Linux客户机 virtio设备初始化
virtio设备物理上连接在pci物理总线上,逻辑上连接在virtio虚拟总线。做为pci设备便于资源分配与配置,逻辑设备模型中,便于管理与组织。
1.qemu-kvm提供的virtio pci设备
virtio-blk(硬盘),virtio-net(网络),virtio-balloon(气球)等pci设备,这些设备连接在pci总线上。代码位于qemu: hw/virtio-pci.c
static PCIDeviceInfo virtio_info[] = {
{
.qdev.name = "virtio-blk-pci",
},{
.qdev.name = "virtio-net-pci",
},{
.qdev.name = "virtio-serial-pci",
},{
.qdev.name = "virtio-balloon-pci",
},
}
static void virtio_pci_register_devices(void)
{
pci_qdev_register_many(virtio_info);
}
2.客户机PCI设备进行枚举和资源分配
当Linux客户机系统启动时,对PCI设备进行枚举和资源分配(配置PCI的配置空间),通常由BIOS完成。不过对Linux系统提供方式,一种由BIOS实现,另一种自己实现枚举和资源分配功能。代码位于kernel:arch/x86/pci/init.c
static __init int pci_arch_init(void)
{
#ifdef CONFIG_PCI_DIRECT
int type = 0;
type = pci_direct_probe();
#endif
#endif
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
#endif
}
真正设备枚举和资源分配由这里开始
static int __init pci_legacy_init(void)
{
printk("PCI: Probing PCI hardware\n");
pci_root_bus = pcibios_scan_root(0);
if (pci_root_bus)
pci_bus_add_devices(pci_root_bus);
return 0;
}
pcibios_scan_root()---->pci_scan_bus_parented()---->pci_scan_child_bus()--->pci_scan_slot()--->pci_scan_single_device()----->pci_device_add()
将PCI总线上的设备添加到链表
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.
*/
down_write(&pci_bus_sem);
list_add_tail(&dev->bus_list, &bus->devices);
up_write(&pci_bus_sem);
}
上述过程执行完成,在/sys/devices/pci0000:00目录下,创建virtio pci设备。并且在/sys/bus/pci/devices/目录下,创建相应对于pci设备的符号连接,同时在/sys/bus/pci/drivers/目录下,创建virtio-pci目录,目录下存在支持设备符号连接文件。
3.virtio总线定义与注册,virtio总线为虚拟的总线,目的为了设备管理与组织需要。代码位于:
static struct bus_type virtio_bus = {
.name = "virtio",
.match = virtio_dev_match,
.dev_attrs = virtio_dev_attrs,
.uevent = virtio_uevent,
.probe = virtio_dev_probe,
.remove = virtio_dev_remove,
};
static int virtio_init(void)
{
if (bus_register(&virtio_bus) != 0)
panic("virtio bus registration failed");
return 0;
}
上述注册函数调用执行完成,在/sys/bus/目录下,创建了一个新的目录virtio,在该目录下同时创建了两个文件夹为devices和drivers。表示创建virtio总线,总线支持设备与驱动devices和drivers目录下。
4. virtio-pci设备驱动加载
static struct pci_driver virtio_pci_driver = {
.name = "virtio-pci",
.id_table = virtio_pci_id_table,
.probe = virtio_pci_probe,
.remove = virtio_pci_remove,
#ifdef CONFIG_PM
.suspend = virtio_pci_suspend,
.resume = virtio_pci_resume,
#endif
};
static int __init virtio_pci_init(void)
{
virtio_pci_root = root_device_register("virtio-pci");
err = pci_register_driver(&virtio_pci_driver);
return err;
}
上述注册函数调用执行完成,在/sys/bus/pci/drivers和/sys/devices目录下创建了virtio-pci文件夹
5,virtio总线子设备注册
上面步骤2,对PCI设备进行枚举和资源分配中介绍了,枚举的设备,已经关联到总线链表中。对函数调用pci_register_driver(&virtio_pci_driver)就是对链表的每一个pci设备进行探测,该驱动是否支持该设备,如果支持进,调用驱动probe函数,完成启用该pci设备,同时在virtio总线进行注册设备。
bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
if (drv->probe) {
ret = drv->probe(dev);
}
static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id)
{
struct virtio_pci_device *vp_dev;
int err;
/* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */
if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f)
return -ENODEV;
/* allocate our structure and fill it out */
vp_dev = kzalloc(sizeof(struct virtio_pci_device), GFP_KERNEL);
if (vp_dev == NULL)
return -ENOMEM;
vp_dev->vdev.dev.parent = virtio_pci_root;
