Hammer crusher is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture such as barite, limestone, terrazzo,cement, coal, coke, gypsum, aluminum sulfate, slag, salt, chalk, blocks, cement, brick, tile,etc. It has the features of simple structure, big crushing ratio, high production efficiency, uniform. particle size, etc. The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess. And hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure.
Working principle of hammer crusher
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.
Not only can the hammer crusher be applied in crushing production line and sand making production line, but it also replaces the cone crusher in beneficiation production line.Due to their superior quality and dependable service,Daswell products have been exported in large quantities to over 75 countries and regions such as Mongolia, Vietnam, France, Germany, Malaysia, Turkey, Middle East, Africa, etc.
DASWELL is a high-tech enterprise, which is specializing in the research, development, and manufacture of industrial stone crushing & screening equipment, grinding mills, mining equipment and so on. So far, we have established a whole production chain, of which main products cover stone crushing & screening equipment: jaw crusher, cone crusher, diesel engine crusher, impact crusher, vertical impact crusher, hammer crusher, vibrating feeder.
http://www.dwcrusher.com/products/stone-crushers/hammer-crusher.html
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/27663704/viewspace-747066/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/27663704/viewspace-747066/