http://www.xxx.com/ skipped. Content of size 67099 was truncated to 59363

最新推荐文章于 2022-12-26 16:51:08 发布
最新推荐文章于 2022-12-26 16:51:08 发布
阅读量10w+ 收藏
点赞数 1
分类专栏： nutch 文章标签： nutch java
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/aa346359669/article/details/84694741
版权
如果提示http://www.xxx.com/ skipped. Content of size 67099 was truncated to 59363
在nutch-site.xml中添加： 

<property> 
  <name>parser.skip.truncated</name> 
  <value>false</value> 
</property>

这是因为网站的页面内容采用truncate的方式分段返回，而nutch的默认设置是不处理这种方式的，需要打开之。
aa346359669
关注
  • 1
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
专栏目录
网络攻防中黑客藏用攻击手段：SSRF服务器端请求伪造，SSRF漏洞绕过IP限制，SSRF漏洞挖掘经验
代码讲故事
02-04 411
网络攻防中黑客藏用攻击手段：SSRF服务器端请求伪造，SSRF漏洞绕过IP限制，SSRF漏洞挖掘经验。 SSRF(服务端请求伪造)：是一种由攻击者构造形成由服务端发起请求的一个安全漏洞。 一般情况下，SSRF攻击的目标是从外网无法访问的内部系统。(正是因为它是由服务端发起的，所以它能够请求到与它相连而与外网隔离的内部系统） SSRF形成的原因：服务端提供了从其他服务器应用获取数据的功能且没有对目标地址做过滤与限制。 比如从指定URL地址获取网页文本内容，加载指定地址的图片，下载等等。利用的是服务
uhdd.sys源码
03-03
XMGR RDISK and UIDE DOS Device Drivers 1 Description XMGR RDISK and UIDE are a group of DOS device drivers for a PC system with an 80386+ CPU and using MS DOS V5 0+ or equivalent XMGR is a DOS driver which works as an "XMS manager" and provides up to 4 GB of XMS memory XMGR has direct support for V3 70+ UMBPCI by Uwe Sieber After UMBPCI enables upper memory XMGR loads there and will provide both upper and XMS memory to a DOS system XMGR uses an "I O Catcher" with UMBPCI Disk diskette I O above 640K is trapped by XMGR and done using a low memory area as UMBPCI "Shadow RAM" cannot do DMA XMGR also runs with JEMM386 or MS DOS EMM386 With EMM drivers XMGR using its B switch first boots in temporary space When upper memory gets enabled by the EMM driver XMGR loads there with no B copies all its boot data and takes over XMS work For a small XMS only system XMGR can also run entirely in low memory RDISK is a DOS RAM disk driver It creates a "fast" disk drive using 2 Megabytes to 2 GIGABYTES of XMS memory It loads as a system driver in CONFIG SYS or it can load later in AUTOEXEC BAT or by user command DOS can copy critical programs and data to the RAMdisk where they will be read or written at memory speed If loaded after CONFIG SYS RDISK files can be assigned to any free DOS drive letter using its : switch RDISK runs with V2 0 or V3 0 XMS managers 60 MB maximum for V2 0 XMS It uses only 656 to 752 bytes of upper memory depending on the system and it can also load in 640K DOS memory RDISK is a simple and small RAMdisk driver for use when resizing or other features are not needed UIDE is a DOS "Universal IDE" caching driver It intercepts "Int 13h" BIOS I O requests and caches data for up to 30 BIOS disks including A: or B: diskettes and including hard disks of any size UIDE can handle 48 bit LBA or 24 bit CHS I O calls by new or old DOS systems It will handle up to 10 "Legacy" or "Native PCI" IDE controllers UIDE "calls the BIOS" for diskettes and intercepts I O for "Int 13h" drivers loaded first thus UIDE caches ALL drives on a DOS system "ASPI" and other "non Int 13h" drivers are unsupported UIDE also detects and runs up to 8 SATA IDE and old "PIO mode" CD DVD drives It can cache CD DVD data and directories for MUCH greater speed and it will play audio CDs and handle "raw" trackwriter input audio and "raw" input is uncached UIDE caches 5 Megabytes to 4 GIGABYTES of data It can set up to four separate caches of its own "Common" User 1" "User 2" and "CD DVD" and it also permits caching requests from user drivers to "bring along" their OWN caches See the UIDE TXT file for full details UIDE uses 4816 bytes of upper DOS memory for 1 to 4 caches of any size All its data or cache tables use XMS memory A "stand alone" UIDE B switch no cache or diskettes can be used in test or diagnostic work and takes 3664 bytes of upper DOS memory If its N2 switch is given UIDE will omit all CD DVD logic saving 1744 bytes Its "CD DVD" cache can then become a 3rd user driver cache if needed UIDE"s H switch will load most of the driver into "free HMA" thus using only 928 bytes of memory 832 "stand alone" The small UHDD and UDVD2 drivers are also available for those who want only non caching drivers or a smaller size driver set for use on "boot" diskettes etc UHDD can cache 26 SATA IDE disks of any size on up to 10 controllers A: or B: diskettes included It now has all four UIDE caches takes 3280 bytes for caching and it can set a 1408 byte "stand alone" driver no cache with its B switch UHDD can put most of its code in HMA space with its H switch taking only 832 bytes 640 "stand alone" UDVD2 handles up to 6 SATA IDE or old PIO mode CD DVD drives it tests up to 10 controllers on loading and takes 2000 bytes or 144 with its H switch Caching by UHDD adds 96 bytes and UDVD2 "shares" UHDD"s I O buffer in XMS for input unsuited to UltraDMA If UHDD is not used UDVD2 will take 128K of XMS as its buffer or it handles such input in PIO mode if XMS is not available UHDD + UDVD2 require only 10K of disk file space and provide most UIDE features The small RDISKON COM program can "re enable" a DOS drive used by RDISK if a "format" command is accidentally issued to it This disables the drive on some systems Entering RDISKON L at a DOS command prompt where L is the desired drive letter A to Z will re enable the drive The small CC COM "Clear Cache" program can help verify files written by UIDE Entering CC at the DOS command prompt sends a BIOS "reset" to all disks making UIDE flush its "Common" cache Data from the disk NOT data still in cache can then be compared to the original output 2 NO Warranties XMGR RDISK and UIDE are offered at no cost "as is" "use at your own risk" and with NO warranties not even the implied warranty of FITNESS for any particular purpose nor of MERCHANTABILITY Driver questions and comments may be addressed to the E Mail of Johnson Lam <johnsonlam hk@gmail com> 3 Revision Summary 19 Oct 14 UHDD now "overlaps" cache work during UltraDMA disk output and the disk sector "gap" at I O end for greater speed UHDD M switch deleted 256 byte binary search buffer is now permanent Other drivers unchanged re dated only 27 Sep 14 UHDD now sets all 4 UIDE caches New UHDD M switch sets a 512 byte binary search buffer for more speed 26 Jan 14 UIDE error handling CD DVD media changes for "stand alone" mode is fixed UHDD offers "Common" & "CD DVD" caches 12 Jan 14 UIDE UD switch deleted many problems UIDE now offers "User 1" and "User 2" caches "Stand alone" UHDD UDVD2 re added for use as needed 12 Dec 13 UHDD UDVD2 deleted low use UIDE N2 dismisses CD DVD logic UIDE C switch added user caching improved 21 Nov 13 UHDD old style "stand alone" driver re added 14 Nov 13 UHDD UDVD2 "private" caches deleted unneeded and unused 25 Sep 13 BAD error fixed in UDVD2 re: locating UHDD MANY Thanks to Japheth for his tests and exact analysis 9 Sep 13 Possible but unlikely UHDD exit errors corrected UDVD2 UIDE now use all 32 CD DVD LBA bits in caching calls 2 Sep 13 Possible UDVD2 "media change" error fixed UHDD N1 size reduced 26 Aug 13 UHDD now has its "Common" cache and handles "private" user driver caches UDVD2 etc can now set a private cache 28 Jul 13 UHDD UIDE binary search buffer and F switch deleted 30 Apr 13 UHDD UDVD2 can now run without XMS lower speed for tests and FreeDOS "scripts" UDVD2 can now do "raw" input 15 Oct 12 UHDD UIDE again detect A: and B: diskettes from BIOS data NOT from "Int 13h" calls that FAIL with an LS 120 drive 2 Aug 12 UHDD "disk only" caching driver added UDVD2 caches CD DVD data if UHDD is also loaded UIDEJR deleted New UD switch in UDVD2 UIDE for CD DVD directory caching 9 Jul 12 UIDE UIDEJR device select error for master + slave CD DVD units on one IDE channel is corrected Many Thanks to Doug Beneway for finding this error 25 Jun 12 UIDE2 deleted: Not enough added speed complex to use 17 Jun 12 UIDE UIDE2 UIDEJR A switch init of 2 "Old IDE" channels and CD audio "Q" status data corrected Many Thanks to Japheth for his research and audio test program 29 May 12 UIDE and UIDE2 check for diskettes via Int 13h avoid DPTE tests if no PCI BIOS let the BIOS do I O for disks with bad DPTE data all re: VirtualBox BUGS 24 Feb 12 UIDE UIDE2 "64K DMA boundary error" fixed may affect only year 2000 chips or older 16 Oct 11 UIDE M switch deleted search buffer is always 512 bytes UIDE SYS back to 7 5K UIDE S dropped UIDE2 improved 7 Oct 11 All UIDE drivers updated to avoid BIOS "DPTE" ERRORS: Bad DPTE data for USB sticks Many Thanks to Daniel Nice 9 Sep 11 UIDE2 re added UIDE S and UIDE2 handle 6 CD DVD drives 22 Jul 11 UIDE E switch added for DOS emulators VirtualBox etc 20 May 11 UIDE S "short" UIDE added for systems with limited HMA 25 Apr 11 BAD "code mods" init error corrected for UIDE UIDEJR and RDISK XMGR not affected 5 Dec 10 UIDE UIDEJR R15 and R63 switches added to handle old DOS "games" Thanks Guillermo Grana Gomez 28 Nov 10 Minor updates: UIDEJR audio track number error corrected XMGR faster in protected mode Added XMGR and UIDE Z 15 Aug 10 UIDE audio track number error corrected Thanks Nagatoshi Uehara 10 Aug 10 UIDE binary search buffer added Using $ in CD DVD names fixed in UIDE UIDEJR Thanks Japheth 4 Jul 10 README file update XMGR UIDE can use "Native IDE" mode same as "Legacy" "Compatibility" for AHCI mainboards 28 Jun 10 XMGR updated for AHCI see the README sec 7 for details 10 Jun 10 UIDE now ignores "removable HARD disks" size reduced 16 Nov 09 UIDE now caches 4 GIGABYTES of data 6 Oct 09 UIDE and UIDEJR H requests HMA use "at the user"s risk" 2 Sep 09 README file updated FreeDOS users who desire full upper memory must omit UMBPCI and load JEMM386 JEMMEX only 23 Jun 09 RDISK now a COM file RDISK : switch RDISKON program added Corrected UIDE CD DVD handling of VDS errors 9 Jun 09 UIDE UIDEJR N3 switch added for no XMS memory Override of D: name by UIDE$ UIDEJR$ added for no CD DVD drives 15 May 09 Added RDISK 6 May 09 Added UIDEJR 1 May 09 Fixed XMGR "Port 92h" logic error Added XMGR PA and PN switches to control use of "Port 92h" 25 Apr 09 XMGR UIDE license and FreeDOS prohibition deleted drivers and sources are again available to all 4 Switch Options XMGR usually needs only its B switch if "booting" with an EMM driver All XMGR switch options are as follows: B Specifies "boot" mode XMGR loads in temporary memory until upper memory is enabled Without B XMGR loads stand alone in low memory or direct to upper memory with UMBPCI See the CONFIG SYS examples in section 5 Mn Specifies a temporary area for loading XMGR in "boot" mode or for UMBPCI upper memory I O before DOS posts a "workspace" buffer Values are: M1 64K M3 192K M5 320K M7 448K M2 128K M4 256K M6 384K M8 512K Without M M5 is assumed and the 320K area will be used NOTE: DOS systems may NOT load at address 0 and may leave temporary data anywhere in memory Mn helps to find a "safe" area for XMGR to use M is ignored if XMGR loads stand alone Nnn Specifies