vp_dev->vdev.dev.release = virtio_pci_release_dev;
vp_dev->vdev.config = &virtio_pci_config_ops;
vp_dev->pci_dev = pci_dev;
INIT_LIST_HEAD(&vp_dev->virtqueues);
spin_lock_init(&vp_dev->lock);
/* Disable MSI/MSIX to bring device to a known good state. */
pci_msi_off(pci_dev);
/* enable the device */
err = pci_enable_device(pci_dev);
if (err)
goto out;
err = pci_request_regions(pci_dev, "virtio-pci");
if (err)
goto out_enable_device;
vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
if (vp_dev->ioaddr == NULL)
goto out_req_regions;
pci_set_drvdata(pci_dev, vp_dev);
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
* virtio devices and to identify the particular virtio driver by
* the subsytem ids */
vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
vp_dev->vdev.id.device = pci_dev->subsystem_device;
/* finally register the virtio device */
err = register_virtio_device(&vp_dev->vdev);
if (err)
goto out_set_drvdata;
return 0;
}
上述注册函数调用执行完成,/sys/devices/virtio-pci/创建相应子设备{virtio1,virtio2,virtio3},同时在/sys/bus/virtio/devices下面创建三个符号连接文件{virtio1,virtio2,virtio3}
6. virtio总线子设备驱动注册。
当virtio总线进行注册设备register_virtio_device,将调用virtio总线的probe函数:virtio_dev_probe()。该函数遍历驱动,找到支持驱动关联到该设备。
register_virtio_device()--->bus_probe_device()---->device_attach();
bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
if (dev->bus->probe) {
ret = dev->bus->probe(dev);
}
static int virtio_dev_probe(struct device *_d)
{
int err, i;
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
struct virtio_driver *drv = container_of(dev->dev.driver,
struct virtio_driver, driver);
u32 device_features;
/* We have a driver! */
add_status(dev, VIRTIO_CONFIG_S_DRIVER);
/* Figure out what features the device supports. */
device_features = dev->config->get_features(dev);
/* Features supported by both device and driver into dev->features. */
memset(dev->features, 0, sizeof(dev->features));
for (i = 0; i < drv->feature_table_size; i++) {
unsigned int f = drv->feature_table[i];
BUG_ON(f >= 32);
if (device_features & (1 << f))
set_bit(f, dev->features);
}
/* Transport features always preserved to pass to finalize_features. */
for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++)
if (device_features & (1 << i))
set_bit(i, dev->features);
dev->config->finalize_features(dev);
err = drv->probe(dev);
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
else
add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
return err;
}
//virtio_balloon设备驱动实例
static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
.probe = virtballoon_probe,
.remove = __devexit_p(virtballoon_remove),
.config_changed = virtballoon_changed,
};
static int __init init(void)
{
return register_virtio_driver(&virtio_balloon_driver);
}
同时在/sys/bus/virtio/drivers下面创建三个文件{virtio_balloon,virtio_blk,virtio_console},并且与设备发生关联
//
热插拔事件的产生往往是由总线驱动级的逻辑处理,所以总线一般提供事件发送函数。例如virtio总线事件函数virtio_uevent。
static int virtio_uevent(struct device *_dv, struct kobj_uevent_env *env)
{
struct virtio_device *dev = container_of(_dv,struct virtio_device,dev);
return add_uevent_var(env, "MODALIAS=virtio:d%08Xv%08X",
dev->id.device, dev->id.vendor);
}
下面函数工作流程如下:
1.由设备对象往上查找,直到找到包含kset的kobject(总线包含着kset)
2.判断kobject对象是否提供filter,name,uevent函数,如果提供,调用它。
