在4个KVM虚机上用sealos安装k8s

1，https://www.sealyun.com/instructions

2， 4台KVM虚机

192.168.122.210 nodel

192.168.122.22 node2

192.168.122.83 node3

192.168.122.128 node4

 

3， 之前的准备

virt-install --name=nodel --memory=1024,maxmemory=2048 --vcpus=1,maxvcpus=2 --os-type=linux --os-variant=centos7.0 --location=/root/CentOS-7-x86_64-Minimal-2009.iso

--disk path=/tmp/Centos7-Minimal-2-2004.32 --network default,model=virtio --graphics=vnc --console=pty,target_type=serial --extra-args="console=tty0 console=ttyS0"

 

用 安装的磁盘文件 创建虚机

 

virt-install --name=node2 --memory=1024,maxmemory=2048 --vcpus=1,maxvcpus=2 --os-type=linux --os-variant=centos7.0 --disk path=/tmp/Centos7-Minimal-2-2004.32.1 --network default,model=virtio        --graphics=vnc --console=pty,target_type=serial   --boot hd

 

 virt-install --name=node3 --memory=1024,maxmemory=2048 --vcpus=1,maxvcpus=2 --os-type=linux --os-variant=centos7.0 --disk path=/tmp/Centos7-Minimal-2-2004.32.2 --network default,model=virtio        --graphics=vnc --console=pty,target_type=serial   --boot hd

 

 virt-install --name=node4 --memory=1024,maxmemory=2048 --vcpus=1,maxvcpus=2 --os-type=linux --os-variant=centos7.0 --disk path=/tmp/Centos7-Minimal-2-2004.32.3 --network default,model=virtio        --graphics=vnc --console=pty,target_type=serial   --boot hd  

 

用 这个命令安装1个 dhcp 的虚机

 

（由于我的疏忽，node1 写成nodel）

可以用virsh console 7进入界面安装

 

wget http://mirrors.neusoft.edu.cn/centos/7.9.2009/isos/x86_64/CentOS-7-x86_64-Minimal-2009.iso 

qemu-img create -f qcow2 /tmp/Centos7-Minimal-2-2004.32 32G

 

修改虚机内存大小

virsh setmaxmem nodel 4194304 要虚机关闭

virsh start nodel

virsh setmem nodel 4194304  要虚机开启

4194304 =4G

 

wget -c https://sealyun.oss-cn-beijing.aliyuncs.com/latest/sealos && \
    chmod +x sealos && mv sealos /usr/bin

 

sealos init --passwd ****** \

--master 192.168.122.210  --master 192.168.122.22  --master 192.168.122.83  \

--node 192.168.122.128 \

--pkg-url /root/kube1.18.0.tar.gz \

--version v1.18.0

 

最后完成

 

 

     ___           ___           ___           ___       ___           ___

    /\  \         /\  \         /\  \         /\__\     /\  \         /\  \

   /::\  \       /::\  \       /::\  \       /:/  /    /::\  \       /::\  \

  /:/\ \  \     /:/\:\  \     /:/\:\  \     /:/  /    /:/\:\  \     /:/\ \  \

 _\:\~\ \  \   /::\~\:\  \   /::\~\:\  \   /:/  /    /:/  \:\  \   _\:\~\ \  \

/\ \:\ \ \__\ /:/\:\ \:\__\ /:/\:\ \:\__\ /:/__/    /:/__/ \:\__\ /\ \:\ \ \__\

\:\ \:\ \/__/ \:\~\:\ \/__/ \/__\:\/:/  / \:\  \    \:\  \ /:/  / \:\ \:\ \/__/

 \:\ \:\__\    \:\ \:\__\        \::/  /   \:\  \    \:\  /:/  /   \:\ \:\__\

  \:\/:/  /     \:\ \/__/        /:/  /     \:\  \    \:\/:/  /     \:\/:/  /

   \::/  /       \:\__\         /:/  /       \:\__\    \::/  /       \::/  /

    \/__/         \/__/         \/__/         \/__/     \/__/         \/__/

                 官方文档：sealyun.com

                 项目地址：github.com/fanux/sealos

                 QQ群   ：98488045

                 常见问题：sealyun.com/faq

[root@node1 ~]# kubectl get nodes

NAME    STATUS   ROLES    AGE     VERSION

node1   Ready    master   4m48s   v1.18.0

node2   Ready    master   4m15s   v1.18.0

node3   Ready    master   4m14s   v1.18.0

node4   Ready    <none>   3m19s   v1.18.0

 

wget https://github.com/projectcalico/calicoctl/releases/download/v3.17.0/calicoctl-linux-amd64 

 

[root@node1 ~]# chmod +x  ./calicoctl-linux-amd64

[root@node1 ~]# install calicoctl-linux-amd64 /usr/bin/calicoctl

[root@node1 ~]# calictl node status

-bash: calictl: command not found

[root@node1 ~]# calicoctl node status

Calico process is not running.