how many XMS "Handles" can be used by DOS programs The value nn may be 48 80 or 128 If N is omitted 48 "Handles" are used A big system doing much XMS work may need 80 or 128 "Handles" PA Specifies use or non use of PS 2 Port 92h logic to handle the PN system"s "A20" line PA indicates "Always" use Port 92h logic PN indicates "Never" use it and handle "A20" via normal keyboard port logic If P is omitted XMGR "asks the BIOS" if the system has Port 92h logic If not XMGR will use normal "A20" logic NOTE: If "A20" was enabled by DOS before XMGR loads XMGR does not handle it at all Tn Specifies the BIOS requests to use in getting extended memory as follows: T0 No "E820h" nor "E801h" requests T1 Memory list requests only Int 15h AX E820h T2 A dual area request only Int 15h AX E801h T3 "E820h" requests first then an "E801h" request T can usually be omitted causing T3 to be assumed In addition XMGR always uses an old 64 MB request to get T0 memory or if the requests denoted by T1 thru T3 are not successful Users may need to test T1 or T2 separately to see if their BIOS takes them A pre 1994 BIOS may not ignore T1 thru T3 correctly and may require T0 instead For old "QHIMEM" users T4 thru T7 may still be used and work the same as T0 thru T3 W Specifies use of the DOS "workspace" buffer for upper memory I O if loading with UMBPCI If W is omitted or if the DOS system does not have proper workspace logic XMGR sets its own buffer in low memory With PC DOS or EDR DOS W must be omitted Without UMBPCI W is ignored Z See Z for UIDE below RDISK uses only S size and : drive letter switches: Sn Specifies a desired RAM disk size in megabytes of XMS memory Values may be any number from 2 to 2047 S1024 or more creates a 1 to 2 GIGABYTE RAM disk If S is omitted or invalid a 25 MB RAM disk is created by default For old V2 0 XMS managers ROM DOS etc only S2 through S60 may be used See section 5 below for more details :L Specifies the DOS drive letter desired to access RDISK files L may be any available drive letter from A to Z e g :N assigns drive N: to all RDISK files If the drive letter is too high or already in use RDISK will abort and users may need "LASTDRIVE " in CONFIG SYS to set up more drives If RDISK is loaded by CONFIG SYS or if : is omitted the next free drive letter will be used UIDE usually needs only a H switch to use HMA space and a S switch to specify its cache size All UIDE switches are as follows: A Specifies ALTERNATE addressing for "legacy IDE" controllers The first legacy controller uses 01E8h 0168h addresses and a second if present uses 01F0h 0170h addresses A is only for "odd" mainboards with REVERSED addressing for the two legacy IDE controllers Without A the first legacy controller uses 01F0h 0170H and a second uses 01E8h 0168h as is normal for most PC mainboards B Requests a "basic" UltraDMA driver for disks and CDs DVDs no caching or diskette handling This may help for tests or diagnostics The B driver can request 128K of XMS as an UltraDMA I O buffer and it can load in the HMA The N2 switch can be given with B to "dismiss" all CD DVD logic Cnn Sets a separate "CD DVD" cache for higher CD DVD performance Values for nn are the same as for the S switch and permit up to 4 GB caches The "CD DVD" cache can be used by any user driver devices on systems with no SATA or IDE CD DVD drives If C is omitted data for requests addressed to the "CD DVD" cache shall go into UIDE"s "Common" cache D: Specifies the "device name" used by the CD DVD Redirector to access CD DVD drives For example: D:CDROM1 D:SANYO1 etc If D: is not given or the name following a D: is missing invalid UDVD1 is set by default If no CD DVD drives were found UIDE$ overrides any D: name for use with FreeDOS autoloader scripts E Makes the driver call the BIOS for any hard disk I O request E avoids setup trouble on some DOS emulators VirtualBox etc that do not emulate all PC hardware logic E also allows using hard disks on 1994 or older PCs which have no PCI EDD BIOS E still caches disk data unlike N1 that removes ALL disk support If B is given E is ignored NOTE Use of E on protected mode systems JEMM386 etc may run VERY slow Many BIOS programs omit DOS "VDS" support for hard disks and in protected mode they must do "PIO mode" transfers not UltraDMA If E is required a PC should be run in real mode UMBPCI etc whenever possible H Loads most of the driver in "free HMA" space UIDE will use only 928 bytes of upper DOS memory 832 when B is given H must not be used with ROM DOS which has no HMA NOTE MS DOS kernels have ERRORS in posting free HMA space which can give CRASHES Specifying H is "At the user"s risk" No such crashes are noted with other DOS systems also HMA usage by UIDE is under 4K bytes Users should still test a PC system before H is given for any serious tasks with these drivers N1 Requests NO hard disk handling by the driver N2 Requests NO CD DVD handling by the driver N2 will dismiss all CD DVD routines and save 1744 bytes N3 Requests no XMS memory N3 sets UIDE"s B "basic" driver N3 requires loading in low memory or UIDE aborts N3 can LOSE much speed as misaligned or other I O not suited to UltraDMA requires "calling the BIOS" for disks or using "PIO mode" for CD DVD drives N4 See Z below Q Awaits a "data request" before doing UltraDMA disk transfers Q is for "old" systems and may be used only if the driver loads O K but seems unable to transfer data Q must be OMITTED with SATA to IDE adapters