3.分配一个kobj_uevent_env,并开始填充env环境变量:ACTION,DEVPATH,SUBSYSTEM,SEQNUM,MODALIAS
4.通过netlink发送到用户空间
register_virtio_device()---->device_register()---->device_add()---->kobject_uevent()---->kobject_uevent_env()
int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp_ext[])
{
/* search the kset we belong to */
top_kobj = kobj;
while (!top_kobj->kset && top_kobj->parent)
top_kobj = top_kobj->parent;
kset = top_kobj->kset;
uevent_ops = kset->uevent_ops;
/* skip the event, if the filter returns zero. */
if (uevent_ops && uevent_ops->filter)
if (!uevent_ops->filter(kset, kobj)) {
pr_debug("kobject: '%s' (%p): %s: filter function "
"caused the event to drop!\n",
kobject_name(kobj), kobj, __func__);
return 0;
}
/* originating subsystem */
if (uevent_ops && uevent_ops->name)
subsystem = uevent_ops->name(kset, kobj);
else
subsystem = kobject_name(&kset->kobj);
/* environment buffer */
env = kzalloc(sizeof(struct kobj_uevent_env), GFP_KERNEL);
if (!env)
return -ENOMEM;
/* complete object path */
devpath = kobject_get_path(kobj, GFP_KERNEL);
if (!devpath) {
retval = -ENOENT;
goto exit;
}
/* default keys */
retval = add_uevent_var(env, "ACTION=%s", action_string);
if (retval)
goto exit;
retval = add_uevent_var(env, "DEVPATH=%s", devpath);
if (retval)
goto exit;
retval = add_uevent_var(env, "SUBSYSTEM=%s", subsystem);
if (retval)
goto exit;
/* keys passed in from the caller */
if (envp_ext) {
for (i = 0; envp_ext[i]; i++) {
retval = add_uevent_var(env, "%s", envp_ext[i]);
if (retval)
goto exit;
}
}
/* let the kset specific function add its stuff */
if (uevent_ops && uevent_ops->uevent) {
retval = uevent_ops->uevent(kset, kobj, env);
if (retval) {
pr_debug("kobject: '%s' (%p): %s: uevent() returned "
"%d\n", kobject_name(kobj), kobj,
__func__, retval);
goto exit;
}
}
/*
* Mark "add" and "remove" events in the object to ensure proper
* events to userspace during automatic cleanup. If the object did
* send an "add" event, "remove" will automatically generated by
* the core, if not already done by the caller.
*/
if (action == KOBJ_ADD)
kobj->state_add_uevent_sent = 1;
else if (action == KOBJ_REMOVE)
kobj->state_remove_uevent_sent = 1;
/* we will send an event, so request a new sequence number */
spin_lock(&sequence_lock);
seq = ++uevent_seqnum;
spin_unlock(&sequence_lock);
retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
if (retval)
goto exit;
/* send netlink message */
if (uevent_sock) {
struct sk_buff *skb;
size_t len;
/* allocate message with the maximum possible size */
len = strlen(action_string) + strlen(devpath) + 2;
skb = alloc_skb(len + env->buflen, GFP_KERNEL);
if (skb) {
char *scratch;
/* add header */
scratch = skb_put(skb, len);
sprintf(scratch, "%s@%s", action_string, devpath);
/* copy keys to our continuous event payload buffer */
for (i = 0; i < env->envp_idx; i++) {
len = strlen(env->envp[i]) + 1;
scratch = skb_put(skb, len);
strcpy(scratch, env->envp[i]);
}
NETLINK_CB(skb).dst_group = 1;
retval = netlink_broadcast(uevent_sock, skb, 0, 1,
GFP_KERNEL);
/* ENOBUFS should be handled in userspace */
if (retval == -ENOBUFS)
retval = 0;
} else
retval = -ENOMEM;
}
用户空间
当发送信息达到了用户空间,用户空间的udevd守护进程,接受到此信息。在udev规则文件里匹配,相应的规则。
