Several Advantages of Impact Crusher

We all know that there are varieties types of  crusher, but all of them have different strengths and weaknesses,applicable materials are also different. For example, compare the impact breaker and hammer breaker, the former has the following advantages: 1, the expected size adjustment is convenient, flexible, and the range is wide
Impact crusher our company produced can adjust the feed size through a variety of ways , such as the regulation of the rotor speed, adjust  the counter plate and the gap of grinding chamber ; the gap adjustment can be achieved by mechanical or hydraulic type, if we adopt the hydraulic adjustment system,we can conveniently to press the operation button or shipping distance control system to adjust the gap; while the discharge particle size adhustment can only be achieved by the replacement of the bottom plate.
 

Impact breaker  can crush both soft and hard materials  plate hammer of the hammer breaker can be firmly fixed on the rotor by the mechanical clamping structure , when the great moment of inertia with the rotor rotates. compare to the hammer breaker (hammer was hanging), impact breaker rotor has greater momentum, adapt crushing hard materials have lower energy consumption at the same time. 3, can deal effectively with the materials which contain large amount of water, anti-cloggingwhen processing the materials which contain excessive moisture,  feed chute and counterattack board of the impact crusher can be equipped with a heating device to prevent the adhesion of the material. Crusher is not required to be equipped with the bottom screen to can effectively prevent clogging. Hammer crusher can not prevent the bonding of materials by heating, and shall be equipped with the bottom screen, increasing the possibility of clogging. 4, the wear and tear of wearing parts is smaller than the hammer crusher, the metal utilization is  high as to the impact breaker our company produced, its wear only appears at the looking materials side.Normal rotor speed, feed plate hammer will fall to the surface (of attack), the plate hammer back and sides are not to be worn. Even Looking material side wear very little.And the bottom of the grinding rod is also very easy to replace. Impact crusher board hammer metal utilization rate can be as high as 45% -48%. hammerhead of the hammer crusher is hanging, wear and tear occurs in the upper, front, rear and side, compare to the plate hammer, hammer wear more serious, hammer metal utilization is only about 25%. And the rotor body itself may also be subject to wear. 

original link: http://yalingkara02.blog.com/

 

Single toggle jaw crusher : http://www.ore-machine.com/jaw-crusher.html
Hammer crusher : http://www.hxjqcrusher.com/crusher/Hammer-crusher.html

转载于:https://www.cnblogs.com/dvbcxb/archive/2012/09/20/2695174.html