from Sabrent and others since they may not emulate "data request" from SATA disks Q does not affect CD DVD drives R15 Sets the driver"s XMS memory at 16 or 64 MB R15 reserves R63 15 MB of XMS and R63 reserves 63 MB of XMS for DOS game programs that require XMS memory below 16 or 64 MB The drivers must be able to reserve this memory reserve their own XMS above that and "free" the 15 63 MB XMS If not the drivers display "XMS init error" and abort R15 or R63 need the drivers to load after the XMS manager XMGR HIMEMX etc so another driver cannot take any XMS first and the reserved XMS is just beyond the HMA See section 7 below for further details Snn Specifies the desired "Common" cache size in megabytes of XMS memory UIDE"s "Common" cache holds data for hard disks diskettes and CD DVD drives when C above is not given Values for S can be 5 15 25 40 50 or any number from 80 to 4093 S1024 and up sets a 1 to 4 GIGABYTE cache Suggested S values are Below 128 MB memory: Use S5 S15 S25 or S40 With 128 MB memory: Use S25 S40 S50 or S80 With 256 MB memory: Use S80 up to S127 With 512 MB memory: Use S160 up to S255 With 1 GB memory: Use S320 up to S511 With 2 GB memory: Use S640 up to S1023 With 4 GB memory: Use S1280 up to S3072 Small systems may prefer S25 or S50 which set 1600 cache blocks and are more efficient If S is omitted invalid an 80 MB cache is set Except for 25 or 50 values below 80 are cut to 40 15 or 5 MB The drivers display "XMS init error" and abort when not enough XMS memory is free If so a smaller cache must be requested For older V2 0 XMS managers ROM DOS etc only S5 to S50 may be used UX Disables all CD DVD UltraDMA even for drives that can do it "PIO mode" then handles all CD DVD I O Except for a few unusual drives by Sony etc which do not follow all ATAPI "rules" UX is rarely needed UX does not affect hard disks Xnn Sets a separate "User 1" cache for user drivers Values for nn are the same as for S above If X is omitted data for requests addressed to the "User 1" cache shall go into UIDE"s "Common" cache Ynn Sets a separate "User 2" cache for user drivers Values for nn are the same as for S above If Y is omitted data for requests addressed to the "User 2" cache shall go into UIDE"s "Common" cache Z For XMGR UIDE UHDD limits XMS moves to 2K byte sections not 64K when in protected mode Z is unneeded for JEMM386 JEMMEX MS DOS EMM386 or real mode UMBPCI If other EMM VCPI or DPMI drivers are used systems must be tested to see if Z is required BAD schemes that allow not enough interrupts during XMS moves can still be in use UIDE"s old N4 switch works the same and can still be used The "stand alone" UHDD ignores N4 or Z and will call the XMS manager to do its XMS moves UHDD usually needs only a H switch to load in HMA space also C S X or Y switches to specify cache sizes A summary of all UHDD switches is as follows: A Sets ALTERNATE addressing for "Legacy" IDE controllers same as UIDE A above Rarely necessary B Requests a 1408 byte "stand alone" driver no caching same as UIDE B above Cnn Sets a "CD DVD" cache size for UDVD2 use same values as for UIDE S above If C is omitted or invalid CD DVD data will go in UHDD"s "Common" cache E Makes the driver "call the BIOS" for hard disk I O requests same as UIDE E above E dismisses UltraDMA disk logic and saves 496 bytes H Loads all but 832 bytes of the driver 640 with B into HMA space See the note for UIDE H above Q Awaits "data request" before beginning UltraDMA I O with old controllers same as UIDE Q above Rarely necessary R15 Reserves 15 MB or 63 MB of XMS for old DOS "game" programs R63 same as UIDE R above Rarely necessary Snn Sets a "Common" cache size same values as UIDE S above Xnn Sets the "User 1" cache size same values for UIDE S above If X is omitted invalid "User 1" data will go in UHDD"s "Common" cache Ynn Sets the "User 2" cache size same values for UIDE S above If Y is omitted invalid "User 2" data will go in UHDD"s "Common" cache Z See Z above UDVD2 normally needs only a H switch to use HMA space and a D: switch to specify a driver "device name" A summary of all UDVD2 switches is as follows: A Sets ALTERNATE addressing for "Legacy" IDE controllers same as UIDE A above Rarely necessary D: Sets a "device name" used by the CD DVD Redirector to access CD DVD drives same as UIDE D: above H Puts all but 144 bytes of the driver in HMA space See the note for UIDE H above Rnn Reserves 15 MB or 63 MB of XMS for old DOS "game" programs same as UIDE R above Rarely necessary UX Disables CD DVD UltraDMA same as UIDE UX above Rarely necessary For all switches in each driver a dash may replace the slash and lower case letters may be used if desired 5 Setup and Configuration XMGR RDISK and UIDE are all loaded using the CONFIG SYS file Your CONFIG SYS should have command lines similar to the following examples: DEVICE C: DOSDVRS XMGR SYS N128 B DEVICEHIGH C: DRIVERS RDISK COM S500 DEVICEHIGH C: SYSTEM UIDE SYS D:TOSHIBA1 S511 H DEVICEHIGH C: USERDVRS UHDD SYS S500 C80 H DEVICEHIGH C: MYDVRS UDVD2 SYS D:BLURAY1 H Note that "Int 13h" BIOS drivers must be loaded first so UIDE UHDD can intercept and cache their DOS Int 13h calls Also note that any user drivers that call UIDE to do caching must be loaded after UIDE so they will "find" UIDE in memory and can "link" to it This also applies if UHDD followed by UDVD2 are used in place of UIDE See the CONFIG SYS examples below With V3 70+ UMBPCI and XMGR a "boot" procedure