsa", "size": 2048 }, "names": [ { "C": "CN", "ST": "shanghai", "L": "shanghai", "O": "k8s", "OU": "System" } ] } EOF cfssl gencert -initca ca-csr.json | cfssljson -bare ca cat > etcd-csr.json <<EOF { "CN": "etcd", "hosts": [ "127.0.0.1", "192.168.150.181", "192.168.150.182", "192.168.150.183" ], "key": { "algo": "rsa", "size": 2048 }, "names": [ { "C": "CN", "ST": "shanghai", "L": "shanghai", "O": "k8s", "OU": "System" } ] } EOF cfssl gencert -ca=ca.pem \ -ca-key=ca-key.pem \ -config=ca-config.json \ -profile=kubernetes-Soulmate etcd-csr.json | cfssljson -bare etcd
3:node01分发etcd证书到node02、node03上面
mkdir -p /etc/etcd/ssl cp etcd.pem etcd-key.pem ca.pem /etc/etcd/ssl/ ssh -n node02 "mkdir -p /etc/etcd/ssl && exit" ssh -n node03 "mkdir -p /etc/etcd/ssl && exit" scp -r /etc/etcd/ssl/*.pem node02:/etc/etcd/ssl/ scp -r /etc/etcd/ssl/*.pem node03:/etc/etcd/ssl/
4:安装配置etcd (三主节点)
1:安装etcd
yum install etcd -y mkdir -p /var/lib/etcd
node01的etcd.service
cat <<EOF >/etc/systemd/system/etcd.service [Unit] Description=Etcd Server After=network.target After=network-online.target Wants=network-online.target Documentation=https://github.com/coreos [Service] Type=notify WorkingDirectory=/var/lib/etcd/ ExecStart=/usr/bin/etcd \ --name node01 \ --cert-file=/etc/etcd/ssl/etcd.pem \ --key-file=/etc/etcd/ssl/etcd-key.pem \ --peer-cert-file=/etc/etcd/ssl/etcd.pem \ --peer-key-file=/etc/etcd/ssl/etcd-key.pem \ --trusted-ca-file=/etc/etcd/ssl/ca.pem \ --peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \ --initial-advertise-peer-urls https://192.168.150.181:2380 \ --listen-peer-urls https://192.168.150.181:2380 \ --listen-client-urls https://192.168.150.181:2379,http://127.0.0.1:2379 \ --advertise-client-urls https://192.168.150.181:2379 \ --initial-cluster-token etcd-cluster-0 \ --initial-cluster node01=https://192.168.150.181:2380,node02=https://192.168.150.182:2380,node03=https://192.168.150.183:2380 \ --initial-cluster-state new \ --data-dir=/var/lib/etcd Restart=on-failure RestartSec=5 LimitNOFILE=65536 [Install] WantedBy=multi-user.target EOF
node02的etcd.service
cat <<EOF >/etc/systemd/system/etcd.service [Unit] Description=Etcd Server After=network.target After=network-online.target Wants=network-online.target Documentation=https://github.com/coreos [Service] Type=notify WorkingDirectory=/var/lib/etcd/ ExecStart=/usr/bin/etcd \ --name node02 \ --cert-file=/etc/etcd/ssl/etcd.pem \ --key-file=/etc/etcd/ssl/etcd-key.pem \ --peer-cert-file=/etc/etcd/ssl/etcd.pem \ --peer-key-file=/etc/etcd/ssl/etcd-key.pem \ --trusted-ca-file=/etc/etcd/ssl/ca.pem \ --peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \ --initial-advertise-peer-urls https://192.168.150.182:2380 \ --listen-peer-urls https://192.168.150.182:2380 \ --listen-client-urls https://192.168.150.182:2379,http://127.0.0.1:2379 \ --advertise-client-urls https://192.168.150.182:2379 \ --initial-cluster-token etcd-cluster-0 \ --initial-cluster node01=https://192.168.150.181:2380,node02=https://192.168.150.182:2380,node03=https://192.168.150.183:2380 \ --initial-cluster-state new \ --data-dir=/var/lib/etcd Restart=on-failure RestartSec=5 LimitNOFILE=65536 [Install] WantedBy=multi-user.target EOF
node03的etcd.service
