通常为了节省时间,在VMware中安装一套Linux后,会直接克隆一份出来使用。但在克隆REDHAT 6后,会发现网卡名称发生变化,比如eth0会变为eth1,下面介绍下克隆后的redhat 6,如何修改主机名、IP地址和网卡名称。
修改主机名(共2步)
hostname amto02
vi /etc/sysconfig/network -> 修改项:HOSTNAME=amto02
还原网卡名称为eth0:
[root@amto02 u01]# cat /etc/udev/rules.d/70-persistent-net.rules.bak
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x8086:0x100f (e1000) (custom na