个人总结OLinux上安装oracle11G Data Guard
一、准备环境
1、swap要求
swap最好设置3G以上,如果安装过程中报swap不足,可参考:
https://www.jianshu.com/p/46635a12c8d0
2、官网必须安装包列表:
Centos6
binutils-2.20.51.0.2-5.11.el6 (x86_64)
compat-libcap1-1.10-1 (x86_64)
compat-libstdc++-33-3.2.3-69.el6 (x86_64)
compat-libstdc++-33-3.2.3-69.el6.i686
gcc-4.4.4-13.el6 (x86_64)
gcc-c++-4.4.4-13.el6 (x86_64)
glibc-2.12-1.7.el6 (i686)
glibc-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6 (x86_64)
glibc-devel-2.12-1.7.el6.i686
ksh
libgcc-4.4.4-13.el6 (i686)
libgcc-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6 (x86_64)
libstdc++-4.4.4-13.el6.i686
libstdc++-devel-4.4.4-13.el6 (x86_64)
libstdc++-devel-4.4.4-13.el6.i686
libaio-0.3.107-10.el6 (x86_64)
libaio-0.3.107-10.el6.i686
libaio-devel-0.3.107-10.el6 (x86_64)
libaio-devel-0.3.107-10.el6.i686
make-3.81-19.el6
sysstat-9.0.4-11.el6 (x86_64)
centos7
binutils-2.23.52.0.1-12.el7.x86_64
compat-libcap1-1.10-3.el7.x86_64
compat-libstdc++-33-3.2.3-71.el7.i686
compat-libstdc++-33-3.2.3-71.el7.x86_64
gcc-4.8.2-3.el7.x86_64
gcc-c++-4.8.2-3.el7.x86_64
glibc-2.17-36.el7.i686
glibc-2.17-36.el7.x86_64
glibc-devel-2.17-36.el7.i686
glibc-devel-2.17-36.el7.x86_64
ksh
libaio-0.3.109-9.el7.i686
libaio-0.3.109-9.el7.x86_64
libaio-devel-0.3.109-9.el7.i686
libaio-devel-0.3.109-9.el7.x86_64
libgcc-4.8.2-3.el7.i686
libgcc-4.8.2-3.el7.x86_64
libstdc++-4.8.2-3.el7.i686
libstdc++-4.8.2-3.el7.x86_64
libstdc++-devel-4.8.2-3.el7.i686
libstdc++-devel-4.8.2-3.el7.x86_64
libXi-1.7.2-1.el7.i686
libXi-1.7.2-1.el7.x86_64
libXtst-1.2.2-1.el7.i686
libXtst-1.2.2-1.el7.x86_64
make-3.82-19.el7.x86_64
sysstat-10.1.5-1.el7.x86_64
本例子采用Oracle Linux自带的预装包实现:
详细参考:
https://docs.oracle.com/cd/E11882_01/install.112/e47689/pre_install.htm#LADBI1091
2.1.5 Installing the Oracle Preinstallation RPM or Oracle Validated RPM with ULN Support
操作系统安装后,使用oracle-rdbms-server-11gR2-preinstall包准备环境
预装包说明
https://docs.oracle.com/cd/E11882_01/install.112/e47689/pre_install.htm#LADBI1091
Start a terminal session and enter the following command as root, depending on your platform.
Oracle Linux 6:
# yum install oracle-rdbms-server-11gR2-preinstall
Oracle Linux 5 or Oracle Linux 4:
# yum install oracle-validated
You should see output indicating that you have subscribed to the Oracle Linux channel, and that packages are being installed. For example:
el5_u6_i386_base
el5_u6_x86_64_patch
Oracle Linux automatically creates a standard (not role-allocated) Oracle installation owner and groups, and sets up other kernel configuration settings as required for Oracle installations.
