Kubernetes1.19认证分享

一、前言

首先非常感谢blackpiglet的博文《CKA考试心得》，帮我快速了解备考CKA的各种注意事项。考试指南和细节啥的，大家可以去阅读他的文章。
我是于2020年10月23号通过CKA考试的，整个过程还比较顺利。之前一直没时间想起来要写博文，今天刚好有时间给大家分享一下我遇到的问题和解决办法。
我在考试过程中，出现过Chrome浏览器失去响应的情况，大家切记不要去刷新。一直等待即可，我等了十几分钟…

二、CKA考题解析

1.建立clusterrole，资源deployment、statefulset、deamonset,verbs是create；在namespace cka里建立名为 sa 的serviceaccount；将clusterrole绑定到serviceaccount

官方相关文档

# 解题思路：
# 在系统已有的clusterrole admin的yaml文件中直接复制内容。
# 需要注意资源deployment等的apiGroups有内容，为apps。
# clusterrole是没有namespace属性的。
kubectl get clusterrole admin -o yaml > clusterrole.yaml
cat clusterrole.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: clusterrole
rules:
- apiGroups:
  - apps
  resources:
  - daemonsets
  - deployments
  - statefulsets
  verbs:
  - create
kubectl create -f clusterrole.yaml
kubectl create serviceaccount sa -n cka
kubectl create clusterrolebinding bind --clusterrole=clusterrole --serviceaccout=cka:sa

2.建立多容器pod,container:nginx+redis+tomcat

# 解题思路：dry-run一个pod  -o yaml到yaml文件后，直接修改该文件
kubectl run multi-pod --image=nginx --dry-run=client -o yaml > multi-pod.yaml
cat multi-pod.yaml
apiVersion: v1
kind: Pod
metadata:
  name: multi-pod
  labels:
    app: run
spec:
  containers:
  - name: nginx
    image: nginx
  - name: redis
    image: redis
  - name: tomcat
    image: tomcat
kubectl create -f multi-pod.yaml
kubectl get pods

3.deployment scale replicas=5

kubectl scale  deployment nginx-deployment --replicas=5

4.创建networkpolicy，允许namespace cka的pod连接到namespace cka下所有pod的80端口
官方文档network-policies

# 解题思路：理解题目要求为ingress还是egress后，直接从官方文档copy.
# 需要注意spec.podSelector是必须项
cat networkpolicy.yaml
apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  name: networkpolicy
  namespace: cka
spec:
  podSelector: {}
  ingress:
  - from:
    - podSelector: {}
    ports:
    - protocol: TCP
      port: 80
  policyTypes:
  - Ingress

5.查找含有taint:noschedule的node，并将数量写入到指定文件,这里只写数字即可

kubectl describe nodes | grep -i noschedule > /<指定目录>/<指定文件>

6.kubenetes upgrade 升级到1.19.0,先按提示切集群，然后再切到master节点升级，注意：题目只要求升级master，工作节点不需要升级

# [kubeadm-upgrade](https://kubernetes.io/docs/tasks/administer-cluster/kubeadm/kubeadm-upgrade/) 
apt update
apt-cache madison kubeadm
apt-mark unhold kubeadm && \
apt-get update && apt-get install -y kubeadm=1.19.x-00 && \
apt-mark hold kubeadm
apt-get update && \
apt-get install -y --allow-change-held-packages kubeadm=1.19.x-00
kubeadm version
kubectl drain <cp-node-name> --ignore-daemonsets
sudo kubeadm upgrade plan
sudo kubeadm upgrade apply v1.19.x
kubectl uncordon <cp-node-name>
apt-mark unhold kubelet kubectl && \
apt-get update && apt-get install -y kubelet=1.19.x-00 kubectl=1.19.x-00 && \
apt-mark hold kubelet kubectl
apt-get update && \
apt-get install -y --allow-change-held-packages kubelet=1.19.x-00 kubectl=1.19.x-00