virtio设备物理上连接在pci物理总线上,逻辑上连接在virtio虚拟总线。做为pci设备便于资源分配与配置,逻辑设备模型中,便于管理与组织。
1.qemu-kvm提供的virtio pci设备
virtio-blk(硬盘),virtio-net(网络),virtio-balloon(气球)等pci设备,这些设备连接在pci总线上。代码位于qemu: hw/virtio-pci.c
static PCIDeviceInfo virtio_info[] = {
{
.qdev.name = "virtio-blk-pci",
},{
.qdev.name = "virtio-net-pci",
},{
.qdev.name = "virtio-serial-pci",
},{
.qdev.name = "virtio-balloon-pci",
},
}
static void virtio_pci_register_devices(void)
{
pci_qdev_register_many(virtio_info);
}
2.客户机PCI设备进行枚举和资源分配
当Linux客户机系统启动时,对PCI设备进行枚举和资源分配(配置PCI的配置空间),通常由BIOS完成。不过对Linux系统提供方式,一种由BIOS实现,另一种自己实现枚举和资源分配功能。代码位于kernel:arch/x86/pci/init.c
static __init int pci_arch_init(void)
{
#ifdef CONFIG_PCI_DIRECT
int type = 0;
type = pci_direct_probe();
#endif
#endif
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
#endif
}
真正设备枚举和资源分配由这里开始
static int __init pci_legacy_init(void)
{
printk("PCI: Probing PCI hardware\n");
pci_root_bus = pcibios_scan_root(0);
if (pci_root_bus)
pci_bus_add_devices(pci_root_bus);
return 0;
}
pcibios_scan_root()---->pci_scan_bus_parented()---->pci_scan_child_bus()--->pci_scan_slot()--->pci_scan_single_device()----->pci_device_add()
将PCI总线上的设备添加到链表
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.
*/
down_write(&pci_bus_sem);
list_add_tail(&dev->bus_list, &bus->devices);
up_write(&pci_bus_sem);
}
上述过程执行完成,在/sys/devices/pci0000:00目录下,创建virtio pci设备。并且在/sys/bus/pci/devices/目录下,创建相应对于pci设备的符号连接,同时在/sys/bus/pci/drivers/目录下,创建virtio-pci目录,目录下存在支持设备符号连接文件。
3.virtio总线定义与注册,virtio总线为虚拟的总线,目的为了设备管理与组织需要。代码位于:
static struct bus_type virtio_bus = {
.name = "virtio",
.match = virtio_dev_match,
.dev_attrs = virtio_dev_attrs,
.uevent = virtio_uevent,
.probe = virtio_dev_probe,
.remove = virtio_dev_remove,
};
static int virtio_init(void)
{
if (bus_register(&virtio_bus) != 0)
panic("virtio bus registration failed");
return 0;
}
上述注册函数调用执行完成,在/sys/bus/目录下,创建了一个新的目录virtio,在该目录下同时创建了两个文件夹为devices和drivers。表示创建virtio总线,总线支持设备与驱动devices和drivers目录下。
4. virtio-pci设备驱动加载
static struct pci_driver virtio_pci_driver = {
.name = "virtio-pci",
.id_table = virtio_pci_id_table,
.probe = virtio_pci_probe,
.remove = virtio_pci_remove,
#ifdef CONFIG_PM
.suspend = virtio_pci_suspend,
.resume = virtio_pci_resume,
#endif
};
static int __init virtio_pci_init(void)
{
virtio_pci_root = root_device_register("virtio-pci");
err = pci_register_driver(&virtio_pci_driver);
return err;
}
上述注册函数调用执行完成,在/sys/bus/pci/drivers和/sys/devices目录下创建了virtio-pci文件夹
5,virtio总线子设备注册
上面步骤2,对PCI设备进行枚举和资源分配中介绍了,枚举的设备,已经关联到总线链表中。对函数调用pci_register_driver(&virtio_pci_driver)就是对链表的每一个pci设备进行探测,该驱动是否支持该设备,如果支持进,调用驱动probe函数,完成启用该pci设备,同时在virtio总线进行注册设备。
bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
if (drv->probe) {
ret = drv->probe(dev);
}
static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id)
{
struct virtio_pci_device *vp_dev;
int err;
/* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */
if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f)
return -ENODEV;
/* allocate our structure and fill it out */
vp_dev = kzalloc(sizeof(struct virtio_pci_device), GFP_KERNEL);
if (vp_dev == NULL)
return -ENOMEM;
vp_dev->vdev.dev.parent = virtio_pci_root;