cat <<EOF >/etc/systemd/system/etcd.service [Unit] Description=Etcd Server After=network.target After=network-online.target Wants=network-online.target Documentation=https://github.com/coreos [Service] Type=notify WorkingDirectory=/var/lib/etcd/ ExecStart=/usr/bin/etcd \ --name node03 \ --cert-file=/etc/etcd/ssl/etcd.pem \ --key-file=/etc/etcd/ssl/etcd-key.pem \ --peer-cert-file=/etc/etcd/ssl/etcd.pem \ --peer-key-file=/etc/etcd/ssl/etcd-key.pem \ --trusted-ca-file=/etc/etcd/ssl/ca.pem \ --peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \ --initial-advertise-peer-urls https://192.168.150.183:2380 \ --listen-peer-urls https://192.168.150.183:2380 \ --listen-client-urls https://192.168.150.183:2379,http://127.0.0.1:2379 \ --advertise-client-urls https://192.168.150.183:2379 \ --initial-cluster-token etcd-cluster-0 \ --initial-cluster node01=https://192.168.150.181:2380,node02=https://192.168.150.182:2380,node03=https://192.168.150.183:2380 \ --initial-cluster-state new \ --data-dir=/var/lib/etcd Restart=on-failure RestartSec=5 LimitNOFILE=65536 [Install] WantedBy=multi-user.target EOF
2:添加自启动(etc集群最少2个节点才能启动,启动报错看mesages日志)
mv etcd.service /usr/lib/systemd/system/ systemctl daemon-reload systemctl enable etcd systemctl start etcd systemctl status etcd
3:在三个etcd节点执行一下命令检查
etcdctl --endpoints=https://192.168.150.181:2379,https://192.168.150.182:2379,https://192.168.150.183:2379 \ --ca-file=/etc/etcd/ssl/ca.pem \ --cert-file=/etc/etcd/ssl/etcd.pem \ --key-file=/etc/etcd/ssl/etcd-key.pem cluster-health
5:所有节点安装配置docker
1:安装docker(kubeadm目前支持docker最高版本是17.03.x)
yum install https://mirrors.aliyun.com/docker-ce/linux/centos/7/x86_64/stable/Packages/docker-ce-selinux-17.03.2.ce-1.el7.centos.noarch.rpm -y yum install https://mirrors.aliyun.com/docker-ce/linux/centos/7/x86_64/stable/Packages/docker-ce-17.03.2.ce-1.el7.centos.x86_64.rpm -y
修改配置文件 vim /usr/lib/systemd/system/docker.service
ExecStart=/usr/bin/dockerd -H tcp://0.0.0.0:2375 -H unix:///var/run/docker.sock --registry-mirror=https://ms3cfraz.mirror.aliyuncs.com
启动docker
systemctl daemon-reload systemctl restart docker systemctl enable docker systemctl status docker
6: 安装、配置kubeadm
1:所有节点安装kubelet kubeadm kubectl
yum install -y kubelet kubeadm kubectl systemctl enable kubelet
2: 所有节点修改kubelet配置文件
/etc/systemd/system/kubelet.service.d/10-kubeadm.conf
#修改这一行 Environment="KUBELET_CGROUP_ARGS=--cgroup-driver=cgroupfs" #添加这一行 Environment="KUBELET_EXTRA_ARGS=--v=2 --fail-swap-on=false --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/k8sth/pause-amd64:3.0"
3:所有节点修改完配置文件一定要重新加载配置
systemctl daemon-reload systemctl enable kubelet
4: 命令补全
yum install -y bash-completion source /usr/share/bash-completion/bash_completion source <(kubectl completion bash) echo "source <(kubectl completion bash)" >> ~/.bashrc
7:初始化集群
1:node01、node02、node03添加集群初始配置文件(集群配置文件一样)
cat <<EOF > config.yaml apiVersion: kubeadm.k8s.io/v1alpha1 kind: MasterConfiguration etcd: endpoints: - https://192.168.150.181:2379 - https://192.168.150.182:2379 - https://192.168.150.183:2379 caFile: /etc/etcd/ssl/ca.pem certFile: /etc/etcd/ssl/etcd.pem keyFile: /etc/etcd/ssl/etcd-key.pem dataDir: /var/lib/etcd networking: podSubnet: 10.244.0.0/16 kubernetesVersion: 1.10.0 api: advertiseAddress: "192.168.150.186" token: "b99a00.a144ef80536d4344" tokenTTL: "0s" apiServerCertSANs: - node01 - node02 - node03 - 192.168.150.181 - 192.168.150.182 - 192.168.150.183 - 192.168.150.184 - 192.168.150.186 featureGates: CoreDNS: true imageRepository: "registry.cn-hangzhou.aliyuncs.com/k8sth" EOF
2:首先node01初始化集群
配置文件定义podnetwork是10.244.0.0/16
kubeadmin init –hlep可以看出,service默认网段是10.96.0.0/12
/etc/systemd/system/kubelet.service.d/10-kubeadm.conf默认dns地址cluster-dns=10.96.0.10
kubeadm init --config config.yaml
初始化失败后处理办法