选择对应6.5的版本,使enable=1
[root@Oracle-A ~]# vi /etc/yum
yum/ yum.conf yum.repos.d/
[root@Oracle-A ~]# vi /etc/yum.repos.d/public-yum-ol6.repo
[public_ol6_latest]
name=Oracle Linux $releasever Latest ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=0
[public_ol6_ga_base]
name=Oracle Linux $releasever GA installation media copy ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=0
[public_ol6_u1_base]
name=Oracle Linux $releasever Update 1 installation media copy ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/1/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=0
[public_ol6_u2_base]
name=Oracle Linux $releasever Update 2 installation media copy ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/2/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=0
[public_ol6_u3_base]
name=Oracle Linux $releasever Update 3 installation media copy ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/3/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=0
[public_ol6_u4_base]
name=Oracle Linux $releasever Update 4 installation media copy ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/4/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=0
[public_ol6_u5_base]
name=Oracle Linux $releasever Update 5 installation media copy ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/5/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=1
[public_ol6_UEK_latest]
name=Latest Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=$uek
[public_ol6_UEKR3_latest]
name=Unbreakable Enterprise Kernel Release 3 for Oracle Linux $releasever ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEKR3/latest/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=$uekr3
[public_ol6_UEK_base]
name=Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
gpgcheck=1
enabled=1
~
"/etc/yum.repos.d/public-yum-ol6.repo" 69L, 2545C written
[root@Oracle-A ~]# yum install oracle-rdbms-server-11gR2-preinstall
校验结果:
[root@oel63 ~]# cd /var/log/oracle-rdbms-server-11gR2-preinstall/results/
[root@oel63 results]# ls
orakernel.log
[root@oel63 results]# more orakernel.log
Adding group oinstall with gid 54321
Adding group dba
Adding user oracle with user id 54321, initial login group oinstall, supplementary group dba and home directory /home/oracle
Changing ownership of /home/oracle to oracle:oinstall
Please set password for oracle user
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba)
Creating oracle user passed
Verifying kernel parameters as per Oracle recommendations...
Adding fs.file-max = 6815744
Adding kernel.sem = 250 32000 100 128
Adding kernel.shmmni = 4096
kernel.shmall is higher than preinstall config.
kernel.shmall = 4294967296
kernel.shmmax = 4398046511104
Changing kernel.shmmax to match preinstall config
Adding net.core.rmem_default = 262144
Adding net.core.rmem_max = 4194304
Adding net.core.wmem_default = 262144
Adding net.core.wmem_max = 1048576
Adding fs.aio-max-nr = 1048576
Adding net.ipv4.ip_local_port_range = 9000 65500
Setting kernel parameters as per oracle recommendations...
Altered file /etc/sysctl.conf
Original file backed up at /etc/sysctl.conf.orabackup
Verifying & setting of kernel parameters passed
Setting user limits using /etc/security/limits.conf
Verifying oracle user OS limits as per Oracle recommendations...
Adding oracle soft nofile 1024
Adding oracle hard nofile 65536
.............
Setting kernel boot parameters as per Oracle recommendations...
Boot parameters will be effected on next reboot
Altered file /boot/grub/grub.conf
Original file backed up at /boot/grub/grub.conf.orabackup
Verifying & setting of boot parameters passed
