DS200TCEAG28TF 燃机涡轮机

产品标题: DS200TCEAG28TF 燃机涡轮机

型号：DS200TCEAG28TF

品牌：GE

                                              产品详情资料：

电流和电压范围和分辨率在4至20 mA范围内，模块扫描PLC的输出数据，使4 mA对应于0的计数，20 mA对应于32000的计数。在0至20 mA范围内，用户数据被缩放，使得0 mA对应于0的计数，20 mA对应于32000。在0至20 mA模式下，高达32767的值提供约20.5 mA的输出。在电流模式下，模块还向PLC报告开环故障。对于默认单极模式（0至+10伏）下的电压操作，数据被缩放，使得0伏对应于0的计数，+10伏对应于32000的计数。在此模式下，高达32767的值产生约10.24伏的超范围输出。在-10至+10伏范围内，数据被缩放，因此-10伏对应于-3200的计数，+10伏对应于+32000的计数。在此范围内，-32767至+32767的输出值导致超出范围约为-10.24伏至+10.24伏。

                                                产品英文详情料:

Current and Voltage Ranges and Resolution In the 4 to 20 mA range the module scans output data from the PLC so that 4 mA corresponds to a count of 0, and 20 mA corresponds to a count of 32000. In the 0 to 20 mA range, user data is scaled so that 0 mA corresponds to a count of 0 and 20 mA corresponds to 32000. In 0 to 20 mA mode, a value up to 32767 provides a maximum output of approximately 20.5 mA. In current mode, the module also reports an open loop fault to the PLC. For voltage operation in the default unipolar mode (0 to +10 volts), data is scaled so that 0 volts corresponds to a count of 0 and +10 volts corresponds to a count of 32000. In this mode, a value up to 32767 creates an overrange output of approximately 10.24 volts. In the -10 to +10 volt range, data is scaled so that -10 volts corresponds to a count of -32000 and +10 volts corresponds to a count of +32000. In this range, output values from -32767 to +32767 result in an overrange of approximately -10.24 volts to +10.24 volts.