夏任务102:做一个GPS钟
实验要求
用RPi的串口连接一个GPS模块,从GPS得到实时时间,在7段数码管或LCD上显示
实验工具:
Raspberry Pi Model B主机,
8G c10 SD卡,
USB充电线,
电源需自备5v 1A电源充电头一个
PC机一台(这里用的操作系统是windows7 64bit旗舰版)
LED面板
GPS模块+串口线
实验步骤:
- 连接电路线路
- LCD连接参照blog:http://www.freemindworld.com/blog/2013/130310_raspberry_pi_with_lcd.shtml
- GPS连接RPI
GPS板G3203:
VDD->RPi的3.3V
TXD->RPi的RXD
GND->RPi的GND
2。在树莓派上安装pyserial:
下载地址:http://sourceforge.net/projects/pyserial/files/pyserial/2.5/
解压后进入目录 运行
python setup.py install
- 编写代码Adafruit_CharLCD.py:
(LCD显示代码引自git clone https://github.com/lifanxi/rpimenu.git)
#!/usr/bin/python
# # based on code from lrvick and LiquidCrystal # lrvic - https://github.com/lrvick/raspi-hd44780/blob/master/hd44780.py # LiquidCrystal - https://github.com/arduino/Arduino/blob/master/libraries/LiquidCrystal/LiquidCrystal.cpp #
from time import sleep import serial import traceback import os import commands import string
class Adafruit_CharLCD:
# commands LCD_CLEARDISPLAY = 0x01 LCD_RETURNHOME = 0x02 LCD_ENTRYMODESET = 0x04 LCD_DISPLAYCONTROL = 0x08 LCD_CURSORSHIFT = 0x10 LCD_FUNCTIONSET = 0x20 LCD_SETCGRAMADDR = 0x40 LCD_SETDDRAMADDR = 0x80
# flags for display entry mode LCD_ENTRYRIGHT = 0x00 LCD_ENTRYLEFT = 0x02 LCD_ENTRYSHIFTINCREMENT = 0x01 LCD_ENTRYSHIFTDECREMENT = 0x00
# flags for display on/off control LCD_DISPLAYON = 0x04 LCD_DISPLAYOFF = 0x00 LCD_CURSORON = 0x02 LCD_CURSOROFF = 0x00 LCD_BLINKON = 0x01 LCD_BLINKOFF = 0x00
# flags for display/cursor shift LCD_DISPLAYMOVE = 0x08 LCD_CURSORMOVE = 0x00
# flags for display/cursor shift LCD_DISPLAYMOVE = 0x08 LCD_CURSORMOVE = 0x00 LCD_MOVERIGHT = 0x04 LCD_MOVELEFT = 0x00
# flags for function set LCD_8BITMODE = 0x10 LCD_4BITMODE = 0x00 LCD_2LINE = 0x08 LCD_1LINE = 0x00 LCD_5x10DOTS = 0x04 LCD_5x8DOTS = 0x00
def show_time(i,interval): global num while True: try: show(num) except Exception as ep: print ep
def __init__(self, pin_rs=4, pin_e=25, pins_db=[17, 18, 27, 22], GPIO = None): # Emulate the old behavior of using RPi.GPIO if we haven't been given # an explicit GPIO interface to use if not GPIO: import RPi.GPIO as GPIO self.GPIO = GPIO self.pin_rs = pin_rs self.pin_e = pin_e self.pins_db = pins_db
self.GPIO.setmode(GPIO.BCM) self.GPIO.setup(self.pin_e, GPIO.OUT) self.GPIO.setup(self.pin_rs, GPIO.OUT)
for pin in self.pins_db: self.GPIO.setup(pin, GPIO.OUT)
self.write4bits(0x33) # initialization self.write4bits(0x32) # initialization self.write4bits(0x28) # 2 line 5x7 matrix self.write4bits(0x0C) # turn cursor off 0x0E to enable cursor self.write4bits(0x06) # shift cursor right
self.displaycontrol = self.LCD_DISPLAYON | self.LCD_CURSOROFF | self.LCD_BLINKOFF
self.displayfunction = self.LCD_4BITMODE | self.LCD_1LINE | self.LCD_5x8DOTS self.displayfunction |= self.LCD_2LINE
""" Initialize to default text direction (for romance languages) """ self.displaymode = self.LCD_ENTRYLEFT | self.LCD_ENTRYSHIFTDECREMENT self.write4bits(self.LCD_ENTRYMODESET | self.displaymode) # set the entry mode
self.clear()
def begin(self, cols, lines):
if (lines > 1): self.numlines = lines self.displayfunction |= self.LCD_2LINE self.currline = 0
def home(self):
self.write4bits(self.LCD_RETURNHOME) # set cursor position to zero self.delayMicroseconds(3000) # this command takes a long time!
