基于S3C2450 + WINCE的背光驱动及背光亮度调节应用程序移植详解之驱动篇[原创]

 背光驱动程序设计

 

1. 这里硬件接口使用S3C2450的GPB1，即定时器1.

    定时器的输入频率 = PCLK /{prescaler value + 1} / {divider value}。

    首先设置prescaler value：

    static void BAK_SetPrescaleAndMux( DWORD v_Prescale, DWORD v_Mux ) { // Set prescale. if(v_Prescale<=255) { v_pPWMRegs->TCFG0 = v_pPWMRegs->TCFG0 & (~0xff) | v_Prescale; } // Set divider value.Timer1 is used switch(v_Mux) { case 1:// 1/2 v_pPWMRegs->TCFG1 = v_pPWMRegs->TCFG1 & (~0xF0) | (0x0<<4); break; case 2:// 1/4 v_pPWMRegs->TCFG1 = v_pPWMRegs->TCFG1 & (~0xF0) | (0x1<<4); break; case 3:// 1/8 v_pPWMRegs->TCFG1 = v_pPWMRegs->TCFG1 & (~0xF0) | (0x2<<4); break; case 4:// 1/16 v_pPWMRegs->TCFG1 = v_pPWMRegs->TCFG1 & (~0xF0) | (0x3<<4); break; case 5: default:// External TCLK0 v_pPWMRegs->TCFG1 = v_pPWMRegs->TCFG1 & (~0xF0) | (0x4<<4); break; } }

    然后设置divider value：

    static void BAK_SetTCNTB( DWORD v_Tcntb) { if(v_Tcntb<=0xffff) { v_pPWMRegs->TCNTB1 = v_Tcntb; } }

2.    接着设置TOUT1的定时器PWM脉宽：

static void BAK_SetTCMPB( DWORD v_Tcmpb) { if(v_Tcmpb<=0xffff) { v_pPWMRegs->TCMPB1 = v_Tcmpb; } }

 3.   设置完这些就可以开启TOUT1了。代码如下：

static void BAK_StartPwmTimer( void ) { // Set GPB1 to TOUT1. v_pIOPregs->GPBCON &= ~(0x03<<2); v_pIOPregs->GPBCON |= (0x02<<2); // Stop pwm timer 1