7.查找消耗CPU资源最多的pod,要求匹配标签-l app=myapp，并将pod的name写入到指定文件

kubectl top pods -l app=myapp --sort-by=cpu

8.创建ingress,servicename:hello,path:/hello,要求curl internal_ip/hello

ingress

# 解题思路：需要注意ingress controller的pod是否run,否则无法正确curl,使用kubectl get ingresses myingress获取到internal_ip验证curl
cat ingress.yaml
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: myingress
spec:
  rules:
  - http:
      paths:
      - pathType: Prefix
        path: /hello
        backend:
          service:
            name: hello
            port:
              number: 80

9.给已有deployment的nginx container添加port,name为http,container port为80；创建svc,暴露pod的容器端口http,type=nodePort

spec:
  containers:
  - name: nginx
    image: nginx
    ports:
    - name: http
      containerPort: 80
     
kubectl expose pod nginx --target-port=http --type=nodePort --port=80

10.kubectl drain

kubectl drain node1 --ignore-daemonsets

11.etcd backup 快照文件保存到指定文件，给定crt和key的位置和endpoint,完成后将指定备份文件恢复到etcd

etcd

ETCDCTL_API=3 etcdctl --endpoints=https://127.0.0.1:2379 --cert=/etc/kubernetes/pki/etcd/server.crt --key=/etc/kubernetes/pki/etcd/server.key --cacert=/etc/kubernetes/pki/etcd/ca.crt snapshot save /<指定路径>/<指定文件>

ETCDCTL_API=3 etcdctl --endpoints=https://127.0.0.1:2379 --cert=/etc/kubernetes/pki/etcd/server.crt --key=/etc/kubernetes/pki/etcd/server.key --cacert=/etc/kubernetes/pki/etcd/ca.crt snapshot restore /<指定路径>/<指定文件>

12.创建单容器pod使用nodeSelector,disk=ssd

nodePod

cat nodeselector.yaml
apiVersion: v1
kind: Pod
metadata:
  name: nginx
  labels:
    env: test
spec:
  containers:
  - name: nginx
    image: nginx
    imagePullPolicy: IfNotPresent
  nodeSelector:
    disk: ssd

13.使用sidecar busybox将容器的日志输出到指定文件

logging

logging.yaml
apiVersion: v1
kind: Pod
metadata:
  name: counter
spec:
  containers:
  - name: count
    image: busybox
    args:
    - /bin/sh
    - -c
    - >
      i=0;
      while true;
      do
        echo "$i: $(date)" >> /var/log/1.log;
        echo "$(date) INFO $i" >> /var/log/2.log;
        i=$((i+1));
        sleep 1;
      done
    volumeMounts:
    - name: varlog
      mountPath: /var/log
  volumes:
  - name: varlog
    emptyDir: {}

14.建立PVC,capacity为10Mi，accessmode:rwo；调整capacity为70Mi（如果是NFS做后端存储，则不支持动态扩容）

PVC

cat pvc.yaml
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: pvc
spec:
  storageClassName: manual
  accessModes:
    - ReadWriteOnce
  resources:
    requests:
      storage: 10Mi
kubectl create -f pvc.yaml
vim pvc.yaml
kubectl apply -f pvc.yaml

15.使用hostPath创建PV，accessmode为rwx，创建pvc,绑定该pv;创建pod使用该pvc

pvc

cat pv.yaml
apiVersion: v1
kind: PersistentVolume
metadata:
  name: task-pv-volume
  labels:
    type: local
spec:
  capacity:
    storage: 10Gi
  accessModes:
    - ReadWriteMany
  hostPath:
    path: "/mnt/data"

cat pvc.yaml
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: task-pv-claim
spec:
  accessModes:
    - ReadWriteMany
  resources:
    requests:
      storage: 10Gi

cat pod.yaml
apiVersion: v1
kind: Pod
metadata:
  name: task-pv-pod
spec:
  volumes:
    - name: task-pv-storage
      persistentVolumeClaim:
        claimName: task-pv-claim
  containers:
    - name: task-pv-container
      image: nginx
      volumeMounts:
        - mountPath: "/usr/share/nginx/html"
          name: task-pv-storage

16.node没有ready

ssh node  
systemctl status kubelet
systemctl start kubelet   
systemctl enable kubelet

17.提取Pod的日志行’error’写入到指定文件中

kubectl logs podname |grep "error"

三、CKA证书

最后，祝各位对容器化感兴趣的朋友都能一次过！