[root@node1 ~]# mkdir /etc/calico

[root@node1 ~]# vi /etc/calico/calicoctl.cfg

[root@node1 ~]# ECTD_ENDPOINTS=https://node1:2379 calicoctl node status

Calico process is not running.

[root@node1 ~]# export CALICO_DATASTORE_TYPE=kubernetes

[root@node1 ~]# export CALICO_KUBECONFIG=~/.kube/config

[root@node1 ~]# calicoctl get workloadendpoints

WORKLOAD                NODE    NETWORKS            INTERFACE

nginx-f89759699-2zxxq   node4   100.127.10.71/32    cali4d92a499c78

nginx-f89759699-6bqzh   node4   100.127.10.72/32    cali9e8f9b89543

nginx-f89759699-7z2t2   node4   100.127.10.69/32    cali7c6ac0b1a01

nginx-f89759699-9gw7t   node1   100.66.209.196/32   cali9a673ead28d

nginx-f89759699-b928w   node1   100.66.209.197/32   cali6bb50727eb6

nginx-f89759699-bshmw   node4   100.127.10.66/32    calie067f71a8eb

nginx-f89759699-bsmdl   node3   100.74.135.1/32     calie40a1fbc812

nginx-f89759699-fsvzr   node2   100.108.11.193/32   calif2c10ab0336

nginx-f89759699-lqtmr   node4   100.127.10.70/32    cali3d6176642f1

nginx-f89759699-m4tpt   node4   100.127.10.68/32    cali51ecbce8ed1

nginx-f89759699-nxfzz   node1   100.66.209.195/32   califa13f1809e7

nginx-f89759699-vlfql   node4   100.127.10.65/32    cali14a6cb188eb

nginx-f89759699-z28jf   node4   100.127.10.67/32    calid624ce3a967

[root@node1 ~]# DATASTORE_TYPE=kubernetes KUBECONFIG=~/.kube/config calicoctl get nodes

NAME

node1

node2

node3

node4

[root@node1 ~]# DATASTORE_TYPE=kubernetes KUBECONFIG=~/.kube/config calicoctl get bgppeer

NAME   PEERIP   NODE   ASN

[root@node1 ~]# DATASTORE_TYPE=kubernetes KUBECONFIG=~/.kube/config calicoctl get ipPool -o yaml

apiVersion: projectcalico.org/v3

items:

- apiVersion: projectcalico.org/v3

 kind: IPPool

 metadata:

   creationTimestamp: "2020-12-08T16:45:31Z"

   name: default-ipv4-ippool

   resourceVersion: "513"

   uid: 55da9135-48fd-4543-a082-7cf799ebe96f

 spec:

   blockSize: 26

   cidr: 100.64.0.0/10

   ipipMode: Always

   natOutgoing: true

   nodeSelector: all()

   vxlanMode: Never

kind: IPPoolList

metadata:

 resourceVersion: "6861"

 

 

[root@node1 ~]# kubectl exec -it calico-node-4hssf -n kube-system  --sh

Error: unknown flag: --sh

See 'kubectl exec --help' for usage.

[root@node1 ~]# kubectl exec -it calico-node-4hssf -n kube-system  --bash

Error: unknown flag: --bash

See 'kubectl exec --help' for usage.

[root@node1 ~]# kubectl exec -it calico-node-4hssf -n kube-system  sh

kubectl exec [POD] [COMMAND] is DEPRECATED and will be removed in a future version. Use kubectl kubectl exec [POD] -- [COMMAND] instead.

#  ps

 PID TTY          TIME CMD

3209 pts/0    00:00:00 sh

3218 pts/0    00:00:00 ps

# ps aux | grep calico

root        64  1.1  0.7 143268 30524 ?        Sl   16:46   0:27 calico-node -felix

root        65  0.0  0.6 143268 24328 ?        Sl   16:46   0:00 calico-node -confd

root       135  0.0  0.0    760   260 ?        S    16:46   0:00 bird6 -R -s /var/run/calico/bird6.ctl -d -c /etc/calico/confd/config/bird6.cfg

root       136  0.0  0.0    820   524 ?        S    16:46   0:00 bird -R -s /var/run/calico/bird.ctl -d -c /etc/calico/confd/config/bird.cfg

root      3238  0.0  0.0   3072   716 pts/0    S+   17:24   0:00 grep calico

# ps aux | grep bird

root        60  0.0  0.0   2148   372 ?        Ss   16:46   0:00 runsv bird

root        61  0.0  0.0   2148   376 ?        Ss   16:46   0:00 runsv bird6

root       135  0.0  0.0    760   260 ?        S    16:46   0:00 bird6 -R -s /var/run/calico/bird6.ctl -d -c /etc/calico/confd/config/bird6.cfg

root       136  0.0  0.0    820   524 ?        S    16:46   0:00 bird -R -s /var/run/calico/bird.ctl -d -c /etc/calico/confd/config/bird.cfg

root      3252  0.0  0.0   3072   716 pts/0    S+   17:24   0:00 grep bird

#