is not needed UMBPCI loads first to enable upper memory then XMGR loads to offer it and XMS to DOS then other drivers may load For V6 22 V7 10 MS DOS JEMM386 can also be loaded to offer extra upper memory in the "video graphics" areas or if other JEMM386 features are desired NOTE: FreeDOS and some other DOS variants will NOT "add up" the memory found by both UMBPCI and JEMM386 like MS DOS does FreeDOS users who want extra upper memory or other items must omit UMBPCI and load JEMMEX or HIMEMX JEMM386 per their instructions or load XMGR JEMM386 as shown in the 3rd example below An example CONFIG SYS file using V3 70+ UMBPCI and XMGR is as follows: SHELL C: DOS COMMAND COM C: DOS E:512 P DEVICE C: BIN UMBPCI SYS DEVICE C: BIN XMGR SYS W DOS HIGH UMB DEVICE C: BIN JEMM386 EXE I B000 B7FF X C800 EFFF NOEMS ;Optional Int 13h drivers cached by UIDE load now DEVICEHIGH C: BIN UIDE SYS D:CDROM1 S511 C250 H ;Or UHDD plus ; UDVD2 here User drivers that call UIDE load now DEVICEHIGH C: BIN RDISK COM S250 ;Optional Etc XMGR can be used "stand alone" on a small XMS only system It must be the first DOS system driver to load and it must load in LOW memory as in the following example: SHELL C: DOS COMMAND COM C: DOS E:512 P DEVICE C: BIN XMGR SYS DOS HIGH Int 13h drivers cached by UHDD load now DEVICE C: BIN UHDD SYS S80 C15 ;Or UIDE in place DEVICE C: BIN UDVD2 SYS ; of UHDD + UDVD2 User drivers that call UHDD load now DEVICE C: BIN RDISK COM S20 ;Optional Etc With JEMM386 and XMGR XMGR loads first in "boot" mode then JEMM386 and then XMGR finally loads in upper memory JEMMEX can also be used and if so XMGR can be omitted An example CONFIG SYS file which uses the XMGR "boot" procedure is shown below Note that in this example UIDE sets a 2 GIGABYTE disk cache plus a 700 Megabyte CD DVD cache SHELL C: DOS COMMAND COM C: DOS E:512 P DEVICE C: BIN XMGR SYS B ; B for "boot" DOS HIGH UMB DEVICE C: DOS JEMM386 EXE I B000 B7FF NOEMS ;Or JEMMEX here DEVICEHIGH C: BIN XMGR SYS ;No "boot" here Int 13h drivers cached by UIDE load now DEVICEHIGH C: BIN UIDE SYS D:MYDVD S2047 C700 H ;Or UHDD plus ; UDVD2 here User drivers that call UIDE load now DEVICEHIGH C: BIN RDISK COM S500 ;Optional Etc After the above drivers are loaded further CONFIG SYS drivers SETVER ANSI SYS etc can then load in any desired order When a specific RDISK drive letter is required RDISK can now be loaded by AUTOEXEC BAT and its : switch can specify any "free" drive letter e g :Q assigns drive Q: for RDISK files Whenever RDISK is used AUTOEXEC BAT should also include commands which copy all RDISK programs and data up to the RAM disk This is required each time DOS loads as XMS memory is LOST when a system shuts down Such copies usually take little time If RDISK and UIDE UHDD are used users must balance how much XMS memory the drivers use RDISK must take no more XMS than its files may need UIDE UHDD can take most remaining XMS for its caches Some XMS memory must be saved for other programs needing it As an example on a 4 GB system RDISK might use 500 MB UIDE UHDD might use 3 GB and 500 MB is free for other programs These values can be adjusted so RDISK holds programs and "fast" data files while UIDE UHDD cache "ordinary" files Properly balanced use of XMS will give a VERY high speed DOS system Please be sure to set each hard disk"s geometry correctly in your BIOS Set it to "Auto" "LBA" or "LBA Assisted" but NOT to "None" "Normal" "CHS" "ECHS" "User Cylinders Heads Sectors" "Revised ECHS" or "Bit Shift" should run but are NOT preferred If a BIOS has a setting like "UltraDMA" or "UDMA Capable" for a disk enable it "Laptop" power saving items like a "drive spin down timeout" should run O K but must be TESTED before use All these drivers allow 7 seconds for a disk or CD DVD drive to spin up after being idle More DRASTIC power saving items like a "drive SHUTDOWN timeout" may require "extra" logic to restart the drive should be DISABLED or driver I O requests may time out Also be sure to use an 80 connector cable for any UltraDMA drive using "mode 3" ATA 44 44 MB sec or higher When cabling a single drive to an IDE channel note that you MUST use both "ends" of the cable NOT an "end" and the middle connector This prevents ERRORS since an unused cable end can pick up "noise" like a RADIO antenna Be sure to enable all CD DVD drive s through the BIOS set up routines A drive that is "disabled" may cause the BIOS to clear all its UltraDMA flags and force the drive into "PIO mode" zero which is terribly SLOW 6 Error Reporting XMGR and UIDE UHDD UDVD2 will return normal XMS and CD DVD error codes as needed They are listed in the "V3 0 XMS Specification" and in the Microsoft "MS DOS CD ROM Extensions 2 1" document Both are available from Microsoft or from other Internet sources UIDE and UHDD work as "BIOS drivers" and return whichever codes are set for diskettes and hard disks handled by the BIOS For their SATA and IDE hard disks UIDE UHDD can post the following error codes: Code 0Fh DMA error CCh Disk is FAULTED 20h Controller busy E0h Hard I O error AAh Disk not ready FFh XMS memory error Many DOS programs display only "Disk Error" messages with NO code thus disk errors may require running a diagnostic to get better information 7 Technical Notes In all of the following notes "UIDE" also applies to UHDD or UDVD2 as necessary The JEMMEX or JEMM386 drivers are now recommended for use with UIDE if using a DOS system that needs their