windows dhcp服务器使用脚本批量创建作用域

本文链接：https://blog.csdn.net/a371933136/article/details/119327702

地址池设置									租期：天.小时:分钟:秒
Add-DhcpServerv4Scope -name "	地址池名称	" -StartRange	地址池起始地址	-EndRange	地址池结束地址	-SubnetMask	子网掩码	-State Active	-LeaseDuration 4.00:00:00
Add-DhcpServerv4Scope -name "	vlan10	" -StartRange	172.20.10.21	-EndRange	172.20.10.254	-SubnetMask	255.255.255.0	-State Active	-LeaseDuration 4.00:00:00

Add-DhcpServerv4Scope -name "vlan10" -StartRange 172.20.10.21 -EndRange 172.20.10.254 -SubnetMask 255.255.255.0 -State Active -LeaseDuration 4.00:00:00

网关设置
Set-DhcpServerv4OptionValue -OptionID 3 -Value	网关IP	-ScopeID	网络号
Set-DhcpServerv4OptionValue -OptionID 3 -Value	172.20.10.1	-ScopeID	172.20.10.0

Set-DhcpServerv4OptionValue -OptionID 3 -Value 172.20.10.1 -ScopeID 172.20.10.0

DNS设置
Set-DhcpServerv4OptionValue -DnsDomain	域名	-DnsServer	DNS服务器1,DNS服务器2	-ScopeId	网络号
Set-DhcpServerv4OptionValue -DnsDomain	free.com	-DnsServer	172.20.200.21,172.20.200.22	-ScopeId	172.20.10.0

Set-DhcpServerv4OptionValue -DnsDomain free.com -DnsServer 172.20.200.21,172.20.200.22 -ScopeId 172.20.10.0