监视指定网络接口的数据包
tcpdump -i eth1 //默认监听eth0
监视指定主机的数据包
获取主机收到和发出的所有数据包
tcpdump host ip或hostname
打印helios 与 hot 或者与 ace 之间通信的数据包
tcpdump host helios and \( hot or ace \)
截获主机210.27.48.1 和主机210.27.48.2 或210.27.48.3的通信
tcpdump host 210.27.48.1 and \( 210.27.48.2 or 210.27.48.3 \)
打印ace与任何其他主机之间通信的IP数据包, 但不包括与helios之间的数据包
tcpdump ip host ace and not helios
获取主机210.27.48.1除了和主机210.27.48.2之外所有主机通信的ip包
tcpdump ip host 210.27.48.1 and ! 210.27.48.2
截获主机hostname发送的所有数据
tcpdump -i eth0 src host hostname
监视所有送到主机hostname的数据包
tcpdump -i eth0 dst host hostname
监视指定主机和端口的数据包
获取主机210.27.48.1接收或发出的telnet包
tcpdump tcp port 23 and host 210.27.48.1
tcpdump与wireshark
tcpdump tcp -i eth1 -t -s 0 -c 100 and dst port ! 22 and src net 192.168.1.0/24 -w ./target.cap
(1)tcp: ip icmp arp rarp 和 tcp、udp、icmp这些选项等都要放到第一个参数的位置,用来过滤数据报的类型
(2)-i eth1 : 只抓经过接口eth1的包
(3)-t : 不显示时间戳
(4)-s 0 : 抓取数据包时默认抓取长度为68字节。加上-S 0 后可以抓到完整的数据包
(5)-c 100 : 只抓取100个数据包
(6)dst port ! 22 : 不抓取目标端口是22的数据包
(7)src net 192.168.1.0/24 : 数据包的源网络地址为192.168.1.0/24
(8)-w ./target.cap : 保存成cap文件,方便用ethereal(即wireshark)分析
摘抄自 http://www.cnblogs.com/ggjucheng/archive/2012/01/14/2322659.html