windows：
1.下载安装jdk并设置好环境变量
1.下载安装tomcat
2.下载安装apache
3.下载对应的mod_jk，要选择对应的版本，如图所示
4.整合，解压tomcat-connectors-xxx，将mod_jk.so复制到apache安装目录下的modules文件夹中，然后将以下文件保存在apache的安装目录下的conf文件夹中
httpd-jk.conf，最后几行就是的意思是将.jsp，.action以及.do交给tomcat处理，如有必要，可以按照格式添加需要交给tomcat处理的请求
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Configuration Example for mod_jk
# used in combination with Apache 2.2.x
# Change the path and file name of the module, in case
# you have installed it outside of httpd, or using
# a versioned file name.
LoadModule jk_module modules/mod_jk.so
<IfModule jk_module>
# We need a workers file exactly once
# and in the global server
JkWorkersFile conf/workers.properties
# Our JK error log
# You can (and should) use rotatelogs here
JkLogFile logs/mod_jk.log
# Our JK log level (trace,debug,info,warn,error)
JkLogLevel info
# Our JK shared memory file
JkShmFile logs/mod_jk.shm
# Define a new log format you can use in any CustomLog in order
# to add mod_jk specific information to your access log.
# LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" \"%{Cookie}i\" \"%{Set-Cookie}o\" %{pid}P %{tid}P %{JK_LB_FIRST_NAME}n %{JK_LB_LAST_NAME}n ACC %{JK_LB_LAST_ACCESSED}n ERR %{JK_LB_LAST_ERRORS}n BSY %{JK_LB_LAST_BUSY}n %{JK_LB_LAST_STATE}n %D" extended_jk
# This option will reject all requests, which contain an
# encoded percent sign (%25) or backslash (%5C) in the URL
# If you are sure, that your webapp doesn't use such
# URLs, enable the option to prevent double encoding attacks.
# Since: 1.2.24
# JkOptions +RejectUnsafeURI
# After setting JkStripSession to "On", mod_jk will
# strip all ";jsessionid=..." from request URLs it
# does *not* forward to a backend.
# This is useful, if all links in a webapp use
# URLencoded session IDs and parts of the static
# content should be delivered directly by Apache.
# Of course you can also do it with mod_rewrite.
# Since: 1.2.21
# JkStripSession On
# Start a separate thread for internal tasks like
# idle connection probing, connection pool resizing
# and load value decay.
# Run these tasks every JkWatchdogInterval seconds.
# Since: 1.2.27
JkWatchdogInterval 60
# Configure access to jk-status and jk-manager
# If you want to make this available in a virtual host,
# either move this block into the virtual host
# or copy it logically there by including "JkMountCopy On"
# in the virtual host.
# Add an appropriate authentication method here!
<Location /jk-status>
# Inside Location we can omit the URL in JkMount
JkMount jk-status
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
<Location /jk-manager>
# Inside Location we can omit the URL in JkMount
JkMount jk-manager
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# If you want to put all mounts into an external file
# that gets reloaded automatically after changes
# (with a default latency of 1 minute),
# you can define the name of the file here.
# JkMountFile conf/extra/uriworkermap.properties
# Example for Mounting a context to the worker "balancer"
# The URL syntax "a|b" instantiates two mounts at once,
# the first one is "a", the second one is "ab".
# JkMount /myapp|/* balancer
# Example for UnMounting requests for all workers
# using a simple URL pattern
# Since: 1.2.26
# JkUnMount /myapp/static/* *
# Example for UnMounting requests for a named worker
# JkUnMount /myapp/images/* balancer
# Example for UnMounting requests using regexps
# SetEnvIf REQUEST_URI "\.(htm|html|css|gif|jpg|js)$" no-jk
# Example for setting a reply timeout depending on the request URL
# Since: 1.2.27
# SetEnvIf Request_URI "/transactions/" JK_REPLY_TIMEOUT=600000
# Example for disabling reply timeouts for certain request URLs
# Since: 1.2.27
# SetEnvIf Request_URI "/reports/" JK_REPLY_TIMEOUT=0
# IMPORTANT: Mounts and virtual hosts
# If you are using VirtualHost elements, you
# - can put mounts only used in some virtual host into its VirtualHost element
# - can copy all global mounts to it using "JkMountCopy On" inside the VirtualHost
# - can copy all global mounts to all virtual hosts by putting
# "JkMountCopy All" into the global server
# Since: 1.2.26
</IfModule>
JkMount /*.jsp worker1
JkMount /*.do worker1
JkMount /*.action worker1workers.properties，最后一段就是连接tomcat的参数了
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Note that the distributed version of this file requires modification
