DS200CTBAG1ACC 通用数据处理器终端板

产品标题:DS200CTBAG1ACC 通用数据处理器终端板

型号：DS200CTBAG1ACC

品牌：GE

 

                                                       产品详情资料：

扩展背板的建议安装方向对于扩展和远程背板，电源负载额定值取决于背板的安装位置和环境温度。在60°C（140°F）温度下，扩展背板垂直安装在面板上时的额定负载为***。IS210AEBIH1BEA背板水平安装时的电源额定负载为：? 25°C（77°F）时的温度–满载? 60°C（140°F）时的温度–在19英寸机架中安装背板满载的50%IC693ACC308前安装适配器支架可用于将12槽通用背板（IC695CHS012）或10槽扩展背板（IC694CHS392）安装到19英寸机架的正面。通过将适配器支架顶部和底部的卡舌插入塑料背板盖顶部和底部相应的插槽，安装适配器支架。无需拆下盖即可安装支架。支架就位后，将两个螺钉（随支架一起提供）穿过背板孔的背面插入并拧紧到支架的螺纹孔中。

                                                   产品英文详情料:

Recommended Mounting Orientation for Expansion Backplanes For Expansion and Remote Backplanes, power supply load rating depends on the mounting position of the backplane and the ambient temperature. The load rating with the Expansion Backplane mounted upright on a panel is*** at 60°C (140°F) Power supply load ratings with the backplane mounted horizontally are: ? Temperature at 25°C (77°F) – full load ? Temperature at 60°C (140°F) – 50% of full load ounting a Backplane in a 19-Inch Rack The IC693ACC308 Front Mount Adapter Bracket can be used to mount a 12-Slot Universal Backplane (IC695CHS012) or a 10-Slot Expansion Backplane (IC694CHS392) to the front face of a 19” rack. Install the adapter bracket by inserting the tabs at the top and bottom of the adapter bracket into the corresponding slots at the top and bottom of the plastic backplane cover. It is not necessary to remove the cover to install the bracket. With the bracket in place, insert and tighten the two screws (included with the bracket) through the back of the backplane holes into the threaded holes in the bracket.IS210AEBIH1BEA