def clear(self):
self.write4bits(self.LCD_CLEARDISPLAY) # command to clear display self.delayMicroseconds(3000) # 3000 microsecond sleep, clearing the display takes a long time
def setCursor(self, col, row):
self.row_offsets = [ 0x00, 0x40, 0x14, 0x54 ]
if ( row > self.numlines ): row = self.numlines - 1 # we count rows starting w/0
self.write4bits(self.LCD_SETDDRAMADDR | (col + self.row_offsets[row]))
def noDisplay(self): """ Turn the display off (quickly) """
self.displaycontrol &= ~self.LCD_DISPLAYON self.write4bits(self.LCD_DISPLAYCONTROL | self.displaycontrol)
def display(self): """ Turn the display on (quickly) """
self.displaycontrol |= self.LCD_DISPLAYON self.write4bits(self.LCD_DISPLAYCONTROL | self.displaycontrol)
def noCursor(self): """ Turns the underline cursor on/off """
self.displaycontrol &= ~self.LCD_CURSORON self.write4bits(self.LCD_DISPLAYCONTROL | self.displaycontrol)
def cursor(self): """ Cursor On """
self.displaycontrol |= self.LCD_CURSORON self.write4bits(self.LCD_DISPLAYCONTROL | self.displaycontrol)
def noBlink(self): """ Turn on and off the blinking cursor """
self.displaycontrol &= ~self.LCD_BLINKON self.write4bits(self.LCD_DISPLAYCONTROL | self.displaycontrol)
def noBlink(self): """ Turn on and off the blinking cursor """
self.displaycontrol &= ~self.LCD_BLINKON self.write4bits(self.LCD_DISPLAYCONTROL | self.displaycontrol)
def DisplayLeft(self): """ These commands scroll the display without changing the RAM """
self.write4bits(self.LCD_CURSORSHIFT | self.LCD_DISPLAYMOVE | self.LCD_MOVELEFT)
def scrollDisplayRight(self): """ These commands scroll the display without changing the RAM """
self.write4bits(self.LCD_CURSORSHIFT | self.LCD_DISPLAYMOVE | self.LCD_MOVERIGHT);
def leftToRight(self): """ This is for text that flows Left to Right """
self.displaymode |= self.LCD_ENTRYLEFT self.write4bits(self.LCD_ENTRYMODESET | self.displaymode);
def rightToLeft(self): """ This is for text that flows Right to Left """ self.displaymode &= ~self.LCD_ENTRYLEFT self.write4bits(self.LCD_ENTRYMODESET | self.displaymode)
def autoscroll(self): """ This will 'right justify' text from the cursor """
self.displaymode |= self.LCD_ENTRYSHIFTINCREMENT self.write4bits(self.LCD_ENTRYMODESET | self.displaymode)
def noAutoscroll(self): """ This will 'left justify' text from the cursor """
self.displaymode &= ~self.LCD_ENTRYSHIFTINCREMENT self.write4bits(self.LCD_ENTRYMODESET | self.displaymode)
def write4bits(self, bits, char_mode=False): """ Send command to LCD """
self.delayMicroseconds(1000) # 1000 microsecond sleep
bits=bin(bits)[2:].zfill(8)
self.GPIO.output(self.pin_rs, char_mode)
for pin in self.pins_db: self.GPIO.output(pin, False)
for i in range(4): if bits[i] == "1": self.GPIO.output(self.pins_db[::-1][i], True)
self.pulseEnable()
for pin in self.pins_db: self.GPIO.output(pin, False)
for i in range(4,8): if bits[i] == "1": self.GPIO.output(self.pins_db[::-1][i-4], True)
self.pulseEnable()
def delayMicroseconds(self, microseconds): seconds = microseconds / float(1000000) # divide microseconds by 1 million for seconds sleep(seconds)
def pulseEnable(self): self.GPIO.output(self.pin_e, False) self.delayMicroseconds(1) # 1 microsecond pause - enable pulse must be > 450ns self.GPIO.output(self.pin_e, True) self.delayMicroseconds(1) # 1 microsecond pause - enable pulse must be > 450ns self.GPIO.output(self.pin_e, False) self.delayMicroseconds(1) # commands need > 37us to settle
def message(self, text): """ Send string to LCD. Newline wraps to second line"""
for char in text: if char == '\n': self.write4bits(0xC0) # next line else: self.write4bits(ord(char),True)
if __name__ == '__main__':
lcd = Adafruit_CharLCD() mest="Lab102 GPS Clock \n time: " message="show" while True: try: tmp=ser.readline()
if tmp.find('GPRMC')==1: buf = tmp.split(',') tim = buf[1] print tim num = tim[0:8] message= mest+num lcd.clear() lcd.message(message) except Exception as e: print e #ser.close() ser = serial.Serial('/dev/ttyAMA0')
|
3.SSH连接树莓派,运行该代码,LCD显示如图:
sudo python Adafruit_CharLCD.py