H3C交换机配置堆叠（环形）举例

1.环形堆叠（如图)

2.配置交换机1
[SW1]irf member 1 priority 32（将master的优先级设置最大）
[SW1]int range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50（配置堆叠需要先将接口shutdown）
[SW1-if-range]shutdown
irf-port 1/1（前面数字1代表的是设备接口编号，后面的1代表的是逻辑接口编号）
port group interface Ten-GigabitEthernet1/0/49（将物理接口加入到逻辑堆叠口）
port group interface Ten-GigabitEthernet1/0/50
[SW1]int range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50（将接口取消shutdown）
[SW1-if-range]undo shutdown

[SW1]int range Ten-GigabitEthernet 1/0/51 to Ten-GigabitEthernet 1/0/52（配置堆叠需要先将接口shutdown）
[SW1-if-range]shutdown
irf-port 1/2（前面数字1代表的是设备接口编号，后面的1代表的是逻辑接口编号）
port group interface Ten-GigabitEthernet1/0/51（将物理接口加入到逻辑堆叠口）
port group interface Ten-GigabitEthernet1/0/52
[SW1]int range Ten-GigabitEthernet 1/0/51to Ten-GigabitEthernet 1/0/52（将接口取消shutdown）
[SW1-if-range]undo shutdown
[SW1]sa force(保存配置)
[SW1]irf-port-configuration active（激活堆叠配置）
3.配置交换机2
irf member 1 renumber 2（修改接口物理编号为2）
save force
reboot
int range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50
shutdown
quit
irf-port 2/1
port group interface Ten-GigabitEthernet2/0/51
port group interface Ten-GigabitEthernet2/0/52
quit
int range Ten-GigabitEthernet 2/0/51 to Ten-GigabitEthernet 2/0/52
shutdown
quit
irf-port 2/2
port group interface Ten-GigabitEthernet2/0/49
port group interface Ten-GigabitEthernet2/0/50
quit
int range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50
undo shutdown
quit
int range Ten-GigabitEthernet 2/0/51 to Ten-GigabitEthernet 2/0/52
undo shutdown
quit
save force
irf-port-conf active
4.配置交换机3
irf member 1 renumber 3（修改接口物理编号为3）
save force
reboot
int range Ten-GigabitEthernet 3/0/49 to Ten-GigabitEthernet 3/0/50
shutdown
quit
int range Ten-GigabitEthernet 3/0/51 to Ten-GigabitEthernet 3/0/52
shutdow
quit
irf-port 3/1
port group interface Ten-GigabitEthernet3/0/49
port group interface Ten-GigabitEthernet3/0/50
quit
irf-port 3/2
port group interface Ten-GigabitEthernet3/0/51
port group interface Ten-GigabitEthernet3/0/52
quit
int range Ten-GigabitEthernet 3/0/49 to Ten-GigabitEthernet 3/0/50
undo shutdown
quit
int range Ten-GigabitEthernet 3/0/51 to Ten-GigabitEthernet 3/0/52
undo shutdown
quit
save force
irf-port-conf active
配置交换机4
int range Ten-GigabitEthernet 4/0/49 to Ten-GigabitEthernet 4/0/50
shutdown
quit
int range Ten-GigabitEthernet 4/0/51 to Ten-GigabitEthernet 4/0/52
shutdown
quit
irf-port 4/1
port group interface Ten-GigabitEthernet4/0/51
port group interface Ten-GigabitEthernet4/0/52
quit
irf-port 4/2
port group interface Ten-GigabitEthernet4/0/49
port group interface Ten-GigabitEthernet4/0/50
quit
int range Ten-GigabitEthernet 4/0/49 to Ten-GigabitEthernet 4/0/50
undo shutdown
quit
int range Ten-GigabitEthernet 4/0/51 to Ten-GigabitEthernet 4/0/52
undo shutdown
quit
save force
irf-port-conf active
6.验证结果