Disabling Transparent Hugepages.
Refer Oracle Note:1557478.1
Disabling defrag.
Refer Oracle Note:1557478.1
Taking a backup of old config files under /var/log/oracle-rdbms-server-11gR2-preinstall/backup/May-16-2014-14-53-37
#最后一句给出了相关的备份信息
#下面是查看备份文件
[root@oel63 results]# cd /var/log/oracle-rdbms-server-11gR2-preinstall/backup
[root@oel63 backup]# ls
May-16-2014-14-53-37
[root@oel63 backup]# cd May-16-2014-14-53-37/
[root@oel63 May-16-2014-14-53-37]# ls
grub.conf limits.conf orakernel.log sysctl.conf
#校验Oracle用户,注,需要为Oracle用户修改密码,此处省略
[root@oel63 ~]# cat /etc/passwd |grep oracle
oracle:x:54321:54321::/home/oracle:/bin/bash
[root@oel63 ~]# cat /etc/group |grep dba
dba:x:54322:oracle
[root@oel63 ~]# cat /etc/group |grep oinstall
oinstall:x:54321:
参考链接:
How I Simplified Oracle Database 12c and 11g Installations on Oracle Linux 6
How I Simplified Oracle Database Installation on Oracle Linux 5
Oracle 11g 在RedHat Linux 5.8_x64平台的安装手册 http://www.linuxidc.com/Linux/2014-07/104745.htm
Linux-6-64下安装Oracle 12C笔记 http://www.linuxidc.com/Linux/2013-07/86805.htm
在CentOS 6.4下安装Oracle 11gR2(x64) http://www.linuxidc.com/Linux/2014-02/97374.htm
Oracle 11gR2 在VMWare虚拟机中安装步骤 http://www.linuxidc.com/Linux/2013-09/89579p2.htm
Debian 下 安装 Oracle 11g XE R2 http://www.linuxidc.com/Linux/2014-03/98881.htm
更多Oracle相关信息见Oracle 专题页面 http://www.linuxidc.com/topicnews.aspx?tid=12
新的改变
我们对Markdown编辑器进行了一些功能拓展与语法支持,除了标准的Markdown编辑器功能,我们增加了如下几点新功能,帮助你用它写博客:
- 全新的界面设计 ,将会带来全新的写作体验;
- 在创作中心设置你喜爱的代码高亮样式,Markdown 将代码片显示选择的高亮样式 进行展示;
- 增加了 图片拖拽 功能,你可以将本地的图片直接拖拽到编辑区域直接展示;
- 全新的 KaTeX数学公式 语法;
- 增加了支持甘特图的mermaid语法1 功能;
- 增加了 多屏幕编辑 Markdown文章功能;
- 增加了 焦点写作模式、预览模式、简洁写作模式、左右区域同步滚轮设置 等功能,功能按钮位于编辑区域与预览区域中间;
- 增加了 检查列表 功能。
功能快捷键
撤销:Ctrl/Command + Z
重做:Ctrl/Command + Y
加粗:Ctrl/Command + B
斜体:Ctrl/Command + I
标题:Ctrl/Command + Shift + H
无序列表:Ctrl/Command + Shift + U
有序列表:Ctrl/Command + Shift + O
检查列表:Ctrl/Command + Shift + C
插入代码:Ctrl/Command + Shift + K
插入链接:Ctrl/Command + Shift + L
插入图片:Ctrl/Command + Shift + G
合理的创建标题,有助于目录的生成
直接输入1次#,并按下space后,将生成1级标题。
输入2次#,并按下space后,将生成2级标题。
以此类推,我们支持6级标题。有助于使用TOC
语法后生成一个完美的目录。
如何改变文本的样式
强调文本 强调文本
加粗文本 加粗文本
标记文本
删除文本
引用文本
H2O is是液体。
210 运算结果是 1024.
插入链接与图片
链接: link.
图片:
带尺寸的图片:
居中的图片:
居中并且带尺寸的图片:
当然,我们为了让用户更加便捷,我们增加了图片拖拽功能。
如何插入一段漂亮的代码片
去博客设置页面,选择一款你喜欢的代码片高亮样式,下面展示同样高亮的 代码片
.
// An highlighted block
var foo = 'bar';
生成一个适合你的列表
- 项目
- 项目
- 项目
- 项目
- 项目1
- 项目2
- 项目3
- 计划任务
- 完成任务
创建一个表格
一个简单的表格是这么创建的:
项目 | Value |
---|---|
电脑 | $1600 |
手机 | $12 |
导管 | $1 |
设定内容居中、居左、居右
使用:---------:
居中
使用:----------
居左
使用----------:
居右
第一列 | 第二列 | 第三列 |
---|---|---|
第一列文本居中 | 第二列文本居右 | 第三列文本居左 |
SmartyPants
SmartyPants将ASCII标点字符转换为“智能”印刷标点HTML实体。例如:
TYPE | ASCII | HTML |
---|---|---|
Single backticks | 'Isn't this fun?' | ‘Isn’t this fun?’ |
Quotes | "Isn't this fun?" | “Isn’t this fun?” |
Dashes | -- is en-dash, --- is em-dash | – is en-dash, — is em-dash |
创建一个自定义列表
-
Markdown
- Text-to- HTML conversion tool Authors
- John
- Luke
如何创建一个注脚
一个具有注脚的文本。2
注释也是必不可少的
Markdown将文本转换为 HTML。
KaTeX数学公式
您可以使用渲染LaTeX数学表达式 KaTeX:
Gamma公式展示 Γ ( n ) = ( n − 1 ) ! ∀ n ∈ N \Gamma(n) = (n-1)!\quad\forall n\in\mathbb N Γ(n)=(n−1)!∀n∈N 是通过欧拉积分
Γ ( z ) = ∫ 0 ∞ t z − 1 e − t d t   . \Gamma(z) = \int_0^\infty t^{z-1}e^{-t}dt\,. Γ(z)=∫0∞tz−1e−tdt.
你可以找到更多关于的信息 LaTeX 数学表达式here.
新的甘特图功能,丰富你的文章
- 关于 甘特图 语法,参考 这儿,
UML 图表
可以使用UML图表进行渲染。 Mermaid. 例如下面产生的一个序列图::
这将产生一个流程图。:
- 关于 Mermaid 语法,参考 这儿,
FLowchart流程图
我们依旧会支持flowchart的流程图:
- 关于 Flowchart流程图 语法,参考 这儿.
导出与导入
导出
如果你想尝试使用此编辑器, 你可以在此篇文章任意编辑。当你完成了一篇文章的写作, 在上方工具栏找到 文章导出 ,生成一个.md文件或者.html文件进行本地保存。
导入
如果你想加载一篇你写过的.md文件,在上方工具栏可以选择导入功能进行对应扩展名的文件导入,
继续你的创作。
注脚的解释 ↩︎