extra upper memory DPMI VCPI logic etc Other EMM drivers are essentially "abandoned" some with never corrected ERRORS and they should NOT be used The "VirtualBox" emulator as of 15 Oct 2012 does not set a "change line available" bit in BIOS byte 0:48Fh for A: and B: diskettes UIDE will IGNORE diskette drives without a "change line" normally 1985 or older as they cannot declare "media changes" i e a NEW diskette was loaded Until "VirtualBox" gets corrected UIDE will NOT run A: or B: diskettes in such an environment UIDE"s R15 or R63 switches DOS "game" programs are for a real mode system using UMBPCI and XMGR Game players like real mode as it gives more speed If protected mode JEMM386 EMM386 is desired UIDE using a R switch must load prior to the "EMM" driver so the XMS reserved by UIDE is just beyond the HMA If using UMBPCI XMGR UIDE and then an EMM driver this works fine But FreeDOS users and others whose DOS systems permit only one XMS provider i e UMBPCI cannot be used must load XMGR HIMEMX first UIDE second into low memory upper memory isn"t yet enabled then JEMM386 EMM386 last Using JEMMEX with UIDE and a R switch is unrecommended JEMMEX must load first and takes some XMS itself which pushes the reserved XMS above its intended 16 64 MB area and a few DOS "games" programs may CRASH UIDE shall NOT include any huge AHCI logic and will run hard disks in "Legacy" "Compatibility" "Native IDE" mode when using AHCI controllers If a "new" AHCI BIOS has no such settings UIDE with a E switch should be able to call the BIOS and use its logic to handle AHCI disks NOTE that much "DOS driver" code is now being omitted in AHCI BIOS programs Thus UIDE should be TESTED before normal use with an AHCI mainboard Also note that CD DVD drives are not supported by an AHCI BIOS for file I O only for "boot" CDs On a system whose AHCI chips can be set for "Legacy" "Compatibility" "Native IDE" mode CD DVD drives should be run from AHCI ports using such modes On mainboards with no such settings UIDE can run CD DVD drives only on the parallel IDE port 80 pin cable or IDE capable "add on" cards from Promise etc that UIDE can "detect" using normal PCI bus logic UIDE handles only "Legacy" or "Native PCI" IDE controllers RAID only chipsets Via VT6420 etc "port multiplier" chips and ADMA chipsets are not currently supported AHCI is supported only through "Legacy" "Compatiblity" or "Native IDE" controller settings or by UIDE "calling the BIOS" as noted above To use UIDE a mainboard BIOS must set SATA and IDE controllers to some form of "IDE" mode not RAID ADMA AHCI for best speed If no "Legacy" "Compatibility" "Native IDE" BIOS setting for disk controllers is provided a Sabrent converter card or similar will let UIDE handle SATA hard disks or CD DVD drives from the parallel port IDE controller channel using full UltraDMA speeds Except if necessary for AHCI it is NOT RECOMMENDED for UIDE to run any DOS disk using only the BIOS Many BIOS programs have no DOS "Virtual DMA" logic If so when an EMM driver JEMM386 etc enables its "V86 protected mode" the BIOS can do only PIO mode transfers and LOSES much speed If needed get SATA to IDE adapters for SATA disks as above or get "Int 13h" disk drivers for SCSI or other disk models UIDE can then handle such disks at full DMA speeds XMGR loads in UMBPCI upper memory BEFORE that memory is declared to the DOS system Memory displays using UMBPCI may not list XMGR since its memory is not part of the DOS memory lists Such memory displays will begin with a block having a 00A7h offset or greater if using 80 or 128 XMS "Handles" The upper memory skipped by this offset contains XMGR The UMBPCI upper memory manager uses system "Shadow RAM" that CANNOT do DMA Newer BIOS programs may use UltraDMA to load programs into upper memory If this is UMBPCI "Shadow RAM" a CRASH will occur To stop this and handle new BIOS programs users should follow these two RULES for running UMBPCI together with XMGR and UIDE UHDD: A The loading "order" for V3 70+ UMBPCI and XMGR shown in section 5 above MUST be used This lets the XMGR "I O Catcher" intercept and process upper memory disk I O until UIDE UHDD loads and takes over disk UltraDMA Old UMBPCI versions or other UMBPCI loading schemes are NOT recommended B When CHS I O is done MS DOS V6 22 or older every disk MUST have valid CHS parameters Otherwise UIDE UHDD and the "I O Catcher" let the BIOS deal with CHS I O If BIOS UltraDMA is not disabled a similar "Shadow RAM" CRASH will occur Some "CD ROM boot" programs handle the CD DVD as a "fake" hard disk and provide incorrect EDD BIOS data for it In scanning for disks to use UIDE may display "EDD BIOS error Unit ignored " then go on searching for more UltraDMA disks Users who did NOT "boot" from CD DVD need to see which disk was passed over and why Users who DID "boot" from CD DVD where all SATA UltraDMA disks were found may IGNORE this message It is caused by an ERROR in the "CD ROM boot" program NOT by a problem with UIDE or its SATA UltraDMA disks Some BIOS programs do not "configure" a mainboard controller if no user drives are on it An unconfigured controller causes UIDE to display "BAD controller" then it goes on looking for others to use If this message is displayed users should verify that each SATA UltraDMA drive was made "active" thru the BIOS set up logic If so "BAD controller" says a chip was not set to both "Bus Master" and "I O Space" modes and the BIOS should be UPDATED ">XMGR RDISK and UIDE DOS Device Drivers 1 Description XMGR RDISK and UIDE are a group of DOS device drivers for a PC system with an 80386+ CPU and using MS DOS V5 0+ or equivalent XMGR is a DOS driver w [更多]
