Introduction to the Structure of the Crusher

Coarse crushing crushers' design principle and structure are similar : they are mainly composed of the rack, movable jaw, eccentric shaft, the fixed jaw plate, activities jaw plate, toggle plate, adjust the seat parts, electric motor through V-belt by the sheaves, eccentric shaft, so that the movable jaw can do reciprocating motion, which will make the entered crushing cavity material broke, the material is discharged from the discharge opening by gravity. Processing capacity of the crusher affected by many factors, such as: the nature of the material, switches, particle size, composition, feeding, working conditions and so on, the calibration processing capacity of this machine shall preview  the rocks of medium hardness of the material, Bulk density of 1.6 prevail.
      

Fixed jaw  which rely on the bolts was fastened on the front wall 's rack, the activity jaw board were tightened aside the activity board according to the layering, when the jaw is weared and teared (commonly with the bottom wear lighter), these two can adjust , invert their positions, and continue to use. Bracket besides support the movable jaw so that it runs according to a certain track, when the crushing cavity can not be broken the entered materials which leaving the load surge of foreign bodies ,it can play  the role of insurance , through their own fault,shedding the load to protect other parts from damage.  The adjustable seat  are suspended in the ear of the rack on both sides of the seat,  there is a T-bolt an adjustment gasket between the adjustable seat and the back wall , its role is to open the top and adjust the seat to change the shim thickness adjustable discharge mouth width, to obtain the desired product size.
       

Tighten the spring mechanism to ensure the entire organization of the jaw crusher closely integrated, and part of the balance in the moving jaw and elbow panels work crusher spring pressure should not be too large, as long as  it can eliminate the noise of  bracket with anti-adjustment of the movable jaw the Zama . This machine is designed  three pairs jaws of different pitch, fine pitch, apply to the discharge opening is 10mm particle size 5 ~ 15mm occasions, in the pitch of 10mm particle size 10-25mm occasion of the discharge opening, the coarse pitch apply to the discharge opening to 20mm particle size 10-25mm occasions where a pair of fine-tooth installed on this machine, we need to order their separately needs to design according to the other two users . 

Portable crusher : http://www.crusher-export.com/mobile-crusher.html
Ore beneficiation : http://www.ore-machine.com/ore-beneficiation.html

转载于:https://www.cnblogs.com/dvbcxb/archive/2012/08/10/2632097.html