vp_dev->vdev.dev.release = virtio_pci_release_dev;
vp_dev->vdev.config = &virtio_pci_config_ops;
vp_dev->pci_dev = pci_dev;
INIT_LIST_HEAD(&vp_dev->virtqueues);
spin_lock_init(&vp_dev->lock);
/* Disable MSI/MSIX to bring device to a known good state. */
pci_msi_off(pci_dev);
/* enable the device */
err = pci_enable_device(pci_dev);
if (err)
goto out;
err = pci_request_regions(pci_dev, "virtio-pci");
if (err)
goto out_enable_device;
vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
if (vp_dev->ioaddr == NULL)
goto out_req_regions;
pci_set_drvdata(pci_dev, vp_dev);
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
* virtio devices and to identify the particular virtio driver by
* the subsytem ids */
vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
vp_dev->vdev.id.device = pci_dev->subsystem_device;
/* finally register the virtio device */
err = register_virtio_device(&vp_dev->vdev);
if (err)
goto out_set_drvdata;
return 0;
}
上述注册函数调用执行完成,/sys/devices/virtio-pci/创建相应子设备{virtio1,virtio2,virtio3},同时在/sys/bus/virtio/devices下面创建三个符号连接文件{virtio1,virtio2,virtio3}
6. virtio总线子设备驱动注册。
当virtio总线进行注册设备register_virtio_device,将调用virtio总线的probe函数:virtio_dev_probe()。该函数遍历驱动,找到支持驱动关联到该设备。
register_virtio_device()--->bus_probe_device()---->device_attach();
bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
if (dev->bus->probe) {
ret = dev->bus->probe(dev);
}
static int virtio_dev_probe(struct device *_d)
{
int err, i;
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
struct virtio_driver *drv = container_of(dev->dev.driver,
struct virtio_driver, driver);
u32 device_features;
/* We have a driver! */
add_status(dev, VIRTIO_CONFIG_S_DRIVER);
/* Figure out what features the device supports. */
device_features = dev->config->get_features(dev);
/* Features supported by both device and driver into dev->features. */
memset(dev->features, 0, sizeof(dev->features));
for (i = 0; i < drv->feature_table_size; i++) {
unsigned int f = drv->feature_table[i];
BUG_ON(f >= 32);
if (device_features & (1 << f))
set_bit(f, dev->features);
}
/* Transport features always preserved to pass to finalize_features. */
for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++)
if (device_features & (1 << i))
set_bit(i, dev->features);
dev->config->finalize_features(dev);
err = drv->probe(dev);
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
else
add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
return err;
}
//virtio_balloon设备驱动实例
static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
.probe = virtballoon_probe,
.remove = __devexit_p(virtballoon_remove),
.config_changed = virtballoon_changed,
};
static int __init init(void)
{
return register_virtio_driver(&virtio_balloon_driver);
}
同时在/sys/bus/virtio/drivers下面创建三个文件{virtio_balloon,virtio_blk,virtio_console},并且与设备发生关联
//
热插拔事件的产生往往是由总线驱动级的逻辑处理,所以总线一般提供事件发送函数。例如virtio总线事件函数virtio_uevent。
static int virtio_uevent(struct device *_dv, struct kobj_uevent_env *env)
{
struct virtio_device *dev = container_of(_dv,struct virtio_device,dev);
return add_uevent_var(env, "MODALIAS=virtio:d%08Xv%08X",
dev->id.device, dev->id.vendor);
}
下面函数工作流程如下:
1.由设备对象往上查找,直到找到包含kset的kobject(总线包含着kset)
2.判断kobject对象是否提供filter,name,uevent函数,如果提供,调用它。