kubeadm reset #或 rm -rf /etc/kubernetes/*.conf rm -rf /etc/kubernetes/manifests/*.yaml docker ps -a |awk '{print $1}' |xargs docker rm -f systemctl stop kubelet
初始化正常的结果如下
Your Kubernetes master has initialized successfully! To start using your cluster, you need to run the following as a regular user: mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config You should now deploy a pod network to the cluster. Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at: https://kubernetes.io/docs/concepts/cluster-administration/addons/ You can now join any number of machines by running the following on each node as root: kubeadm join 192.168.150.186:6443 --token b99a00.a144ef80536d4344 --discovery-token-ca-cert-hash sha256:f79b68fb698c92b9336474eb3bf184e847f967dc58a6296911892662b98b1315
3:node01上面执行如下命令
mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config
4:kubeadm生成证书密码文件分发到node02和node03上面去
scp -r /etc/kubernetes/pki node03:/etc/kubernetes/ scp -r /etc/kubernetes/pki node02:/etc/kubernetes/
5:部署flannel网络,只需要在node01执行就行
wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml #版本信息:quay.io/coreos/flannel:v0.10.0-amd64 kubectl create -f kube-flannel.yml
执行命令
[root@node01 ~]# kubectl get node NAME STATUS ROLES AGE VERSION node01 Ready master 31m v1.10.0
[root@node01 ~]# kubectl get pods --all-namespaces NAMESPACE NAME READY STATUS RESTARTS AGE kube-system coredns-7997f8864c-4x7mg 1/1 Running 0 29m kube-system coredns-7997f8864c-zfcck 1/1 Running 0 29m kube-system kube-apiserver-node01 1/1 Running 0 29m kube-system kube-controller-manager-node01 1/1 Running 0 30m kube-system kube-flannel-ds-hw2xb 1/1 Running 0 1m kube-system kube-proxy-s265b 1/1 Running 0 29m kube-system kube-scheduler-node01 1/1 Running 0 30m
6:部署dashboard
kubectl create -f kubernetes-dashboard.yaml
获取token,通过令牌登陆
kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}')
通过firefox访问dashboard,输入token,即可登陆
https://192.168.150.181:30000/#!/login
kubernetes-dashboard.yaml文件内容如下
# Copyright 2017 The Kubernetes Authors. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Configuration to deploy release version of the Dashboard UI compatible with # Kubernetes 1.8. # # Example usage: kubectl create -f <this_file> # ------------------- Dashboard Secret ------------------- # apiVersion: v1 kind: Secret metadata: labels: k8s-app: kubernetes-dashboard name: kubernetes-dashboard-certs namespace: kube-system type: Opaque --- # ------------------- Dashboard Service Account ------------------- # apiVersion: v1 kind: ServiceAccount metadata: labels: k8s-app: kubernetes-dashboard name: kubernetes-dashboard namespace: kube-system --- # ------------------- Dashboard Role & Role Binding ------------------- # kind: Role apiVersion: rbac.authorization.k8s.io/v1 metadata: name: kubernetes-dashboard-minimal namespace: kube-system rules: # Allow Dashboard to create 'kubernetes-dashboard-key-holder' secret. - apiGroups: [""] resources: ["secrets"] verbs: ["create"] # Allow Dashboard to create 'kubernetes-dashboard-settings' config map. - apiGroups: [""] resources: ["configmaps"] verbs: ["create"] # Allow Dashboard to get, update and delete Dashboard exclusive secrets. - apiGroups: [""] resources: ["secrets"] resourceNames: ["kubernetes-dashboard-key-holder", "kubernetes-dashboard-certs"] verbs: ["get", "update", "delete"] # Allow Dashboard to get and update 'kubernetes-dashboard-settings' config map. - apiGroups: [""] resources: ["configmaps"] resourceNames: ["kubernetes-dashboard-settings"] verbs: ["get", "update"] # Allow Dashboard to get metrics from heapster. - apiGroups: [""] resources: ["services"] resourceNames: ["heapster"] verbs: ["proxy"] - apiGroups: [""] resources: ["services/proxy"] resourceNames: ["heapster", "http:heapster:", "https:heapster:"] verbs: ["get"] --- apiVersion: rbac.authorization.k8s.io/v1 kind: RoleBinding metadata: name: kubernetes-dashboard-minimal namespace: kube-system roleRef: apiGroup: rbac.authorization.k8s.io kind: Role name: kubernetes-dashboard-minimal subjects: - kind: ServiceAccount name: kubernetes-dashboard namespace: kube-system --- # ------------------- Dashboard Deployment ------------------- # kind: Deployment apiVersion: apps/v1beta2 metadata: labels: k8s-app: kubernetes-dashboard name: kubernetes-dashboard namespace: kube-system spec: replicas: 1 revisionHistoryLimit: 10 selector: matchLabels: k8s-app: kubernetes-dashboard template: metadata: labels: k8s-app: kubernetes-dashboard spec: nodeSelector: node-role.kubernetes.io/master: "" containers: - name: kubernetes-dashboard image: registry.cn-hangzhou.aliyuncs.com/k8sth/kubernetes-dashboard-amd64:v1.8.3 ports: - containerPort: 8443 protocol: TCP args: - --auto-generate-certificates # Uncomment the following line to manually specify Kubernetes API server Host # If not specified, Dashboard will attempt to auto discover the API server and connect # to it. Uncomment only if the default does not work. # - --apiserver-host=http://my-address:port volumeMounts: - name: kubernetes-dashboard-certs mountPath: /certs # Create on-disk volume to store exec logs - mountPath: /tmp name: tmp-volume livenessProbe: httpGet: scheme: HTTPS path: / port: 8443 initialDelaySeconds: 30 timeoutSeconds: 30 volumes: - name: kubernetes-dashboard-certs secret: secretName: kubernetes-dashboard-certs - name: tmp-volume emptyDir: {} serviceAccountName: kubernetes-dashboard # Comment the following tolerations if Dashboard must not be deployed on master tolerations: - key: node-role.kubernetes.io/master effect: NoSchedule --- # ------------------- Dashboard Service ------------------- # kind: Service apiVersion: v1 metadata: labels: k8s-app: kubernetes-dashboard name: kubernetes-dashboard namespace: kube-system spec: type: NodePort ports: - port: 443 targetPort: 8443 nodePort: 30000 selector: k8s-app: kubernetes-dashboard --- apiVersion: v1 kind: ServiceAccount metadata: name: admin-user namespace: kube-system --- apiVersion: rbac.authorization.k8s.io/v1beta1 kind: ClusterRoleBinding metadata: name: admin-user roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: cluster-admin subjects: - kind: ServiceAccount name: admin-user namespace: kube-system
7:安装heapster
[root@node01 ~]# kubectl create -f kube-heapster/influxdb/ deployment.extensions "monitoring-grafana" created service "monitoring-grafana" created serviceaccount "heapster" created deployment.extensions "heapster" created service "heapster" created deployment.extensions "monitoring-influxdb" created service "monitoring-influxdb" created [root@node01 ~]# kubectl create -f kube-heapster/rbac/ clusterrolebinding.rbac.authorization.k8s.io "heapster" created [root@node01 ~]# kubectl get pods --all-namespaces NAMESPACE NAME READY STATUS RESTARTS AGE kube-system coredns-7997f8864c-4x7mg 1/1 Running 0 1h kube-system coredns-7997f8864c-zfcck 1/1 Running 0 1h kube-system heapster-647b89cd4b-wmvmw 1/1 Running 0 39s kube-system kube-apiserver-node01 1/1 Running 0 1h kube-system kube-controller-manager-node01 1/1 Running 0 1h kube-system kube-flannel-ds-hw2xb 1/1 Running 0 49m kube-system kube-proxy-s265b 1/1 Running 0 1h kube-system kube-scheduler-node01 1/1 Running 0 1h kube-system kubernetes-dashboard-7b44ff9b77-26fkj 1/1 Running 0 44m kube-system monitoring-grafana-74bdd98b7d-szvqg 1/1 Running 0 40s kube-system monitoring-influxdb-55bbd4b96-95tw7 1/1 Running 0 40s
