Solaris 11常用命令

1.网络

netstat -rn
# 显示路由
ipadm show-addr
root@hn01:~# ipadm show-addr
ADDROBJ           TYPE     STATE        ADDR
lo0/v4            static   ok           127.0.0.1/8
net2/a172a22a22a29 static  ok           172.22.22.29/24
net2/a172a22a22a33 static  ok           172.22.22.33/16
net2/a172a22a22a31 static  ok           172.22.22.31/16
net2/a172a22a22a34 static  ok           172.22.22.34/16
net2/a172a22a22a35 static  ok           172.22.22.35/16
net2/a172a22a22a36 static  ok           172.22.22.36/16
net3/acme         static   ok           192.168.100.100/24
lo0/v6            static   ok           ::1/128

# 查看网络及子接口信息
ifconfig -a4
# 
ipadm delete-addr net2
# 删除网口配置
ipadm create-addr -T static -a 172.22.22.27/24 net2

root@hn01:~# ipadm create-addr -T static -a 172.22.22.27/24 net2
net2/v4
# 添加网口配置

ipadm create-addr -T static -a 172.22.22.220/24 net2/network01
# 也可以指定子接口名字
root@hn01:~# ipadm show-addr 
ADDROBJ           TYPE     STATE        ADDR
lo0/v4            static   ok           127.0.0.1/8
net2/v4           static   ok           172.22.22.27/24
net2/a172a22a22a29 static  ok           172.22.22.29/24
net2/a172a22a22a33 static  ok           172.22.22.33/16
net2/a172a22a22a31 static  ok           172.22.22.31/16
net2/a172a22a22a34 static  ok           172.22.22.34/16
net2/a172a22a22a35 static  ok           172.22.22.35/16
net2/a172a22a22a36 static  ok           172.22.22.36/16
net2/network01    static   ok           172.22.22.220/24
net3/acme         static   ok           192.168.100.100/24
lo0/v6            static   ok           ::1/128
# 可以看到 net2/network01 名称是我们指定的


ipadm show-addr
# 再次查看
root@hn01:~# ipadm show-addr 
ADDROBJ           TYPE     STATE        ADDR
lo0/v4            static   ok           127.0.0.1/8
net2/v4           static   ok           172.22.22.27/24
net2/a172a22a22a29 static  ok           172.22.22.29/24
net2/a172a22a22a33 static  ok           172.22.22.33/16
net2/a172a22a22a31 static  ok           172.22.22.31/16
net2/a172a22a22a34 static  ok           172.22.22.34/16
net2/a172a22a22a35 static  ok           172.22.22.35/16
net2/a172a22a22a36 static  ok           172.22.22.36/16
net3/acme         static   ok           192.168.100.100/24
lo0/v6            static   ok           ::1/128

2.磁盘管理

echo | format
# 查看磁盘
root@hn01:~# echo |format 
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t600B3420A0CAFC2D2B2DDC584DFD00D8d0 <MacroSAN-LU-1.0-1.00TB>
          /scsi_vhci/disk@g600b3420a0cafc2d2b2ddc584dfd00d8
       1. c0t600B3423D220E50DE663D8E26DBB00D8d0 <MacroSAN-LU-1.0-1.00TB>
          /scsi_vhci/disk@g600b3423d220e50de663d8e26dbb00d8
       2. c0t50015EBAAC505AA0d0 <ZTE-ZXUSP-V1.0-500.00GB>
          /scsi_vhci/disk@g50015ebaac505aa0
       3. c0t50015EBBC5E98737d0 <ZTE-ZXUSP-V1.0-1.00TB>
          /scsi_vhci/disk@g50015ebbc5e98737
       4. c0t50015EBDEF0F78ECd0 <ZTE-ZXUSP-V1.0-1.00TB>
          /scsi_vhci/disk@g50015ebdef0f78ec
       5. c0t50015EBF89285A45d0 <ZTE-ZXUSP-V1.0-500.00GB>
          /scsi_vhci/disk@g50015ebf89285a45
       6. c1t0d0 <DELL-PERC H730 Mini-4.26-558.38GB>
          /pci@0,0/pci8086,2f02@1/pci1028,1f49@0/iport@v0/disk@v61866da079607700236b6d8a09acd690,0
Specify disk (enter its number): Specify disk (enter its number): 

3.FC（FC SAN）磁盘映射

stmfadm add-view [–n, –-lun logical-unit-number –t, –-target-group group-name –h, –-host-group group-name] lu-name

将一个逻辑单元视图条目添加到逻辑单元 lu-name，其中 lu-name 是逻辑单元的 STMF 名称，如 list-lu 子命令所示。add-view 子命令为用户提供了针对逻辑单元的访问控制实施机制，并为包含启动器和目标的给定集合的逻辑单元提供了逻辑单元号的分配方法。必须至少有一个应用的视图，然后才能将逻辑单元提供给启动器使用。每个视图条目都将分配一个条目名称，在 remove-view 和 list-view 子命令中可使用该名称来引用条目。

stmfadm add-view 支持以下选项：

–n, –-lun logical-unit-number
logical-unit-number 是为此视图条目分配给逻辑单元的一个整数，其范围是 0-16383。如果未指定此选项，则将由 STMF 框架来分配逻辑单元号。

–t, –-target-group group-name
group-name 是之前使用 STMF create-tg 子命令创建的目标组的名称。如果未指定此选项，将可通过所有目标使用此逻辑单元。

–h, –host-group group-name
group-name 是之前使用 STMF create-hg 子命令创建的主机组的名称。如果未指定此选项，此逻辑单元将可供登录到 STMF 框架的所有启动器使用。

stmfadm list-lu -v

4.iSCSI （IP SAN）磁盘映射

stmfadm add-view -n 600144F0A710450000005BE47C6D0001 -t TG1 -h HG1
# 把600144F0A710450000005BE47C6D0001这个lun分别关联TG1 目标组(TARGET GROUP)和HG1这个主机组（HOST GROUP）
centos 上面使用以下命令
[root@HN-IDC-NDP-node04 ~]# iscsiadm -m discovery -t st -p 172.22.22.27
172.22.22.27:3260,-1 iqn.1986-03.com.sun:02:2adbe0c8-7693-46ca-8845-8543a076f73d
172.22.22.27:3260,-1 iqn.1986-03.com.sun:02:32b4a06d-9bef-4b2e-913f-d6c32f41d829
172.22.22.27:3260,-1 iqn.1986-03.com.sun:02:5b7158bc-5de2-43d8-83d7-f71181bc7813
172.22.22.27:3260,-1 iqn.1986-03.com.sun:02:d65f1c4e-724c-4e82-92a5-fa0241ab52b2

iscsiadm -m node -T iqn.1986-03.com.sun:02:2adbe0c8-7693-46ca-8845-8543a076f73d -p 172.22.22.27 --login
iscsiadm -m node -T iqn.1986-03.com.sun:02:32b4a06d-9bef-4b2e-913f-d6c32f41d829 -p 172.22.22.27 --login
iscsiadm -m node -T iqn.1986-03.com.sun:02:5b7158bc-5de2-43d8-83d7-f71181bc7813 -p 172.22.22.27 --login
iscsiadm -m node -T iqn.1986-03.com.sun:02:d65f1c4e-724c-4e82-92a5-fa0241ab52b2 -p 172.22.22.27 --login