3.分配一个kobj_uevent_env,并开始填充env环境变量:ACTION,DEVPATH,SUBSYSTEM,SEQNUM,MODALIAS
4.通过netlink发送到用户空间
register_virtio_device()---->device_register()---->device_add()---->kobject_uevent()---->kobject_uevent_env()
int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp_ext[])
{
/* search the kset we belong to */
top_kobj = kobj;
while (!top_kobj->kset && top_kobj->parent)
top_kobj = top_kobj->parent;
kset = top_kobj->kset;
uevent_ops = kset->uevent_ops;
/* skip the event, if the filter returns zero. */
if (uevent_ops && uevent_ops->filter)
if (!uevent_ops->filter(kset, kobj)) {
pr_debug("kobject: '%s' (%p): %s: filter function "
"caused the event to drop!\n",
kobject_name(kobj), kobj, __func__);
return 0;
}
/* originating subsystem */
if (uevent_ops && uevent_ops->name)
subsystem = uevent_ops->name(kset, kobj);
else
subsystem = kobject_name(&kset->kobj);
/* environment buffer */
env = kzalloc(sizeof(struct kobj_uevent_env), GFP_KERNEL);
if (!env)
return -ENOMEM;
/* complete object path */
devpath = kobject_get_path(kobj, GFP_KERNEL);
if (!devpath) {
retval = -ENOENT;
goto exit;
}
/* default keys */
retval = add_uevent_var(env, "ACTION=%s", action_string);
if (retval)
goto exit;
retval = add_uevent_var(env, "DEVPATH=%s", devpath);
if (retval)
goto exit;
retval = add_uevent_var(env, "SUBSYSTEM=%s", subsystem);
if (retval)
goto exit;
/* keys passed in from the caller */
if (envp_ext) {
for (i = 0; envp_ext[i]; i++) {
retval = add_uevent_var(env, "%s", envp_ext[i]);
if (retval)
goto exit;
}
}
/* let the kset specific function add its stuff */
if (uevent_ops && uevent_ops->uevent) {
retval = uevent_ops->uevent(kset, kobj, env);
if (retval) {
pr_debug("kobject: '%s' (%p): %s: uevent() returned "
"%d\n", kobject_name(kobj), kobj,
__func__, retval);
goto exit;
}
}
/*
* Mark "add" and "remove" events in the object to ensure proper
* events to userspace during automatic cleanup. If the object did
* send an "add" event, "remove" will automatically generated by
* the core, if not already done by the caller.
*/
if (action == KOBJ_ADD)
kobj->state_add_uevent_sent = 1;
else if (action == KOBJ_REMOVE)
kobj->state_remove_uevent_sent = 1;
/* we will send an event, so request a new sequence number */
spin_lock(&sequence_lock);
seq = ++uevent_seqnum;
spin_unlock(&sequence_lock);
retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
if (retval)
goto exit;
/* send netlink message */
if (uevent_sock) {
struct sk_buff *skb;
size_t len;
/* allocate message with the maximum possible size */
len = strlen(action_string) + strlen(devpath) + 2;
skb = alloc_skb(len + env->buflen, GFP_KERNEL);
if (skb) {
char *scratch;
/* add header */
scratch = skb_put(skb, len);
sprintf(scratch, "%s@%s", action_string, devpath);
/* copy keys to our continuous event payload buffer */
for (i = 0; i < env->envp_idx; i++) {
len = strlen(env->envp[i]) + 1;
scratch = skb_put(skb, len);
strcpy(scratch, env->envp[i]);
}
NETLINK_CB(skb).dst_group = 1;
retval = netlink_broadcast(uevent_sock, skb, 0, 1,
GFP_KERNEL);
/* ENOBUFS should be handled in userspace */
if (retval == -ENOBUFS)
retval = 0;
} else
retval = -ENOMEM;
}
用户空间
当发送信息达到了用户空间,用户空间的udevd守护进程,接受到此信息。在udev规则文件里匹配,相应的规则。