OSPF 邻居建立过程 debug ip ospf adj 事件记录

最新推荐文章于 2023-08-28 14:05:20 发布

autop500

最新推荐文章于 2023-08-28 14:05:20 发布

阅读量869

点赞数

分类专栏：路由

本文链接：https://blog.csdn.net/autop500/article/details/107258067

版权

路由专栏收录该内容

4 篇文章 0 订阅

订阅专栏

-----------sw1------------------

SW1(config-if)#
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Interface going Down
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: 10.1.1.1 address 10.1.1.1 is dead, state DOWN
*Jul 10 09:45:32.366: %OSPF-5-ADJCHG: Process 100, Nbr 10.1.1.1 on Vlan1 from 2WAY to DOWN, Neighbor Down: Interface down or detached
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Neighbor change event
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: DR/BDR election
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Elect BDR 0.0.0.0
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Elect DR 10.1.1.5
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: DR: 10.1.1.5 (Id) BDR: none
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: 10.1.1.5 address 10.1.1.5 is dead, state DOWN
*Jul 10 09:45:32.366: %OSPF-5-ADJCHG: Process 100, Nbr 10.1.1.5 on Vlan1 from FULL to DOWN, Neighbor Down: Interface down or detached
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Neighbor change event
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: DR/BDR election
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Elect BDR 0.0.0.0
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Elect DR 0.0.0.0
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: DR: none BDR: none
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Remember old DR 10.1.1.5 (id)
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: 10.1.1.4 address 10.1.1.4 is dead, state DOWN
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Neighbor change event
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: DR/BDR election
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Elect BDR 0.0.0.0
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Elect DR 0.0.0.0
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: DR: none BDR: none
*Jul 10 09:45:32.366: OSPF-100 ADJ Vl1: Interface going Up
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: 2 Way Communication to 10.1.1.5, state 2WAY
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Backup seen event before WAIT timer
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR/BDR election
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect BDR 0.0.0.0
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect DR 10.1.1.5
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR: 10.1.1.5 (Id) BDR: none
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Nbr 10.1.1.5: Prepare dbase exchange
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Send DBD to 10.1.1.5 seq 0x19D6 opt 0x52 flag 0x7 len 32
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Rcv DBD from 10.1.1.5 seq 0x10FE opt 0x52 flag 0x7 len 32 mtu 1500 state EXSTART
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: NBR Negotiation Done. We are the SLAVE
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Nbr 10.1.1.5: Summary list built, size 0
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Send DBD to 10.1.1.5 seq 0x10FE opt 0x52 flag 0x0 len 32
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Rcv DBD from 10.1.1.5 seq 0x10FF opt 0x52 flag 0x1 len 92 mtu 1500 state EXCHANGE
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Exchange Done with 10.1.1.5
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Send LS REQ to 10.1.1.5 length 60 LSA count 3
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Send DBD to 10.1.1.5 seq 0x10FF opt 0x52 flag 0x0 len 32
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Rcv LS UPD from 10.1.1.5 length 136 LSA count 3
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Synchronized with 10.1.1.5, state FULL
SW(config-if)#
*Jul 10 09:45:32.368: %OSPF-5-ADJCHG: Process 100, Nbr 10.1.1.5 on Vlan1 from LOADING to FULL, Loading Done

--------------------sw2----------------

OSPF adjacency debugging is on
sw2#
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Cannot see ourself in hello from 10.1.1.4, state INIT
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Neighbor change event
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR/BDR election
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect BDR 0.0.0.0
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect DR 10.1.1.5
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR: 10.1.1.5 (Id) BDR: none
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: 2 Way Communication to 10.1.1.4, state 2WAY
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Neighbor change event
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR/BDR election
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect BDR 0.0.0.0
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect DR 10.1.1.5
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR: 10.1.1.5 (Id) BDR: none
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Nbr 10.1.1.4: Prepare dbase exchange
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Send DBD to 10.1.1.4 seq 0x10FE opt 0x52 flag 0x7 len 32
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Neighbor change event
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR/BDR election
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect BDR 0.0.0.0
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Elect DR 10.1.1.5
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: DR: 10.1.1.5 (Id) BDR: none
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Rcv DBD from 10.1.1.4 seq 0x19D6 opt 0x52 flag 0x7 len 32 mtu 1500 state EXSTART
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: First DBD and we are not SLAVE
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Rcv DBD from 10.1.1.4 seq 0x10FE opt 0x52 flag 0x0 len 32 mtu 1500 state EXSTART
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: NBR Negotiation Done. We are the MASTER
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Nbr 10.1.1.4: Summary list built, size 3
*Jul 10 09:45:32.367: OSPF-100 ADJ Vl1: Send DBD to 10.1.1.4 seq 0x10FF opt 0x52 flag 0x1 len 92
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Rcv LS REQ from 10.1.1.4 length 60 LSA count 3
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Send LS UPD to 10.1.1.4 length 136 LSA count 3
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Rcv DBD from 10.1.1.4 seq 0x10FF opt 0x52 flag 0x0 len 32 mtu 1500 state EXCHANGE
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Exchange Done with 10.1.1.4
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Synchronized with 10.1.1.4, state FULL
*Jul 10 09:45:32.368: %OSPF-5-ADJCHG: Process 100, Nbr 10.1.1.4 on Vlan1 from LOADING to FULL, Loading Done
sw2#
*Jul 10 09:45:32.368: OSPF-100 ADJ Vl1: Nbr 10.1.1.4: Clean-up dbase exchange