访问https://192.168.150.181:30000/#!/login即可看到监控信息
heapster文件信息
[root@node01 ~]# tree kube-heapster/ kube-heapster/ ├── influxdb │ ├── grafana.yaml │ ├── heapster.yaml │ └── influxdb.yaml └── rbac └── heapster-rbac.yaml
grafana.yaml
apiVersion: extensions/v1beta1 kind: Deployment metadata: name: monitoring-grafana namespace: kube-system spec: replicas: 1 template: metadata: labels: task: monitoring k8s-app: grafana spec: nodeSelector: node-role.kubernetes.io/master: "" containers: - name: grafana image: registry.cn-hangzhou.aliyuncs.com/k8sth/heapster-grafana-amd64:v4.4.3 imagePullPolicy: IfNotPresent ports: - containerPort: 3000 protocol: TCP volumeMounts: - mountPath: /etc/ssl/certs name: ca-certificates readOnly: true - mountPath: /var name: grafana-storage env: - name: INFLUXDB_HOST value: monitoring-influxdb - name: GF_SERVER_HTTP_PORT value: "3000" # The following env variables are required to make Grafana accessible via # the kubernetes api-server proxy. On production clusters, we recommend # removing these env variables, setup auth for grafana, and expose the grafana # service using a LoadBalancer or a public IP. - name: GF_AUTH_BASIC_ENABLED value: "false" - name: GF_AUTH_ANONYMOUS_ENABLED value: "true" - name: GF_AUTH_ANONYMOUS_ORG_ROLE value: Admin - name: GF_SERVER_ROOT_URL # If you're only using the API Server proxy, set this value instead: # value: /api/v1/namespaces/kube-system/services/monitoring-grafana/proxy value: / volumes: - name: ca-certificates hostPath: path: /etc/ssl/certs - name: grafana-storage emptyDir: {} --- apiVersion: v1 kind: Service metadata: labels: # For use as a Cluster add-on (https://github.com/kubernetes/kubernetes/tree/master/cluster/addons) # If you are NOT using this as an addon, you should comment out this line. kubernetes.io/cluster-service: 'true' kubernetes.io/name: monitoring-grafana name: monitoring-grafana namespace: kube-system spec: # In a production setup, we recommend accessing Grafana through an external Loadbalancer # or through a public IP. # type: LoadBalancer # You could also use NodePort to expose the service at a randomly-generated port # type: NodePort ports: - port: 80 targetPort: 3000 selector: k8s-app: grafana
heapster.yaml
apiVersion: v1 kind: ServiceAccount metadata: name: heapster namespace: kube-system --- apiVersion: extensions/v1beta1 kind: Deployment metadata: name: heapster namespace: kube-system spec: replicas: 1 template: metadata: labels: task: monitoring k8s-app: heapster spec: serviceAccountName: heapster nodeSelector: node-role.kubernetes.io/master: "" containers: - name: heapster image: registry.cn-hangzhou.aliyuncs.com/k8sth/heapster-amd64:v1.4.2 imagePullPolicy: IfNotPresent command: - /heapster - --source=kubernetes:https://kubernetes.default - --sink=influxdb:http://monitoring-influxdb.kube-system.svc:8086 --- apiVersion: v1 kind: Service metadata: labels: task: monitoring # For use as a Cluster add-on (https://github.com/kubernetes/kubernetes/tree/master/cluster/addons) # If you are NOT using this as an addon, you should comment out this line. kubernetes.io/cluster-service: 'true' kubernetes.io/name: Heapster name: heapster namespace: kube-system spec: ports: - port: 80 targetPort: 8082 selector: k8s-app: heapster
influxdb.yaml
