IP第二次实验报告

 一，添加IP地址

R1

[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[R1-Serial4/0/0]ip add 12.1.1.1 24
 

R2

[ISP-Serial4/0/0]ip add 12.1.1.2 24
[ISP-Serial4/0/1]ip add 23.1.1.1 24
[ISP-Serial3/0/0]ip add 34.1.1.1 24

[ISP-LoopBack0]ip add 2.2.2.2 24

R3

R3-GigabitEthernet0/0/0]ip add 192.168.2.1 24
[R3-Serial4/0/1]ip add 23.1.1.2 24
 

R4

[R4-GigabitEthernet0/0/0]ip add 192.168.3.1 24
[R4-Serial4/0/0]ip add 34.1.1.2 24
 

二，设置HDLC封装  PAP， CHAP认证

aaa认证

[ISP-aaa]local-user huawei privilege level 15 password  cipher 123456
 

HDLC封装：

[R1-Serial4/0/0]link-protocol hdlc 

[ISP-Serial4/0/0]link-protocol hdlc 

 

PAP认证：

[ISP-Serial4/0/1]ppp authentication-mode pap

[R3-Serial4/0/1]ppp pap local-user huawei password cipher 123456

 

CHAP认证： 

[ISP-Serial3/0/0]ppp authentication-mode chap

[R4-Serial4/0/0]ppp chap password cipher 123456
[R4-Serial4/0/0]ppp chap user huawei

 

三，配置缺省及NAT

R1

[R1]ip route-static 0.0.0.0 0 12.1.1.2

[R1]acl 2000
[R1-acl-basic-2000]rule 1 permit  source any
[R1-acl-basic-2000]int s4/0/0 
[R1-Serial4/0/0]nat outbound 2000
 

R3

[R3]ip route-static 0.0.0.0 0 23.1.1.1

[R3]acl 2000
[R3-acl-basic-2000]rule 1 permit source  any
[R3-acl-basic-2000]int s 4/0/1
[R3-Serial4/0/1]nat outbound 2000
 

R4

[R3]ip route-static 0.0.0.0 0 34.1.1.1

[R4]acl 2000
[R4-acl-basic-2000]rule 1 permit source any
[R4]int s4/0/0
[R4-Serial4/0/0]nat outbound 2000
 

四，GRE封装

R1

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp      
[R1-Tunnel0/0/0]source 12.1.1.1
[R1-Tunnel0/0/0]nhrp entry multicast dynamic 
[R1-Tunnel0/0/0]nhrp network-id 100

 

R3

[R3]int t 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.2 24 
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source s4/0/1
[R3-Tunnel0/0/0]
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register 
[R3-Tunnel0/0/0]nhrp network-id 100
 

R4

[R4]int t 0/0/0
[R4-Tunnel0/0/0]ip add 10.1.1.3 24
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp
[R4-Tunnel0/0/0]source s 4/0/0
[R4-Tunnel0/0/0]
[R4-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register 
[R4-Tunnel0/0/0]nhrp network-id 100

五，使用RIP互通

R1

[R1]rip 1   
[R1-rip-1]version 2
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 10.0.0.0
 

R3

[R3]rip 1
[R3-rip-1]vers 2
[R3-rip-1]network 192.168.2.0 
[R3-rip-1]network 10.0.0.0
 

R4

[R4]rip 1
[R4-rip-1]version 2
[R4-rip-1]net 10.0.0.0
[R4-rip-1]network 192.168.3.0

六 关闭水平分割

[R1-Tunnel0/0/0]undo rip split-horizon 

七，互相通讯