kali配置临时IP，静态IP

目录

1配置IP

1.配置临时IP 

2.配置永久IP

1配置IP

1.配置临时IP 

┌──(root💀kali)-[~]
└─# ifconfig eth0 192.168.0.5/24
┌──(root💀kali)-[~]
└─# route add default gw 192.168.0.1

1.刚开始添加route时会显示网络不可达  

需要进入vim /etc/network/interfaces 添加 dhcp

auto eth0
iface eth0 inet dhcp

2.重启kali，这里我选择桥接模式就成功，NAT模式添加不成功。 

重新添加一遍ip和route。

┌──(root💀kali)-[~]
└─# route add default gw 192.168.0.1
                                                                             
┌──(root💀kali)-[~]
└─# ifconfig                     
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.5  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::20c:29ff:fef3:4ff5  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:f3:4f:f5  txqueuelen 1000  (Ethernet)
        RX packets 5  bytes 387 (387.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 656 (656.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

3.添加DNS服务器 

┌──(root💀kali)-[~]
└─# vim /etc/resolv.conf                    
nameserver 114.114.114.114

2.配置永久IP

需要进入vim /etc/network/interfaces刚才配置的 dhcp注释掉

添加iface,address,netmask,gateway

auto eth0
#iface eth0 inet dncp
iface eth0 inet static
address 192.168.0.6
netmask 255.255.255.0
gateway 192.168.0.1

重启网络服务

┌──(root💀kali)-[~]
└─# systemctl restart networking

ifconfig 检查一下ip设置是否成果，ping一下看是否成功

└─# ping baidu.com                                                    
64 bytes from 39.156.66.10 (39.156.66.10): icmp_seq=1 ttl=51 time=30.2 ms
64 bytes from 39.156.66.10 (39.156.66.10): icmp_seq=2 ttl=51 time=30.0 ms