apiVersion: extensions/v1beta1 kind: Deployment metadata: name: monitoring-influxdb namespace: kube-system spec: replicas: 1 template: metadata: labels: task: monitoring k8s-app: influxdb spec: nodeSelector: node-role.kubernetes.io/master: "" containers: - name: influxdb image: registry.cn-hangzhou.aliyuncs.com/k8sth/heapster-influxdb-amd64:v1.3.3 imagePullPolicy: IfNotPresent volumeMounts: - mountPath: /data name: influxdb-storage volumes: - name: influxdb-storage emptyDir: {} --- apiVersion: v1 kind: Service metadata: labels: task: monitoring # For use as a Cluster add-on (https://github.com/kubernetes/kubernetes/tree/master/cluster/addons) # If you are NOT using this as an addon, you should comment out this line. kubernetes.io/cluster-service: 'true' kubernetes.io/name: monitoring-influxdb name: monitoring-influxdb namespace: kube-system spec: ports: - port: 8086 targetPort: 8086 selector: k8s-app: influxdb
heapster-rbac.yaml
kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: heapster roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:heapster subjects: - kind: ServiceAccount name: heapster namespace: kube-system
9:在node02和node03上面分别执行初始化
kubeadm init --config config.yaml #初始化的结果和node01的结果完全一样 mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config
10:查看节点信息
[root@node01 ~]# kubectl get nodes NAME STATUS ROLES AGE VERSION node01 Ready master 1h v1.10.0 node02 Ready master 1h v1.10.0 node03 Ready master 1h v1.10.0
[root@node01 ~]# kubectl get pods --all-namespaces -o wide NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE kube-system coredns-7997f8864c-lwtfl 1/1 Running 0 1h 10.244.2.2 node03 kube-system coredns-7997f8864c-q2z9d 1/1 Running 0 1h 10.244.2.3 node03 kube-system kube-apiserver-node01 1/1 Running 0 36m 192.168.150.181 node01 kube-system kube-apiserver-node02 1/1 Running 0 36m 192.168.150.182 node02 kube-system kube-apiserver-node03 1/1 Running 0 1h 192.168.150.183 node03 kube-system kube-controller-manager-node01 1/1 Running 0 36m 192.168.150.181 node01 kube-system kube-controller-manager-node02 1/1 Running 0 36m 192.168.150.182 node02 kube-system kube-controller-manager-node03 1/1 Running 0 1h 192.168.150.183 node03 kube-system kube-flannel-ds-2xrbm 1/1 Running 0 40m 192.168.150.181 node01 kube-system kube-flannel-ds-7gf89 1/1 Running 0 40m 192.168.150.182 node02 kube-system kube-flannel-ds-fmk5z 1/1 Running 0 40m 192.168.150.183 node03 kube-system kube-proxy-dj4c7 1/1 Running 0 1h 192.168.150.181 node01 kube-system kube-proxy-lsg47 1/1 Running 0 1h 192.168.150.183 node03 kube-system kube-proxy-s5wrf 1/1 Running 0 1h 192.168.150.182 node02 kube-system kube-scheduler-node01 1/1 Running 0 36m 192.168.150.181 node01 kube-system kube-scheduler-node02 1/1 Running 0 36m 192.168.150.182 node02 kube-system kube-scheduler-node03 1/1 Running 0 1h 192.168.150.183 node03
11:让master也运行pod(默认master不运行pod)
kubectl taint nodes --all node-role.kubernetes.io/master-
八:添加node04节点到集群
在node04节点执行如下命令,即可将节点添加进集群
kubeadm join 192.168.150.186:6443 --token b99a00.a144ef80536d4344 --discovery-token-ca-cert-hash sha256:f79b68fb698c92b9336474eb3bf184e847f967dc58a6296911892662b98b1315
[root@node01 ~]# kubectl get node NAME STATUS ROLES AGE VERSION node01 Ready master 45m v1.10.0 node02 Ready master 15m v1.10.0 node03 Ready master 14m v1.10.0 node04 Ready <none> 13m v1.10.0
参考文档:https://github.com/cookeem/kubeadm-ha/blob/master/README_CN.md
![](https://i-blog.csdnimg.cn/blog_migrate/7bc1433619c5e2221c1b6fa268363ae8.png)
![](https://i-blog.csdnimg.cn/blog_migrate/f67935ca1e2255d8fe559626d1dbc6d6.png)