- 博客(2)
- 资源 (8)
- 收藏
- 关注
RSS订阅转载 linux中断下半部分
中断处理程序运行在中断上下文中,所以不允许被抢占,所以执行时间应该越短越好,但有时中断处理程序还需要做很多工作,为了两点都满足,所以一般我们把中断处理切为两个部分:上半部(top half)和下半部(bottom half).上半部:接收到一个中断,它就立即开始执行,但只做有严格时限的工作.例如对接收的中断进行应答或者复位硬件,这些工作都是在所有中断被禁止的情况下完成的.下半部:能够被允许
2012-06-27 16:25:49
3770
转载 LCD的连接方式
http://www.rosoo.net/a/201101/10803.html目前一般彩色LCD的连接方式有这么几种：MCU模式，RGB模式，SPI模式，VSYNC模式，MDDI模式等。1.MCU模式:目前最常用的连接模式，一般是8080模式和6800模式，这个主要是时序的区别。（68系统已经不存在了）。会解码命令，由 timing generator 产生时序信号，驱动 COM 和
2012-06-18 17:48:38
2194
ARM® Architecture Reference Manual ARMv7-A and ARMv7-R edition
ARM® Architecture Reference Manual
ARMv7-A and ARMv7-R edition
2018-06-15
Bare-metal Boot Code for ARMv8-A Processors
Hardware verification engineers often run bare-metal tests to verify core-related function in a System on Chip (SoC). However, it can be challenging to write boot code for a bare-metal system, without a basic understanding of software development on the ARM architecture.
This application note provides code examples for the following important operations that are involved in booting a bare-metal system:
• Initializing exceptions.
• Initializing registers.
• Configuring the MMU and caches.
• Enabling NEON and Floating Point.
• Changing Exception levels.
The code examples are written with the GNU assembly grammar and are tested on the Cortex-A53, Cortex-A72, and Cortex-A73 processors. They also apply to other ARMv8-A processors.
2018-05-29
ARM Generic Interrupt Controller Architecture Specification (3.0 & 4.0)
ARM Generic Interrupt Controller Architecture Specification (GIC architecture version 3.0 and version 4.0)
2018-05-04
Brief Introduction to MIPS32 Shadow Registers
Brief Introduction to MIPS32 Core Shadow Registers for Microcontroller Applications
2011-10-10
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人