shape用于设定形状,可以在selector,layout等里面使用,有6个子标签,各属性如下:
android:shape:设置样式rectangle,oval,line,ring。,默认rectangle
<?xml version="1.0" encoding="utf-8"?>
<shape xmlns:android="http://schemas.android.com/apk/res/android" >
<!-- 圆角 -->
<corners
android:radius="9dp"
android:topLeftRadius="2dp"
android:topRightRadius="2dp"
android:bottomLeftRadius="2dp"
android:bottomRightRadius="2dp"/><!-- 设置圆角半径 -->
<!-- 渐变 -->
<gradient
android:startColor="@android:color/white"
android:centerColor="@android:color/black"
android:endColor="@android:color/black"
android:useLevel="true"
android:angle="45"
android:type="radial"
android:centerX="0"
android:centerY="0"
android:gradientRadius="90"/>
<!-- 间隔 -->
<padding
android:left="2dp"
android:top="2dp"
android:right="2dp"
android:bottom="2dp"/><!-- 各方向的间隔 -->
<!-- 大小 -->
<size
android:width="50dp"
android:height="50dp"/><!-- 宽度和高度 -->
<!-- 填充 -->
<solid
android:color="@android:color/white"/><!-- 填充的颜色 -->
<!-- 描边 -->
<stroke
android:width="2dp"
android:color="@android:color/black"
android:dashWidth="1dp"
android:dashGap="2dp"/>
</shape>
solid:填充
android:color指定填充的颜色
gradient:渐变
android:startColor和android:endColor分别为起始和结束颜色,
android:angle是渐变角度,必须为45的整数倍。
另外渐变默认的模式为android:type="linear",即线性渐变,
可以指定渐变为径向渐变,android:type="radial",径向渐变需要指定半径android:gradientRadius="50"。
angle值对应的位置如图:
stroke:描边
dashWidth和dashGap属性,只要其中一个设置为0dp,则边框为实现边框
android:width="20dp" 设置边边的宽度
android:color="@android:color/black" 设置边边的颜色
android:dashWidth="2dp" 设置虚线的宽度
android:dashGap="20dp" 设置虚线的间隔宽度
corners:圆角当且仅当控件类型位rectangle时才有作用,圆角半径的大小必须大于1
android:radius为角的弧度,值越大角越圆。
我们还可以把四个角设定成不同的角度,
不需要设置不同圆角就android:Radius="20dp"
要设置不同圆角得,同时设置五个属性,则Radius属性无效
android:Radius="20dp" 设置四个角的半径
android:topLeftRadius="20dp" 设置左上角的半径
android:topRightRadius="20dp" 设置右上角的半径
android:bottomLeftRadius="20dp" 设置右下角的半径
android:bottomRightRadius="20dp" 设置左下角的半径
可以设置上下左右四个方向的间隔