xxx.rar_comxxx_xxx网_俄罗斯 XXX_俄罗斯XXX视频_俄罗斯免费xxx
09-23
使用vs2008编写的俄罗斯方块，每一步头文件跟关键函数的添加都有详细描写
parcel-plugin-zip:一个将zip dist打包到dist.zip的包裹插件
05-01
@vmo-fed/parcel-plugin-zip 将dist压缩为dist.zip的parcel插件 使用 npm i @vmo-fed/parcel-plugin-zip -D package.json ... "scripts": { "build": "NODE_ENV=production parcel build app/index.html" } ... 运行 npm run build # 结束后会在根目录下生成dist.zip todo 支持Mac 支持windows
wwwxxx域名选择(www.xxx.com或者.cn)
计算机毕业论文源码，学生个人网页制作html源码。贴近用户做网络推广和互联网优化。
12-26 46万+
域名就是网站的网址，就跟家庭住址一样，那么域名就是我们网站的地址，我们使用方便记忆的域名（字母/数字+.COM等域名后缀:www.xxx.com）。 按所属机构分常见后缀形式： COM：商业性的机构/公司/个人，因为COM这个后缀公信度高，所以用得比较多 ORG ：非盈利的组织、团体 GOV：政府部门 NET：从事Internet相关的的机构或公司 EDU：教育机构 .互联网通用顶级域之一，主要供教育机构，如大学等院校使用，实际使用的教育机构大部分位于美国。 注意：还有很多，但是不常见，就先不
自动化执行-钉钉机器人通知.pdf
03-07
⾃动化执⾏ ⾃动化执⾏-钉钉机器⼈通知 钉钉机器⼈通知 背景 背景 公司内部⽤钉钉来办公，钉钉⽀持机器⼈提醒，有各种各样的机器⼈提供选择，可以根据需求来定制机器⼈，达到提醒功能，如提醒某⼈请下午茶，233 思路 思路 1. 添加机器⼈到群组中，这次将的是"⾃定义"机器⼈； 2. 添加后会发现有⼀个webhook的链接，可以点击"设置说明"查看详情 3. 可以通过post请求⽹这个webhook发送信息，机器⼈就可以在群⾥展⽰信息，⽂档⾥有定义不同的请求body； 　⽂档地址：https://open-doc.dingtalk.com/docs/doc.htm?spm=a219a.7629140.0.0.karFPe&treeId=257&articleId=105735&docType=1 　这⾥需要吐槽的⼀点，⽬前只发现text类型⽀持换⾏ 4. 关键就是post请求⾥⾯的信息的填充，如果想到⽤python来处理； 5. 编写python脚本：⼤致思路就是解析⾃动化result⽂件，组装post请求 　实际代码如下： 　　 import requests import time import json import sys import hashlib import xml.dom.minidom HEADERS = {'ua': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/44.0.2403.125 Safari/537.36'} DINGDING_URL= 'https://oapi.dingtalk.com/robot/send?access_token=your_access_token' RESULT_FILE= '/var/lib/jenkins/workspace/wm-api-autotest/target/surefire-reports/testng-results.xml' REPORT_URL_FILE= '/var/lib/jenkins/workspace/wm-api-autotest/target/allure-results/executor.json' class Message(): def __init__(self): self.total=0; self.passed=0; self.failed=0; self.skipped=0; self.reportUrl=""; #解析⽂件获取结果数据 def analyze(self): #打开xml⽂档 dom = xml.dom.minidom.parse(RESULT_FILE) #得到⽂档元素对象 root = dom.documentElement self.total = root.getAttribute('total') self.passed = root.getAttribute('passed') self.failed = root.getAttribute('failed') self.skipped = root.getAttribute('skipped') #构建的次数统计在json⽂件中 file = open(REPORT_URL_FILE,'r') self.reportUrl=json.load(file)['reportUrl'] #发送报告 def send_message_to_robot(self): url= DINGDING_URL message='wm-api⾃动化执⾏结果:\n本次执⾏了{}条⽤例;\n成功了{}条;\n失败了{}条;\n跳过了{}条;\n查看详情请点击=> {}'.format(self.total,self.passed,self.failed,self.skipped,self.reportUrl) data={"msgtype":"text","text":{"content":message,"title":"wm-api⾃动化结果通知"}} try: resp = requests.post(url,headers=HEADERS,json=data,timeout=(3,60)) except: print ("Send Message is fail!"); if __name__ == '__main__': message = Message() message.analyze(); message.send_message_to_robot(); 6. jenkins设置，需要新增⼀个插件"Post build task"
java.net.UnknownHostException: www.xxx.com: Name or service not known的某种情况
九尾狐的yi巴的博客
01-05 60万+
我一般只记录不是网上给出的大众答案。 很明显很多人搜到的结论是： 修改服务器hosts文件： vi/etc/hosts 添加记录行： 127.0.0.1 www.xxx.com 这只是把这个无法识别的域名映射到本地了，有点掩耳盗铃。我是真的需要访问这个www.xxx.com提供的接口，所以不能用改host解决。 搜到的别的奇形怪状的解释我就不提了，我这里出现的问题是： 这个www.xxx.com的接口提供者要求使用https访问，并且给了我两个证书：Intermediate.crt和Roo...
xxx.com和www.xxx.com的区别
weixin_42613703的博客
12-22 62万+
XXX.com 是主域名！ WWW.xxx.com 一般是域名的主页！ 在很多情况下，会配置成一样！！！ 也有可能，主域名不配置到具体的IP，可能无法解析。。 C:\Windows\system32&gt;nslookup baidu.com 服务器: UnKnown Address: 61.128.114.133 非权威应答: 名称: baidu.com Addresses: 22...
在网址上输入www.xxx.com到返回界面给用户发生了什么？
weixin_51287642的博客
08-06 18万+
在网址上输入www.xxx.com到返回界面给用户发生了什么？ DNS域名解析（https://blog.csdn.net/yanshuanche3765/article/details/82589210）–>tcp三次握手建立连接（https://blog.csdn.net/xy010902100449/article/details/48274635）–>向服务器发送http请求，请求html文件–>服务器返回一个html文件–>tcp四次握手释放连接–>游览器解释html
Fatal error: require(): Failed opening required ‘/www/wwwroot/xxxxxx/public/../thinkphp/start.php
热门推荐
WYXXXXXXXXX的博客
10-13 300万+
项目场景： 在CentOS8中安装了宝塔，配置thinkphp5.1版本环境时出了问题，在此之前网站虚拟域名成功配置，能够访问站点创建成功的页面 问题描述： 在访问tp5默认页面时报错 Warning: require(): open_basedir restriction in effect. File(/home/wwwroot/xxxxxx/thinkphp/start.php) is not within the allowed path(s): (/home/wwwroot/xxxxxx/pub
nginx对于XXX.com和XXX.com/index给映射到www.xxx.com的方式
fhb19870610的专栏
05-15 27万+
location / {             root    C:/website;             index   index.html index.htm index.php;             include C:/website/.htaccess; if ($host !~ "www.xincanzs.com") { rewrite
libzip-devel-0.10.1-8.el7.x86_64.rpm
01-13
官方离线安装包，测试可用。使用rpm -ivh [rpm完整包名] 进行安装
微服务完整解决方案Armada.zip
07-18
Armada 是微服务开发，部署，配置和发现的一个完整解决方案。Armada 不仅仅是个工具，而且定义了面向服务的转换和良好实践。构建：john@desktop$ armada build chat-service Pulling repository dockyard.armada.sh/microservice_python ...(skipped)... Successfully built 3be42e99ca6a john@desktop$ armada push chat-service Pushing microservice chat-service to dockyard: dockyard.initech.com... ...(skipped)... Image has been pushed.运行：admin@initech$ armada run chat-service --env production-aws Running microservice chat-service from dockyard: dockyard.initech.com locally... Service is running in container fc6776c8f6da available at addresses:   192.168.1.43:49272 (80/tcp)   192.168.1.43:49271 (22/tcp)使用：greg@ubuntu$ curl -X POST http://chat-service.initech.com/channel/chitchat -d '{"nick":"Greg","text":"Hello all!"}' {     "ok": true } 标签：微服务框架
嵌入式系统/ARM技术中的使用RealViewMDK时常见的问题（2）
11-12
