启明云端分享|SSD202D核心板使用NFS

提示：作为Espressif（乐鑫科技）大中华区合作伙伴及sigmastar（厦门星宸）VAD合作伙伴，我们不仅用心整理了你在开发过程中可能会遇到的问题以及快速上手的简明教程供开发小伙伴参考。同时也用心整理了乐鑫及星宸科技的新产品、新方案的主要特点及应用！希望你能第一时间了解并快速用上好的方案和产品！

---

ubuntu安装NFS服务

# cd ~/ssd20x
# mkdir nfs
# cp ../project/image/output/rootfs/* ./ -rf
# cp ../project/image/output/customer/ . -rf
# cp ../project/image/output/appconfigs/ . -rf
# cp ../project/image/output/miservice/config/ . -rf

---

ubuntu开启NFS服务

#sudo vi /etc/exports

• /home/industio/ssd20x/nfs/ *(rw,sync)

#sudo /etc/init.d/nfs-kernel-server restart

本地验证
#sudo mount -t nfs -o nolock 192.168.1.125:/home/industio/ssd20x/nfs/ /mnt
#ls /mnt
#sudo umount /mnt

---

开发板挂载NFS

确认开发板与ubuntu处于同一局域网内，且能相互通信：


#mount -t nfs -o nolock 192.168.1.125:/home/industio/ssd20x/nfs/ /mnt
#ls /mnt
#umount /mnt

---

NFS根文件系统

#将nfs编译进kernel
#cd kernel
#ARCH=arm make menuconfig
-- Networking support —>
Networking options —>
-- TCP/IP networking
[] IP: kernel level autoconfiguration
[] IP: DHCP support
[] IP: BOOTP support
File systems —>
[] Network File Systems —>
<> NFS client support
<> NFS client support for NFS version 2
<> NFS client support for NFS version 3
<> NFS client support for NFS version 4
[*] Root file system on NFS

重新编译并更新kernel

---

重新设置bootargs

需要将bootargs设置根文件系统指向nfs，这里192.168.1.125是ubuntu的IP，192.168.1.85是与ubuntu ip同一局域网的随机ip：

setenv bootargs console=ttyS0,115200 root=/dev/nfs rw
nfsroot=192.168.1.125:/home/industio/ssd20x/nfs
ip=192.168.1.85:192.168.1.125:192.168.1.1:255.255.255.0::eth0:off
init=/linuxrc rootwait=1 LX_MEM=0x3f00000
mma_heap=mma_heap_name0,miu=0,sz=0xa00000 mma_memblock_remove=1
highres=off
mmap_reserved=fb,miu=0,sz=0x300000,max_start_off=0x3300000,max_end_off=0x3600000
mtdparts=nand0:384k@1280k(IPL0),384k(IPL1),384k(IPL_CUST0),384k(IPL_CUST1),768k(UBOOT0),768k(UBOOT1),256k(ENV),256k(ENV1),0x20000(KEY_CUST),0x60000(LOGO),0x500000(KERNEL),0x500000(RECOVERY),-(UBI)

重新启动开发板后，将看到nfs正常挂载了：