首先我们要准备三台虚拟机
- 我们需要得到第一台的ip
[root@localhost ~]# ifconfig
ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.30.59.208 netmask 255.255.255.128 broadcast 10.30.59.255
inet6 fe80::aa37:469d:e48c:f70a prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:28:6a:08 txqueuelen 1000 (Ethernet)
RX packets 36865 bytes 18708557 (17.8 MiB)
RX errors 0 dropped 297 overruns 0 frame 0
TX packets 12269 bytes 924452 (902.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 132 bytes 10540 (10.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 132 bytes 10540 (10.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@localhost ~]# ifconfig ens192
ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.30.59.208 netmask 255.255.255.128 broadcast 10.30.59.255
inet6 fe80::aa37:469d:e48c:f70a prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:28:6a:08 txqueuelen 1000 (Ethernet)
RX packets 36885 bytes 18710073 (17.8 MiB)
RX errors 0 dropped 297 overruns 0 frame 0
TX packets 12281 bytes 926556 (904.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- 如果没有ifconfig命令 ;
[root@localhost ~]# yum -y install net-tools.x86_64
- 获取ip
[root@localhost ~]# ifconfig ens192 |awk 'NR==2{print $2}'
10.30.59.208
- 检测是否全部关闭
[root@localhost ~]# getenforce
Permissive
[root@localhost ~]# iptables -L
Chain INPUT (policy ACCEPT