# before it is usable.
#
# Reference documentation: http://tomcat.apache.org/connectors-doc/reference/workers.html
#
# As a general note, the characters $( and ) are used internally to define
# macros. Do not use them in your own configuration!!!
#
# Whenever you see a set of lines such as:
# x=value
# y=$(x)\something
#
# the final value for y will be value\something
# Define two status worker:
# - jk-status for read-only use
# - jk-manager for read/write use
worker.list=jk-status
worker.jk-status.type=status
worker.jk-status.read_only=true
worker.list=jk-manager
worker.jk-manager.type=status
# We define a load balancer worker
# with name "balancer"
worker.list=balancer
worker.balancer.type=lb
# error_escalation_time: seconds, default = recover_time/2 (=30)
# Determines, how fast a detected error should switch from
# local error state to global error state
# Since: 1.2.28
worker.balancer.error_escalation_time=0
# - max_reply_timeouts: number, default=0
# If there are to many reply timeouts, a worker
# is put into the error state, i.e. it will become
# unavailable for all sessions residing on the respective
# Tomcat. The number of tolerated reply timeouts is
# configured with max_reply_timeouts. The number of
# timeouts occuring is divided by 2 once a minute and the
# resulting counter is compared against max_reply_timeouts.
# If you set max_reply_timeouts to N and the errors are
# occuring equally distributed over time, you will
# tolerate N/2 errors per minute. If they occur in a burst
# you will tolerate N errors.
# Since: 1.2.24
worker.balancer.max_reply_timeouts=10
# Now we add members to the load balancer
# First member is "node1", most
# attributes are inherited from the
# template "worker.template".
worker.balancer.balance_workers=node1
worker.node1.reference=worker.template
worker.node1.host=localhost
worker.node1.port=8009
# Activation allows to configure
# whether this node should actually be used
# A: active (use node fully)
# D: disabled (only use, if sticky session needs this node)
# S: stopped (do not use)
# Since: 1.2.19
worker.node1.activation=A
# Second member is "node2", most
# attributes are inherited from the
# template "worker.template".
worker.balancer.balance_workers=node2
worker.node2.reference=worker.template
worker.node2.host=localhost
worker.node2.port=8209
# Activation allows to configure
# whether this node should actually be used
# A: active (use node fully)
# D: disabled (only use, if sticky session needs this node)
# S: stopped (do not use)
# Since: 1.2.19
worker.node2.activation=A
# Finally we put the parameters
# which should apply to all our ajp13
# workers into the referenced template
# - Type is ajp13
worker.template.type=ajp13
# - socket_connect_timeout: milliseconds, default=0
# Since: 1.2.27
worker.template.socket_connect_timeout=5000
# - socket_keepalive: boolean, default=false
# Should we send TCP keepalive packets
# when connection is idle (socket option)?
worker.template.socket_keepalive=true
# - ping_mode: Character, default=none
# When should we use cping/cpong connection probing?
# C = directly after establishing a new connection
# P = directly before sending each request
# I = in regular intervals for idle connections
# using the watchdog thread
# A = all of the above
# Since: 1.2.27
worker.template.ping_mode=A
# - ping_timeout: milliseconds, default=10000
# Wait timeout for cpong after cping
# Can be overwritten for modes C and P
# Using connect_timeout and prepost_timeout.
# Since: 1.2.27
worker.template.ping_timeout=10000
# - connection_pool_minsize: number, default=connection_pool_size
# Lower pool size when shrinking pool due
# to idle connections
# We want all connections to be closed when
# idle for a long time in order to prevent
# firewall problems.
# Since: 1.2.16
worker.template.connection_pool_minsize=10
# - connection_pool_timeout: seconds, default=0
# Idle time, before a connection is eligible
# for being closed (pool shrinking).
# This should be the same value as connectionTimeout
# in the Tomcat AJP connector, but there it is
# milliseconds, here seconds.
worker.template.connection_pool_timeout=600
# - reply_timeout: milliseconds, default=0
# Any pause longer than this timeout during waiting
# for a part of the reply will abort handling the request
# in mod_jk. The request will proceed running in
# Tomcat, but the web server resources will be freed
# and an error is send to the client.
# For individual requests, the timeout can be overwritten
# by the Apache environment variable JK_REPLY_TIMEOUT.
# JK_REPLY_TIMEOUT since: 1.2.27
worker.template.reply_timeout=300000
# - recovery_options: number, default=0
# Bit mask to configure, if a request, which was send
# to a backend successfully, should be retried on another backend
# in case there's a problem with the response.
# Value "3" disables retries, whenever a part of the request was
# successfully send to the backend.
worker.template.recovery_options=3
# worker.list defined worker_name, used by mod_jk.conf
worker.list=worker1
worker.worker1.port=8009
worker.worker1.host=localhost
worker.worker1.type=ajp13
worker.worker1.lbfactor=50
worker.worker1.cachesize=10
worker.worker1.cache_timeout=600
worker.worker1.socket_keepalive=1
worker.worker1.socket_timeout=300上面的worker.worker1.port=8009 指的是tomcat中server.xml配置文件的8009端口
最后，修改httpd.conf，在结尾处添加Include conf/httpd-jk.conf，意思是将前面的配置加载进去，如果要更改tomcat的默认工作目录，则找到带有htdocs的那两行，将目录修改成自己想要的目录就可以了，需要注意的是，该目录必须存在，否则会报错！下面是我的httpd.conf
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/Program Files (x86)/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "D:/Program Files (x86)/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:/Program Files (x86)/Apache Software Foundation/Apache2.2"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin cun.liu@qq.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName baiyang-pc:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "D:/webapps"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "D:/webapps">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
#Options Indexes FollowSymLinks
Options FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://baiyang-pc/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "D:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>
#
# "D:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "D:/Program Files (x86)/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://baiyang-pc/subscription_info.html
#
#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include conf/httpd-jk.conf
扫一扫
6717
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