作者：赵明，华清远见嵌入式学院讲师。 　　在你使用RealViewMDK下载程序的时候有遇到过类似于如下的错误信息吗？ 　　Load "D:\\david\\project\\farsight\\LED_UART\\obj\\led_test.AXF" 　　No Algorithm found for: 30000000H - 300041EFH 　　Erase skipped! 　　此时也会弹出“Error:Flash Download failed – ARM920T”的错误对话框。 　　从错误信息中，可以看到RV要找以0x30000000开头的地址空间的Flash下载
[麻省理工学院-算法导论].Introduction.to.Algorithms,.Second.Edition
09-08
This part will get you started in thinking about designing and analyzing algorithms. It is intended to be a gentle introduction to how we specify algorithms, some of the design strategies we will use throughout this book, and many of the fundamental ideas used in algorithm analysis. Later parts of this book will build upon this base. Chapter 1 is an overview of algorithms and their place in modern computing systems. This chapter defines what an algorithm is and lists some examples. It also makes a case that algorithms are a technology, just as are fast hardware, graphical user interfaces, object-oriented systems, and networks. In Chapter 2, we see our first algorithms, which solve the problem of sorting a sequence of n numbers. They are written in a pseudocode which, although not directly translatable to any conventional programming language, conveys the structure of the algorithm clearly enough that a competent programmer can implement it in the language of his choice. The sorting algorithms we examine are insertion sort, which uses an incremental approach, and merge sort, which uses a recursive technique known as "divide and conquer." Although the time each requires increases with the value of n, the rate of increase differs between the two algorithms. We determine these running times in Chapter 2, and we develop a useful notation to express them. Chapter 3 precisely defines this notation, which we call asymptotic notation. It starts by defining several asymptotic notations, which we use for bounding algorithm running times from above and/or below. The rest of Chapter 3 is primarily a presentation of mathematical notation. Its purpose is more to ensure that your use of notation matches that in this book than to teach you new mathematical concepts. Chapter 4 delves further into the divide-and-conquer method introduced in Chapter 2. In particular, Chapter 4 contains methods for solving recurrences, which are useful for describing the running times of recursive algorithms. One powerful technique is the "master method," which can be used to solve recurrences that arise from divide-and-conquer algorithms. Much of Chapter 4 is devoted to proving the correctness of the master method, though this proof may be skipped without harm. Chapter 5 introduces probabilistic analysis and randomized algorithms. We typically use probabilistic analysis to determine the running time of an algorithm in cases in which, due to the presence of an inherent probability distribution, the running time may differ on different inputs of the same size. In some cases, we assume that the inputs conform to a known probability distribution, so that we are averaging the running time over all possible inputs. In other cases, the probability distribution comes not from the inputs but from random choices made during the course of the algorithm. An algorithm whose behavior is determined not only by its input but by the values produced by a random-number generator is a randomized algorithm. We can use randomized algorithms to enforce a probability distribution on the inputs-thereby ensuring that no particular input always causes poor performance-or even to bound the error rate of algorithms that are allowed to produce incorrect results on a limited basis. Appendices A-C contain other mathematical material that you will find helpful as you read this book. You are likely to have seen much of the material in the appendix chapters before having read this book (although the specific notational conventions we use may differ in some cases from what you have seen in the past), and so you should think of the Appendices as reference material. On the other hand, you probably have not already seen most of the material in Part I. All the chapters in Part I and the Appendices are written with a tutorial flavor.
Net: Board Net Initialization Failed No ethernet found.解决方案
02-22
Net: Board Net Initialization Failed No ethernet found.解决方案，如实际开发中有遇到，仅供参考 1. 网卡没有插好或者网卡损坏。 2. 网卡的驱动程序没有正确加载。 3. 网线没有接好或者网线损坏。 4. 网络设备没有正确配置。 5. 网络环境不稳定。 u-boot.bin下载软件：imxdownload使用： chmod 777 imxdownload #给予imxdownload可执行权限 ./imxdownload u-boot.bin /dev/sdd #烧写到SD卡中
dbl-oisd-nl：abp.oisd.nl | 互联网的＃1域阻止列表（镜像）
02-09
_(____/ b l o c k l i s t b y s j h g v r since august 2018Designed to be set-it and forget-itUse it, love it误报 :fire: ||积木广告，（移动）应用程序广告，网络钓鱼，恶意广告，恶意软件，间谍软件，勒索...
jmespath.php：在PHP中以声明方式指定如何从JSON文档中提取元素
02-25
JMESPath（发音为“ jaymz路径”）允许您声明性地指定如何从JSON文档中提取元素。... ... $ expression = 'foo.*.baz' ; $ data = [ 'foo' => [ 'bar' => [ 'baz' => 1 ], 'bam' => [ 'baz' => 2 ], ...
parkinglot-api:在Koa.js中开发的parkinglot API
05-09
./setup.sh 这将安装以下内容： 码头工人nvm，节点和npm 您还需要mysql 5.7，以手动安装所有这些程序，您可以按照以下步骤操作：如果您不使用MySQL的默认配置，您将需要更新数据库的配置和测试的配置。 请在mysql中...
TLD skipped. URI: http://java.sun.com/jstl/core_rt is already defined
最新发布
04-04
I'm sorry, as an AI language model, I cannot perform the action or provide a solution for the error message you have provided without additional context or information about the problem you are facing. Can you please provide more details about the issue you are experiencing?

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值